Gibum Kwon

Hygro-responsive membranes for effective oil-water separation.

There is a critical need for new energy-efficient solutions to separate oil-water mixtures, especially those stabilized by surfactants. Traditional membrane-based separation technologies are energy-intensive and limited, either by fouling or by the inability of a single membrane to separate all types of oil-water mixtures. Here we report membranes with hygro-responsive surfaces, which are both superhydrophilic and superoleophobic, in air and under water. Our membranes can separate, for the first time, a range of different oil-water mixtures in a single-unit operation, with >99.9% separation efficiency, by using the difference in capillary forces acting on the two phases. Our separation methodology is solely gravity-driven and consequently is expected to be highly energy-efficient. We anticipate that our separation methodology will have numerous applications, including the clean-up of oil spills, wastewater treatment, fuel purification and the separation of commercially relevant emulsions.

On‐Demand Separation of Oil‐Water Mixtures

In this work, the first-ever membrane-based single unit operation that enables gravity driven, on-demand separation of various oil-water mixtures is developed. Using this methodology, the on-demand separation of free oil and water, oil-in-water emulsions, and water-in-oil emulsions is demonstrated, with ≥99.9% separation efficiency. A scaled-up apparatus to separate larger quantities (several liters) of oil-water emulsions is also developed.

Wettability engendered templated self-assembly (WETS) for fabricating multiphasic particles.

Precise control over the geometry and chemistry of multiphasic particles is of significant importance for a wide range of applications. In this work, we have developed one of the simplest methodologies for fabricating monodisperse, multiphasic micro- and nanoparticles possessing almost any composition, projected shape, modulus, and dimensions as small as 25 nm. The synthesis methodology involves the fabrication of a nonwettable surface patterned with monodisperse, wettable domains of different sizes and shapes. When such patterned templates are dip-coated with polymer solutions or particle dispersions, the liquids, and consequently the polymer or the particles, preferentially self-assemble within the wettable domains. Utilizing this phenomenon, we fabricate multiphasic assemblies with precisely controlled geometry and composition through multiple, layered depositions of polymers and/or particles within the patterned domains. Upon releasing these multiphasic assemblies from the template using a sacrificial layer, we obtain multiphasic particles. The templates can then be readily reused (over 20 times in our experiments) for fabricating a new batch of particles, enabling a rapid, inexpensive, and easily reproducible method for large-scale manufacturing of multiphasic particles.

Metallic superhydrophobic surfaces via thermal sensitization

Superhydrophobic surfaces (i.e., surfaces extremely repellent to water) allow water droplets to bead up and easily roll off from the surface. While a few methods have been developed to fabricate metallic superhydrophobic surfaces, these methods typically involve expensive equipment, environmental hazards, or multi-step processes. In this work, we developed a universal, scalable, solvent-free, one-step methodology based on thermal sensitization to create appropriate surface texture and fabricate metallic superhydrophobic surfaces. To demonstrate the feasibility of our methodology and elucidate the underlying mechanism, we fabricated superhydrophobic surfaces using ferritic (430) and austenitic (316) stainless steels (representative alloys) with roll off angles as low as 4° and 7°, respectively. We envision that our approach will enable the fabrication of superhydrophobic metal alloys for a wide range of civilian and military applications.

CHAPTER 12: Oil-Water Separation with Selective Wettability Membranes

Every day millions of gallons of oil–water mixtures are produced in industries ranging from oil extraction, fracking and mining, to wastewater treatment. Separating these mixtures involves multiple unit operations, which can be expensive and sometimes insufficient, especially as environmental restrictions become increasingly strict on contaminants in discharged water. Other occurrences, such as large oil spills, also require new technologies that enable effective yet economic clean-up. Energy efficient, selective wettability-based membrane technology has the potential to meet these needs. In this chapter, we discuss the fundamentals of wettability and how they can be applied to systematically design membranes with selective wettability that can readily separate free oil and water, as well as emulsions. We also look at membrane surface morphology, surface energy, and the relationships that govern the selective breakthrough of an oil or water phase. Finally, we discuss the recent work in developing oil–water separation membranes based on the idea of selective wettability, the merits and shortcomings of each approach, and the potential areas of future interest in the field.