Giorgio Adamo

Plasmon Spectroscopy and Imaging of Individual Gold Nanodecahedra: A Combined Optical Microscopy, Cathodoluminescence, and Electron Energy-Loss Spectroscopy Study

Imaging localized plasmon modes in noble-metal nanoparticles is of fundamental importance for applications such as ultrasensitive molecular detection. Here, we demonstrate the combined use of optical dark-field microscopy (DFM), cathodoluminescence (CL), and electron energy-loss spectroscopy (EELS) to study localized surface plasmons on individual gold nanodecahedra. By exciting surface plasmons with either external light or an electron beam, we experimentally resolve a prominent dipole-active plasmon band in the far-field radiation acquired via DFM and CL, whereas EELS reveals an additional plasmon mode associated with a weak dipole moment. We present measured spectra and intensity maps of plasmon modes in individual nanodecahedra in excellent agreement with boundary-element method simulations, including the effect of the substrate. A simple tight-binding model is formulated to successfully explain the rich plasmon structure in these particles encompasing bright and dark modes, which we predict to be fully observable in less lossy silver decahedra. Our work provides useful insight into the complex nature of plasmon resonances in nanoparticles with pentagonal symmetry.

GaAs/AlGaAs Nanowire Photodetector

We demonstrate an efficient core-shell GaAs/AlGaAs nanowire photodetector operating at room temperature. The design of this nanoscale detector is based on a type-I heterostructure combined with a metal-semiconductor-metal (MSM) radial architecture, in which built-in electric fields at the semiconductor heterointerface and at the metal/semiconductor Schottky contact promote photogenerated charge separation, enhancing photosensitivity. The spectral photoconductive response shows that the nanowire supports resonant optical modes in the near-infrared region, which lead to large photocurrent density in agreement with the predictions of electromagnetic and transport computational models. The single nanowire photodetector shows a remarkable peak photoresponsivity of 0.57 A/W, comparable to large-area planar GaAs photodetectors on the market, and a high detectivity of 7.2 × 10(10) cm·Hz(1/2)/W at λ = 855 nm. This is promising for the design of a new generation of highly sensitive single nanowire photodetectors by controlling the optical mode confinement, bandgap, density of states, and electrode engineering.

Ultraviolet and visible range plasmonics in the topological insulator Bi1.5Sb0.5Te1.8Se1.2.

The development of metamaterials, data processing circuits and sensors for the visible and ultraviolet parts of the spectrum is hampered by the lack of low-loss media supporting plasmonic excitations. This has driven the intense search for plasmonic materials beyond noble metals. Here we show that the semiconductor Bi1.5Sb0.5Te1.8Se1.2, also known as a topological insulator, is also a good plasmonic material in the blue-ultraviolet range, in addition to the already-investigated terahertz frequency range. Metamaterials fabricated from Bi1.5Sb0.5Te1.8Se1.2 show plasmonic resonances from 350 to 550 nm, while surface gratings exhibit cathodoluminescent peaks from 230 to 1,050 nm. The observed plasmonic response is attributed to the combination of bulk charge carriers from interband transitions and surface charge carriers of the topological insulator. The importance of our result is in the identification of new mechanisms of negative permittivity in semiconductors where visible range plasmonics can be directly integrated with electronics.

Transmitting hertzian optical nanoantenna with free-electron feed.

A pair of coupled gold nanorods excited by a beam of free electrons acts as a transmitting Hertzian antenna in the optical part of the spectrum. Significantly enhanced resonant emission is observed from the antenna when the electron beam is injected around the junction between the rods, where the local density of electromagnetic states is elevated.

Cathodo- and photoluminescence in Yb3+-Er3+ co-doped PbF2 nanoparticles

We have prepared and studied the PbF(2):(Yb(3+),Er(3+)) co-doped nanoparticles, with chemical formula (Yb-Er)(x)Pb(1-x)F(2+x), where x = 0.29, Yb(3+)/Er(3+) = 6, and estimated the energy efficiency for their cathodoluminescence, mostly of Yb(3+), and up-conversion photoluminescence of Er(3+) to reach more than 0.5% and 20%, respectively, which may be the highest to date for rare-earth doped nanoparticles. Electron beam induced temperature rise in the nanoparticles has been estimated by measuring the ratio of green emission bands of Er(3+). These high efficiencies are due to high doping level of nanoparticles and due to low phonon energy of the PbF(2) host.

Tuning the influence of metal nanoparticles on ZnO photoluminescence by atomic-layer-deposited dielectric spacer

Abstract There is increasing interest in tuning the optical and optoelectronic properties of semiconductor nanostructures using metal nanoparticles in their applications in light-emitting and detection devices. In this work we study the effect of a dielectric Al2O3 gap layer (i.e., spacer) on the interaction of ZnO nanowires with metal nanoparticles. The Al2O3 spacer thickness is varied in the range of 1–25 nm using atomic layer deposition (ALD) in order to tune the interaction. It is found that ~5 nm is an optimum spacer thickness common for most metals, although the enhancement ratio of the near-bandedge emission differs among the metals. Consistent results are obtained from both photoluminescence (PL) and cathodoluminescence (CL) spectroscopies, with the latter being applied to the optical properties of individual semiconductor/metal nanoheterostructures. The interaction is primarily proposed to be related to coupling of ZnO excitons with local surface plasmons of metals, although other mechanisms should not be ruled out.

Tuneable electron-beam-driven nanoscale light source

Recently demonstrated ‘light-wells’—free-electron-driven tuneable nanoscale light sources—generate optical photons as electrons travel down a nano-hole through a metal‐dielectric multilayer structure. We report here on the application of boundary element modeling methods to the simulation of light-well output characteristics. The model is found to successfully reproduce the key features observed in experiment and as such will aid in the development and optimization of future device structures.

Atomic Response in the Near-Field of Nanostructured Plasmonic Metamaterial

We report on reflection spectra of cesium atoms in close vicinity of a nanostructured metallic meta-surface. We show that the hyperfine sub-Doppler spectrum of the 6(2)S1/2-6(2)P3/2 resonance transition at 852 nm is strongly affected by the coupling to the plasmonic resonance of the nanostructure. Fine tuning of dispersion and positions of the atomic lines in the near-field of plasmonic metamaterials could have uses and implications for atom-based metrology, sensing, and the development of atom-on-a-chip devices.

Organometallic perovskite metasurfaces

Organometallic perovskites, solution-processable materials with outstanding optoelectronic properties and high index of refraction, provide a platform for all-dielectric metamaterials operating at visible frequencies. Perovskite metasurfaces with structural coloring tunable across visible frequencies are realized through subwavelength structuring. Moreover, a threefold increase of the luminescence yield and comparable reduction of luminescence decay time are observed.

Enhancing circular dichroism by super chiral hot spots from a chiral metasurface with apexes

Manipulating light spin (or circular polarization) is an important research field and may find broad applications from sensors, display technology, to quantum computing and communication. To this end, planar metasurfaces with larger circular dichroism are strongly demanded. However, current planar chiral metasurface structures suffer from either fabrication challenge, especially from near-infrared to visible spectrum, or insufficient circular dichroism. Here, we report a chiral metasurface composed of achiral nanoholes which allow for precisely creating apexes in the designed structure. Our investigation indicates that the apexes act as super chiral hot spots and enable the highly concentrated near-field optical chirality leading to a remarkable enhancement of circular dichroism in the far-field. A 4-fold enhancement of the circular dichroism and a strong optical activity of ∼15 degrees have been experimentally achieved. Besides the enhanced chirality, our design genuinely overcomes the nanofabrication ch...