Giovanni Di Santo

Room temperature metalation of 2H-TPP monolayer on iron and nickel surfaces by picking up substrate metal atoms.

Here, it is demonstrated, using high-resolution X-ray spectroscopy and density functional theory calculations, that 2H-tetraphenyl porphyrins metalate at room temperature by incorporating a surface metal atom when a (sub)monolayer is deposited on 3d magnetic substrates, such as Fe(110) and Ni(111). The calculations demonstrate that the redox metalation reaction would be exothermic when occurring on a Ni(111) substrate with an energy gain of 0.89 eV upon embedding a Ni adatom in the macrocycle. This is a novel way to form, via chemical modification and supramolecular engineering, 3d-metal-organic networks on magnetic substrates with an intimate bond between the macrocycle molecular metal ion and the substrate atoms. The achievement of a complete metalation by Fe and Ni can be regarded as a test case for successful preparation of spintronic devices by means of molecular-based magnets and inorganic magnetic substrates.

Supramolecular Engineering through Temperature-Induced Chemical Modification of 2H-Tetraphenylporphyrin on Ag(111): Flat Phenyl Conformation and Possible Dehydrogenation Reactions

Scratching the surface: Formation of a monolayer of 2H-tetraphenylporphyrins (2H-TPP) on Ag(111), either by sublimation of a multilayer in the range 525-600 K or by annealing (at the same temperature) a monolayer deposited at room temperature, induces a chemical modification of the molecules. Rotation of the phenyl rings into a flat conformation is observed and tentatively explained, by using DFT calculations, as a peculiar reaction due to molecular dehydrogenation.

Changes of the Molecule–Substrate Interaction upon Metal Inclusion into a Porphyrin

Metal-dependent conformations: a change in the adaptation of tetraphenylporphyrins (TPPs) on Ag(111) was observed in the presence of a metal ion in the macrocycle. Upon annealing at T>575 K, 2H-TPP molecules increase the overlap of the phenyl π orbitals with the substrate, thus reducing the distance. The presence of Co creates a strong bond between Co dz(2) and the Ag sp states, leaving the porphyrin macrocycle at a larger distance to the surface.

Spin–Orbit Coupling Induced Gap in Graphene on Pt(111) with Intercalated Pb Monolayer

Graphene is one of the most promising materials for nanoelectronics owing to its unique Dirac cone-like dispersion of the electronic state and high mobility of the charge carriers. However, to facilitate the implementation of the graphene-based devices, an essential change of its electronic structure, a creation of the band gap should controllably be done. Brought about by two fundamentally different mechanisms, a sublattice symmetry breaking or an induced strong spin-orbit interaction, the band gap appearance can drive graphene into a narrow-gap semiconductor or a 2D topological insulator phase, respectively, with both cases being technologically relevant. The later case, characterized by a spin-orbit gap between the valence and conduction bands, can give rise to the spin-polarized topologically protected edge states. Here, we study the effect of the spin-orbit interaction enhancement in graphene placed in contact with a lead monolayer. By means of angle-resolved photoemission spectroscopy, we show that intercalation of the Pb interlayer between the graphene sheet and the Pt(111) surface leads to formation of a gap of ∼200 meV at the Dirac point of graphene. Spin-resolved measurements confirm the splitting to be of a spin-orbit nature, and the measured near-gap spin structure resembles that of the quantum spin Hall state in graphene, proposed by Kane and Mele [ Phys. Rev. Lett. 2005 , 95 , 226801 ]. With a bandstructure tuned in this way, graphene acquires a functionality going beyond its intrinsic properties and becomes more attractive for possible spintronic applications.

Manipulating the Topological Interface by Molecular Adsorbates: Adsorption of Co-Phthalocyanine on Bi2Se3.

Topological insulators are a promising class of materials for applications in the field of spintronics. New perspectives in this field can arise from interfacing metal-organic molecules with the topological insulator spin-momentum locked surface states, which can be perturbed enhancing or suppressing spintronics-relevant properties such as spin coherence. Here we show results from an angle-resolved photemission spectroscopy (ARPES) and scanning tunnelling microscopy (STM) study of the prototypical cobalt phthalocyanine (CoPc)/Bi2Se3 interface. We demonstrate that that the hybrid interface can act on the topological protection of the surface and bury the Dirac cone below the first quintuple layer.

Adsorption geometry, conformation, and electronic structure of 2H-octaethylporphyrin on Ag(111) and Fe metalation in ultra high vacuum

Due to the growing interest in the ferromagnetic properties of Fe-octaethylporphyrins (Fe-OEP) for applications in spintronics, methods to produce stable Fe-porphyrins with no Cl atoms are highly demanded. Here, we demonstrate the formation of Fe-OEP layers on Ag(111) single crystal by the ultra high vacuum in situ metalation of the free-base 2H-2,3,7,8,12,13,17,18-octaethylporphyrin (2H-OEP) molecules. The metalation proceeds exactly as in the case of 2H-5,10,15,20-tetraphenylporphyrin (2H-TPP) on the same substrate. An extensive surface characterization by means of X-ray photoemission spectroscopy, valence band photoemission, and NEXAFS with synchrotron radiation light provides information on molecular conformation and electronic structure in the monolayer and multilayer cases. We demonstrate that the presence of the ethyl groups affects the tilt of the adsorbed molecules, the conformation of the macrocycle, and the polarization screening in multilayers, but has only a minor effect in the metalation process with respect to 2H-TPP.

Substrate Influence for the Zn‐tetraphenyl‐porphyrin Adsorption Geometry and the Interface‐Induced Electron Transfer

In molecular devices, the importance of interfaces cannot be neglected as they determine charge injection and charge flow and, therefore, the device performance. Herein we report on the interaction of one single layer of Zn-tetraphenyl-porphyrin with Ag(110) and Si(111). Photoemission, near-edge X-ray absorption, and resonant photoemission are used to study the bonding nature, the adsorption geometry as well as the dynamics of electron transfer between the molecules and the metal or semiconductor surfaces. Molecule-substrate charge transfer is driven by the overlap with the molecular pi orbitals. In particular, the coupling of the phenyl legs with the substrate and the relative excited charge injection are dramatically different for the two surfaces considered.

Water Formation for the Metalation of Porphyrin Molecules on Oxidized Cu(111)

Herein the formation of water molecules in the intermediate step of the redox reaction of porphyrins self-metalation on O/Cu(111) is demonstrated. Photoemission measurements show that the temperature on which porphyrins pick-up a substrate metal atom on O/Cu(111) is reduced by about 185±15 K with respect to the pure Cu(111). DFT calculations clearly indicate that the formation of a water molecule is less expensive than the formation of H2 on the O/Cu(111) substrate and, in some cases, it can be also exothermic.

Multi-orbital charge transfer at highly oriented organic/metal interfaces

The molecule–substrate interaction plays a key role in charge injection organic-based devices. Charge transfer at molecule–metal interfaces strongly affects the overall physical and magnetic properties of the system, and ultimately the device performance. Here, we report theoretical and experimental evidence of a pronounced charge transfer involving nickel tetraphenyl porphyrin molecules adsorbed on Cu(100). The exceptional charge transfer leads to filling of the higher unoccupied orbitals up to LUMO+3. As a consequence of this strong interaction with the substrate, the porphyrin’s macrocycle sits very close to the surface, forcing the phenyl ligands to bend upwards. Due to this adsorption configuration, scanning tunneling microscopy cannot reliably probe the states related to the macrocycle. We demonstrate that photoemission tomography can instead access the Ni-TPP macrocycle electronic states and determine the reordering and filling of the LUMOs upon adsorption, thereby confirming the remarkable charge transfer predicted by density functional theory calculations.Charge transfer at molecule-metal interfaces affects the overall physical and magnetic properties of organic-based devices, and ultimately their performance. Here, the authors report evidence of a pronounced charge transfer involving nickel tetraphenyl porphyrin molecules adsorbed on copper.

Spectroscopic observation of oxygen dissociation on nitrogen-doped graphene

Carbon nanomaterials’ reactivity towards oxygen is very poor, limiting their potential applications. However, nitrogen doping is an established way to introduce active sites that facilitate interaction with gases. This boosts the materials’ reactivity for bio-/gas sensing and enhances their catalytic performance for the oxygen reduction reaction. Despite this interest, the role of differently bonded nitrogen dopants in the interaction with oxygen is obscured by experimental challenges and has so far resisted clear conclusions. We study the interaction of molecular oxygen with graphene doped via nitrogen plasma by in situ high-resolution synchrotron techniques, supported by density functional theory core level simulations. The interaction leads to oxygen dissociation and the formation of carbon-oxygen single bonds on graphene, along with a band gap opening and a rounding of the Dirac cone. The change of the N 1 s core level signal indicates that graphitic nitrogen is involved in the observed mechanism: the adsorbed oxygen molecule is dissociated and the two O atoms chemisorb with epoxy bonds to the nearest carbon neighbours of the graphitic nitrogen. Our findings help resolve existing controversies and offer compelling new evidence of the ORR pathway.