Giancarlo Cordasco

Effectiveness of orthodontic treatment with functional appliances on mandibular growth in the short term

INTRODUCTION The aim of this study was to analyze the current literature for the best evidence (randomized clinical trials) about the efficacy of functional appliances on mandibular growth in the short term. METHODS A survey of articles published up to September 2009 was performed by using the following electronic databases: PubMed, Embase, Ovid Medline, Cochrane Central Register of Controlled Trials, Web of Science, LILACS, and Google Scholar. The reference lists of the retrieved articles were hand-searched for possible missing articles. No language restriction was applied during the identification of the published studies. A methodologic scoring process was developed to identify which randomized clinical trials were stronger methodologically. The selection process and the quality assessment were undertaken independently and in duplicate by 2 authors. A meta-analysis was attempted by using random-effects models. Clinical and statistical heterogeneity was examined, and a sensitivity analysis was performed. RESULTS Electronic searches identified the following items: 146 articles were retrieved from PubMed, 45 from Cochrane Central Register of Controlled Trials, 29 from Ovid, 42 from LILACS, 628 from Web of Science, and 1000 from Google Scholar. Thirty-two articles fulfilled the specific inclusion criteria and were identified as potentially appropriate randomized clinical trials to be included in this meta-analysis. Only 4 articles, based on data from 338 patients (168 treated vs 170 controls) with Class II malocclusion in the mixed dentition, were selected for the final analysis. The quality analysis of these studies showed that the statistical methods were at the medium-high level. The outcome measurements chosen to evaluate the efficacy of the various functional appliances were Co-Pg, Pg/Olp + Co/Olp, and Co-Gn and the values were annualized and standardized to a uniform scale with the standardized mean differences (SMD). The results of the meta-analysis from the random-effects model showed a statistically significant difference of 1.79 mm in annual mandibular growth of the treatment group compared with the control group (SMD = 0.61, 95% CI, 0.30 to -0.93; chi-square test, 5.34; 3 df; P = 0.15; I(2) = 43.9%; test for overall effect, Z = 3.83 and P = 0.0001). The sensitivity analysis showed a substantially similar outcome of 1.91 mm (SMD = 0.65, 95% CI, 0.25 to 1.25; chi-square test, 4.96; 2 df; P = 0.08; I(2) = 59.7%; test for overall effect, Z = 3.19 and P = 0.001). CONCLUSIONS The analysis of the effect of treatment with functional appliances vs an untreated control group showed that skeletal changes were statistically significant, but unlikely to be clinically significant.

Effects of etanercept, a tumour necrosis factor‐α antagonist, in an experimental model of periodontitis in rats

Etanercept is a tumour necrosis factor antagonist with anti‐inflammatory effects. The aim of our study was to evaluate, for the first time, the therapeutic efficacy of in vivo inhibition of TNF‐α in an experimental model of periodontitis.

Condylar volume and surface in Caucasian young adult subjects

BackgroundThere have been no quantitative standards for volumetric and surface measurements of the mandibular condyle in Caucasian population. However, the recently developed cone-beam computed tomography (CBCT) system allows measurement of these parameters with high accuracy.MethodsCBCT was used to measure the condylar volume, surface and the volume to surface ratio, called the Morphometric Index (MI), of 300 temporo-mandibular joints (TMJ) in 150 Caucasian young adult subjects, with varied malocclusions, without pain or dysfunction of TMJs.ResultsThe condylar volume was 691.26 ± 54.52 mm3 in males and 669.65 ± 58.80 mm3 in, and was significantly higher (p< 0.001) in the males. The same was observed for the condylar surface, although without statistical significance (406.02 ± 55.22 mm2 in males and 394.77 ± 60.73 mm2 in females).Furthermore, the condylar volume (693.61 ± 62.82 mm3 ) in the right TMJ was significantly higher than in the left (666.99 ± 48.67 mm3, p < 0.001) as was the condylar surface (411.24 ± 57.99 mm2 in the right TMJ and 389.41 ± 56.63 mm2 in the left TMJ; t = 3.29; p < 0.01). The MI is 1.72 ± 0.17 for the whole sample, with no significant difference between males and females or the right and left sides.ConclusionThese data from temporomandibular joints of patients without pain or clinical dysfunction might serve as examples of normal TMJs in the general population not seeking orthodontic care.

Effects of Hypericum Perforatum, in a rodent model of periodontitis

BackgroundHypericum perforatum is a medicinal plant species containing many polyphenolic compounds, namely flavonoids and phenolic acids. In this study we evaluate the effect of Hypericum perforatum in animal model of periodontitis.MethodsPeriodontitis was induced in adult male Sprague-Dawley rats by placing a nylon thread ligature around the lower 1st molars. Hypericum perforatum was administered at the dose of 2 mg/kg os, daily for eight days. At day 8, the gingivomucosal tissue encircling the mandibular first molar was removed.ResultsPeriodontitis in rats resulted in an inflammatory process characterized by edema, neutrophil infiltration and cytokine production that was followed by the recruitment of other inflammatory cells, production of a range of inflammatory mediators such as NF-κB and iNOS expression, the nitration of tyrosine residues and activation of the nuclear enzyme poly (ADP-ribose) polymerase; apoptosis and the degree of gingivomucosal tissues injury. We report here that Hypericum perforatum exerts potent anti-inflammatory effects significantly reducing all of the parameters of inflammation as described above.ConclusionsTaken together, our results clearly demonstrate that treatment with Hypericum reduces the development of inflammation and tissue injury, events associated with periodontitis.

In vitro evaluation of the frictional forces between brackets and archwire with three passive self-ligating brackets.

The aim of this in vitro study was to evaluate the frictional forces between bracket and archwire that included three passive self-ligating brackets (Damon SL2 SDS). The brackets were individually bonded to a brass mount using a preformed 0.021 x 0.025 inch stainless steel wire jig in order to exclude adverse tipping or torsion. The central bracket was positioned 1 mm higher than the others, in order that the three brackets were vertically unaligned. Thirty-six similar set-ups including in total 108 brackets were investigated using the same wire: copper (nickel-titanium) 0.014 inches. A testing machine was designed and constructed to measure the frictional forces between the wire and the three-bracket set-up. Twelve set-ups were tested to measure kinetic frictional forces between the wire and unaligned passive self-ligating brackets used in the closed position. The frictional properties of two sets of 12 three-bracket set-ups (control) were tested and measured with an open slide and conventional ligation. A stainless steel ligature wire was used in the former, while elastomeric modules were employed in the latter. One-way analysis of variance showed a significant effect of ligation mode on the frictional properties of the three-bracket set-ups (P < 0.001). Post hoc pairwise comparison showed that the frictional forces arising from passive self-ligation were significantly lower (P < 0.01) than those resulting from elastic ligation. The same result was achieved when comparing self-ligation and metallic ligation (P < 0.01). No significant difference was found when comparing elastic and metallic ligation.

Effects of orthopedic maxillary expansion on nasal cavity size in growing subjects: A low dose computer tomography clinical trial

OBJECTIVE The aim of this retrospective clinical trial was to evaluate the effects of rapid maxillary expansion on skeletal nasal cavity size in growing subjects by use of low dose computer tomography. METHODS Eight Caucasian children (three male; five female) with a mean age of 9.7 years (SD±1.41) were the final sample of this research that underwent palatal expansion as a first phase of orthodontic treatment. The maxillary expander was banded to the upper first molars and was activated according a rapid maxillary expansion protocol. Low-dose computer tomography examinations of maxilla and of the low portion of nasal cavity were performed before inserting the maxillary expander (T0) and at the end of retention (T1), 7 months later. A low-dose computer tomography protocol was applied during the exams. Image processing was achieved in 3 steps: reslicing; dental and skeletal measurements; skeletal nasal volume computing. A set of reproducible skeletal and dental landmarks were located in the coronal passing through the first upper right molar furcation. Using the landmarks, a set of transverse linear measurements were identified to estimate maximum nasal width and nasal floor width. To compute the nasal volume the lower portion of the nasal cavity was set as region of interest. Nasal volume was calculated using a set of coronal slices. In each coronal slice, the cortical bone of the nasal cavity was identified and selected with a segmentation technique. Dependent t-tests were used to evaluate changes due to expansion. For all tests, a significance level of P<0.05 was used. RESULTS Rapid maxillary expansion produced significant increases of linear transverse skeletal measurements, these increments were bigger in the lower portion of the nasal cavities: nasal floor width (+3.15 mm; SD ± 0.99), maximum nasal width (+2.47 mm; SD ± 0.99). Rapid maxillary expansion produced significant increment of the total nasal volume (+1.27 cm(3) ± SD 0.65). The anterior volume increase was 0.58 cm(3) while the posterior one was 0.69 cm(3). CONCLUSION In growing subjects RME is able to significantly enlarge the dimension of nasal cavity. The increment is bigger in the lower part of the nose and equally distributed between the anterior e the posterior part of the nasal cavity.

Immunohistochemical analysis of TGF-β1 and VEGF in gingival and periodontal tissues: A role of these biomarkers in the pathogenesis of scleroderma and periodontal disease

Periodontal disease is characterized by inflammation and bone loss. The balance between inflammatory mediators and their counter-regulatory molecules may be fundamental for determining the outcome of the immune pathology of periodontal disease. Transforming growth factor-β (TGF-β) and vascular endothelial growth factor (VEGF) represent a family of polypeptide proteins involved in the inflammation and regulation of immune responses, especially in rheumatic disease. The relationship between these growth factors and periodontitis has resulted in a new field of osteoimmunology and provides a context for better understanding the pathogenesis of periodontal disease. Therefore, the aim of this study was to compare the protein expression profile of these inflammatory mediators in 90 patients divided in three groups: healthy control, chronic periodontitis and in rheumatic disease, scleroderma. The findings presented here highlight that biomarkers, such as TGF-β1 and VEGF, play a key role in the evolution of the immune response, which in turn influences the outcome of disease establishment.

Load–deflection characteristics of superelastic and thermal nickel–titanium wires

The aim of this study was to investigate the mechanical properties of superelastic and thermal nickel-titanium (NiTi) archwires for correct selection of orthodontic wires. Seven different NiTi wires of two different sizes (0.014 and 0.016 inches), commonly used during the alignment phase, were tested. A three-point bending test was carried out to evaluate the load-deflection characteristics. The archwires were subjected to bending at a constant temperature of 37°C and deflections of 2 and 4 mm. Analysis of variance showed that thermal NiTi wires exerted significantly lower working forces than superelastic wires of the same size in all experimental tests (P < 0.05). Wire size had a significant effect on the forces produced: with an increase in archwire dimension, the released strength increased for both thermal and superelastic wires. Superelastic wires showed, at a deflection of 2 mm, narrow and steep hysteresis curves in comparison with the corresponding thermal wires, which presented a wide interval between loading and unloading forces. During unloading at 4 mm of deflection, all wires showed curves with a wider plateau when compared with 2 mm deflection. Such a difference for the superelastic wires was caused by the martensite stress induced at higher deformation levels. A comprehensive understanding of mechanical characteristics of orthodontic wires is essential and selection should be undertaken in accordance with the behaviour of the different wires. It is also necessary to take into account the biomechanics used. In low-friction mechanics, thermal NiTi wires are to be preferred to superelastic wires, during the alignment phase due to their lower working forces. In conventional straightwire mechanics, a low force archwire would be unable to overcome the resistance to sliding.

Influence of bracket-slot design on the forces released by superelastic nickel-titanium alignment wires in different deflection configurations.

OBJECTIVE To evaluate how different bracket-slot design characteristics affect the forces released by superelastic nickel-titanium (NiTi) alignment wires at different amounts of wire deflection. MATERIALS AND METHODS A three-bracket bending and a classic-three point bending testing apparatus were used to investigate the load-deflection properties of one superelastic 0.014-inch NiTi alignment wire in different experimental conditions. The selected NiTi archwire was tested in association with three bracket systems: (1) conventional twin brackets with a 0.018-inch slot, (2) a self-ligating bracket with a 0.018-inch slot, and (3) a self-ligating bracket with a 0.022-inch slot. Wire specimens were deflected at 2 mm and 4 mm. RESULTS Use of a 0.018-inch slot bracket system, in comparison with use of a 0.022-inch system, increases the force exerted by the superelastic NiTi wires at a 2-mm deflection. Use of a self-ligating bracket system increases the force released by NiTi wires in comparison with the conventional ligated bracket system. NiTi wires deflected to a different maximum deflection (2 mm and 4 mm) release different forces at the same unloading data point (1.5 mm). CONCLUSION Bracket design, type of experimental test, and amount of wire deflection significantly affected the amount of forces released by superelastic NiTi wires (P<.05). This phenomenon offers clinicians the possibility to manipulate the wires load during alignment.

Transglutaminase 2 up-regulation is associated with RANKL/OPG pathway in cultured HPDL cells and THP-1-differentiated macrophages

Recent evidence emphasized that transglutaminase 2 (TG2), a protein cross-linking enzyme, may play a role in the early phase of inflammation. High levels of TG2 have been associated with the constitutive activation of nuclear factor-kappa B (NF-κB) that is considered the main regulator of inflammation. In this context, the receptor activator of NF-kappa B ligand (RANKL) and receptor activator of NF-κB have extensive functions in the regulation of cytokine secretion associated with different pathological conditions. The human periodontal ligament (HPDL) cells, which express and secrete osteoprotegerin (OPG) and RANKL, represent an useful “ex vivo” model for monitoring cell response in inflammatory microenvironments, such as periodontitis-dependent tissue response. Thus, we evaluated TG2 expression and alterations in RANKL/OPG ratio occurring in cultured HPDL cells. The HPDL cells were obtained from patients with chronic periodontitis (CP) and healthy subjects. We observed the up-regulation of some inflammatory markers, such as IL-6, TNF-α, and HMGB-1, and at the same time an increase in TG2 mRNA levels in HPDL cells from CP patients compared with healthy subjects. We found a positive correlation between RANKL/OPG ratio and TG2 mRNA levels in HPDL cells from CP patients. In the parallel experiments, we demonstrated that TG2 inhibition reduced RANKL expression in both HPDL cells from CP patients and monocytes differentiated to macrophages by tetradecanoyl phorbol acetate treatment. Given the RANKL key role in NF-κB pathway and the observed up-regulation of pro-inflammatory cytokines, our data suggest that TG2 may be involved in molecular mechanisms of inflammatory response occurring in periodontal disease.