Gin-ichiro Hata

Sealing ability of Thermafil with and without sealer

The purpose of this study was to evaluate the apical sealing ability of root canals filled using three obturating techniques. Sixteen maxillary first molars were obturated with Thermafil, 16 with Thermafil and a ZOE sealer, and 16 with laterally condensed gutta-percha. Two canal instrumentation methods were used, conventional step-back preparation with K-Flex files and traditional instrumentation combining reaming with reamers and filing with K-Flex files. Following obturation, the teeth were prepared for evaluation of the seal using India ink and a Profile Projector. The depth of penetration of the dye was statistically evaluated for each of the three roots with an analysis of variance. For sealing ability, there was no significant difference at the p < 0.05 level between the conventional step-back preparation and the traditional instrumentation technique. However, a significant difference was present at the p < 0.05 level for the obturation techniques. The mean linear dye penetration for the Thermafil technique was greater than that for lateral condensation.

A Comparison of Shaping Ability Using ProFile, GT File, and Flex-R Endodontic Instruments in Simulated Canals

A total of 160 resin-simulated canal blocks with 20-degree or 30-degree curvature were prepared by ProFile rotary instruments, GT rotary files, and the balanced force technique with Flex-R files. Using an image analysis computer application, the pre- and postoperative images were stored and superimposed, and then the amount of material removed from the preoperative inner and outer curved walls was measured at five levels in the apical 5 mm of the canal. The time required for canal preparation, including irrigation, and the time taken to change instruments was recorded. At 1 mm from the apical end, the directions of canal transportation were most frequently toward the outer aspect of the curvature, with the only exception being the canals shaped by the balanced force technique in which more was removed from the inner aspect. The balanced force technique required more preparation time than the rotary instrumentation.

Effectiveness of eucalyptol and d-limonene as gutta-percha solvents

Eucalyptol and d-limonene were evaluated for their ability to serve as a substitute solvent for chloroform. The amount of time required to soften and remove the gutta-percha in 72 instrumented and filled simulated root canals in epoxy blocks was measured. After preparation to the apices of the block canals with a #60 file, four different filling techniques were used. These obturations were softened with each solvent and then removed, first using a #15 Hedstrom file inserted to full working length, and then removing the remaining filling mass with a #60 reamer. The two instrument placements were timed: one for the Hedstrom file insertion to the apex and the other for the reamer to remove the filling material. Neither the different solvents nor the filling techniques had a significant effect on the times required for the H-files to reach the apex. However, the times for the reamer to remove the filling materials were effected both by the filling techniques and the solvents used.

Removal of smear layer in the root canal using oxidative potential water

We investigated oxidative potential water (OPW) for its ability to remove the smear layer using a scanning electron microscope. OPW has been studied mainly in Japan and is known to suppress bacteria and viruses without harming living systems. We found that OPW used as in irrigant during and after root canal instrumentation is as effective as 5% NaOCl or 17% EDTA for opening and keeping patent the dentinal tubules.

Sealing ability of thermoplasticized gutta-percha fill techniques as assessed by a new method of determining apical leakage

One hundred fifty-nine extracted single-rooted maxillary human teeth were instrumented and randomly divided into nine groups of 17 teeth each and 6 control teeth. Experimental groups were obturated with Thermafil, Obtura II, Ultrafil Regular Set gutta-percha, and Ultrafil Firm Set gutta-percha, each with or without root canal sealer. A control group was obturated using the lateral condensation technique and sealer. Teeth were immersed in a resorcinol-formaldehyde resin for 5 days at 4 degrees C, and the resin was allowed to polymerize completely for 4 days at room temperature. Teeth were then sectioned horizontally at 1.5, 2.5, and 3.5 mm from the anatomical apex, and examined under a stereomicroscope at x25 magnification. The resin filled the spaces in the gap between the canal wall and the gutta-percha and this was measured at each of the three levels. The ratio of the area of the resin to the total area of the canal was obtained as the mean leakage area. The results showed no significant difference in the mean leakage area at the same level for the different obturation materials. However, the leakage was significantly less for all materials when root canal sealer was used.

Treatment of dens invaginatus by endodontic therapy, apicocurettage, and retrofilling.

Dens invaginatus was successfully treated using apicocurettage and retrofilling following conventional root canal therapy. Two years postoperatively the tooth was asymptomatic and the lesion appeared radiographically to be healed.

A Comparison of Mesial Molar Root Canal Preparations Using Two Engine-Driven Instruments and the Balanced-Force Technique

The purpose of this study was to compare the effects of two engine-driven, nickel-titanium instrument systems with hand files in the final shape of slight and moderately curved canals. A total of 72 mesial roots of extracted human mandibular molars were divided into three groups: ProFile .04 taper, Pow-R rotary systems, and Flex-R hand-filing technique. The roots were mounted and cross-sectioned at two different horizontal levels using a modified Bramante technique. Pre- and postinstrumented cross-sectional roots were imaged, recorded, and computer analyzed. Results showed that, at the middle third, in almost all groups, there was a tendency of cutting more toward the mesial side with only one exception: Pow-R cut more to the distal side (danger zone) (p < 0.02). At the apical third, Flex-R (p < 0.03) and ProFile (0.001) transported to the mesial side (danger zone) when the curvature increased. When the three techniques were compared analyzing each side and considering the two groups of curvature, at the middle third in the moderately curved-canal group, Flex-R cut statistically more than Pow-R toward the lingual side. The other comparisons showed no statistically significant difference. When the techniques were compared in relation with the degree of curvature, in the apical third, ProFile .04 cut statistically more toward the mesial side in the moderately curved canal group than in the slightly curved canal group. The other comparisons showed no statistically significant difference. Canal preparation time was shorter with hand instrumentation (p < .05) in a few instances.

Systemic distribution of 14C-labeled formaldehyde applied in the root canal following pulpectomy

The systemic distribution of 14C-labeled formaldehyde which had been placed in the root canals of the canines of cats following pulpectomies was studied using liquid scintillation counting and wholebody autoradiographic technique. Radioactive 14C which had been placed in the canals was found in the plasma 30 min after the root canal procedure. The recovery of systemic 14C radioactivity increased with time. In addition, it seemed that approximately 3% of the dose placed in the teeth was excreted in the urine within 36 h. Whole-body autoradiograms indicated extensive concentration of 14C radioactivity in tissues other than those analyzed with the liquid scintillation technique.

Autotransplantation Using Endosseous Implants as Stabilizers

The surgical transfer of a tooth from one site to another in the same individual is known as autotransplantation. Usually the tooth transferred is an unerupted or partially erupted third molar which is placed into a first molar position with some external fixation. In this case report, the first molar was already missing and the second molar was hopeless. An erupted third molar was autotransplanted into the second molar site and endosseous implants were used to stabilize the tooth. A fixed bridge was placed 6 months later and the progress followed for 4 yr.