Giulia Ghiacci

The response of osteoblastic MC3T3-E1 cells to micro- and nano-textured, hydrophilic and bioactive titanium surfaces

The aim of the present work was to investigate the morphology and activity of the murine osteoblastic cell line MC3T3 on control smooth (Machined), commercially available rough (ZT) titanium discs, and on titanium samples obtained by modifying the ZT treatment protocol, and herein labelled as ZTF, ZTM and ZTFM. Cells were evaluated at SEM and immunofluorescence for morphology and cell-to-cell interactions and by MTT assay and real time PCR for cell growth and function. Microscopy showed that ZT modified protocols could differently affect cell shape and distribution. All the tested surfaces showed good biocompatibility by viability assay. However, cells on smoother surfaces appeared to express higher levels of transcript for Collagen 1a1, the main component of extracellular matrix, by real time PCR. Expression of the early differentiation marker Alkaline Phosphatase was higher on ZTF surfaces and ZTM enhanced the expression of later osteoblastic markers Osteoprotegerin and Osteocalcin. Noteworthy, the expression of Connexin 43, a component of cell-to-cell contacts and hemichannels, followed a similar pattern to differentiation marker genes and was higher in cells on ZTM surfaces, consistently with the microscopic observation of cell clusters. Taken together, this data showed that ZTF and ZTM treatment protocols appeared to improve the basal sand-blasting/acid-etching ZT procedure with ZTM surfaces promoting the most mature stage of differentiation.

The Effect of Age, Gender, and Insertion Site on Marginal Bone Loss around Endosseous Implants: Results from a 3-Year Trial with Premium Implant System

Objectives. The goal of this study was to evaluate bone changes around endosseous implants in partially edentulous patients. Materials and Methods. A total of 632 two-stage implants were placed in 252 patients. The implants had straight emergence profile, ZirTi surface, 3.3 to 5 mm diameter, and 8.5 to 13 mm length. Bone levels were assessed on orthopantomography immediately after surgery and after 36 months and marginal bone loss (MBL) was calculated from their difference. Results. Cumulative survival rate was 98.73%. Overall MBL was 0.8 mm ± 0.03 (mean ± SEM). Higher MBL was observed around implants in the maxilla than in the mandible (P < 0.007). A relation between implant diameter and MBL (P < 0.0001) was observed in male and, more limitedly, female patients. Older patients had higher MBL in the maxilla, but not in the mandible (P < 0.0001). MBL progressively increased with age in male patients, but reached a peak already in the 50–60 years age group in the female subset (P < 0.001). Conclusions. The overall MBL is consistent with the available literature. Site difference and patient age and gender appear to significantly affect MBL, representing important factors to be considered during implant placement.

Correlation between Density and Resorption of Fresh-Frozen and Autogenous Bone Grafts

Trial Design. This analysis compared the outcome of fresh-frozen versus autologous bone block grafts for horizontal ridge augmentation in patients with Cawood and Howell class IV atrophies. Methods. Seventeen patients received autologous grafts and 21 patients received fresh-frozen bone grafts. Patients underwent CT scans 1 week and 6 months after surgery for graft volume and density analysis. Results. Two autologous and 3 fresh-frozen grafts failed. Autologous and fresh-frozen grafts lost, respectively, 28% and 46% of their initial volume (P = 0.028). It is noteworthy that less dense fresh-frozen blocks lost more volume than denser grafts (61% versus 16%). Conclusions. According to these 6-month results, only denser fresh-frozen bone graft may be an acceptable alternative to autologous bone for horizontal ridge augmentation. Further studies are needed to investigate its behaviour at longer time points.

Stanozolol-soaked grafts enhance new bone formation in rat calvarial critical-size defects.

Androgen hormones play a significant role in regulating bone morphogenesis and in maintaining bone homeostasis throughout life. This study aimed to investigate the local effects of the non-aromatizable androgen stanozolol (ST) on bone regeneration in rats. Bilateral critical-size defects were created in the parietal bone of 26 male Wistar rats: the defect on one side was filled with a deproteinized bovine bone scaffold (DBB) soaked in ST solution (test) and the contralateral with DBB alone (control). Samples were collected at one month and three months. Histomorphometry revealed a significantly higher new bone formation (NB) (24.41% ± 4.14% versus 15.01% ± 2.43%, p < 0.05) and mineral apposition rate (MAR) (9.20 μm/day ± 0.37 versus 6.50 μm/day ± 1.09, p < 0.05) in the test versus control group at one month. Accordingly, real time-polymerase chain reaction revealed a consistently higher Runx2 expression in test samples (fold change test/control: 4.50 ± 1.17, p ≤ 0.05). No morphometrical differences between groups were detected at three months (p > 0.05). However, test samples were characterized by an increase in blood capillary density from one month (11.43 n mm-2 ± 2.01) to three months (28.26 n mm-2 ± 5.62), providing evidence of a vital remodeling tissue. Control samples presented a decrease of anti-Osterix (SP7)/anti-osteocalcin (BGLAP) (3.9 n mm-2 ± 0.32 versus 1.01 n mm-2 ± 0.20) and alkaline phosphatase (ALP) (12.14 n mm-2 ± 6.29 versus 6.29 n mm-2 ± 2.73) immunohistochemical-positive elements, which was suggestive of a stabilized healing phase. Based on these observations, local ST administration boosted bone regeneration in rat calvarial critical-size defects at one month. This study showed the potential of local steroid delivery in bone regeneration.

Role of prostaglandin E2 in the modulation of Wnt canonical signaling in cells on microstructured titanium surfaces

Background Rough surface topography enhances the activation of Wnt canonical signaling, a pathway required for osteoblast differentiation. The present study investigated the effects of the modulation of prostaglandin E2 (PGE2) signaling on osteoblastic differentiation on titanium surfaces for endosseous implants with different topographies. Methods C2C12 cells were plated on polished or acid-etched/sand-blasted (SLA) titanium discs and stimulated with 1 μM PGE2 or 100 nM cyclooxygenase inhibitor indomethacin. Activation of Wnt canonical signaling was measured with a reporter system. Gene expression was measured in the same cell system by real-time polymerase chain reaction (RT-PCR). Osteoblastic MC3T3 cells were then plated on polished or SLA titanium discs with or without indomethacin, and their proliferation and the expression of osteoblast-specific genes was assessed by RT-PCR. Cell morphology was furthermore studied on SEM, and cell adhesion was assessed by fluorescent labeling of focal adhesion. Results PGE2 decreased Wnt signaling stimulation in cells growing on polished or SLA surfaces, while indomethacin increased the expression of Wnt target genes in C2C12 and MC3T3 cells, by reporter assay. Moreover, indomethacin increased the expression of early differentiation marker alkaline phosphatase in MC3T3 cells on polished discs and of late marker osteocalcin in cells on SLA titanium. Conclusions Prostaglandin signaling affects the activation of Wnt canonical pathway in osteoblastic and mesenchymal cells on microstructured surfaces.

Tailoring the Interface of Biomaterials to Design Effective Scaffolds

Tissue engineering (TE) is a multidisciplinary science, which including principles from material science, biology and medicine aims to develop biological substitutes to restore damaged tissues and organs. A major challenge in TE is the choice of suitable biomaterial to fabricate a scaffold that mimics native extracellular matrix guiding resident stem cells to regenerate the functional tissue. Ideally, the biomaterial should be tailored in order that the final scaffold would be (i) biodegradable to be gradually replaced by regenerating new tissue, (ii) mechanically similar to the tissue to regenerate, (iii) porous to allow cell growth as nutrient, oxygen and waste transport and (iv) bioactive to promote cell adhesion and differentiation. With this perspective, this review discusses the options and challenges facing biomaterial selection when a scaffold has to be designed. We highlight the possibilities in the final mold the materials should assume and the most effective techniques for its fabrication depending on the target tissue, including the alternatives to ameliorate its bioactivity. Furthermore, particular attention has been given to the influence that all these aspects have on resident cells considering the frontiers of materiobiology. In addition, a focus on chitosan as a versatile biomaterial for TE scaffold fabrication has been done, highlighting its latest advances in the literature on bone, skin, cartilage and cornea TE.

“Over-inlay” block graft and differential morphometry: a novel block graft model to study bone regeneration and host-to-graft interfaces in rats

Purpose The aim of this study was to present new a model that allows the study of the bone healing process, with an emphasis on the biological behavior of different graft-to-host interfaces. A standardized “over-inlay” surgical technique combined with a differential histomorphometric analysis is presented in order to optimize the use of critical-size calvarial defects in pre-clinical testing. Methods Critical-size defects were created into the parietal bone of 8 male Wistar rats. Deproteinized bovine bone (DBBM) blocks were inserted into the defects, so that part of the block was included within the calvarial thickness and part exceeded the calvarial height (an “over-inlay” graft). All animals were sacrificed at 1 or 3 months. Histomorphometric and immunohistochemical evaluation was carried out within distinct regions of interest (ROIs): the areas adjacent to the native bone (BA), the periosteal area (PA) and the central area (CA). Results The animals healed without complications. Differential morphometry allowed the examination of the tissue composition within distinct regions: the BA presented consistent amounts of new bone formation (NB), which increased over time (24.53%±1.26% at 1 month; 37.73%±0.39% at 3 months), thus suggesting that this area makes a substantial contribution toward NB. The PA was mainly composed of fibrous tissue (71.16%±8.06% and 78.30%±2.67%, respectively), while the CA showed high amounts of DBBM at both time points (78.30%±2.67% and 74.68%±1.07%, respectively), demonstrating a slow remodeling process. Blood vessels revealed a progressive migration from the interface with native bone toward the central area of the graft. Osterix-positive cells observed at 1 month within the PA suggested that the periosteum was a source of osteoprogenitor elements. Alkaline phosphatase data on matrix deposition confirmed this observation. Conclusions The present model allowed for a standardized investigation of distinct graft-to-host interfaces both at vertically augmented and inlay-augmented sites, thus possibly limiting the number of animals required for pre-clinical investigations.

Tardive Dyskinesia, Oral Parafunction, and Implant-Supported Rehabilitation

Oral movement disorders may lead to prosthesis and implant failure due to excessive loading. We report on an edentulous patient suffering from drug-induced tardive dyskinesia (TD) and oral parafunction (OP) rehabilitated with implant-supported screw-retained prostheses. The frequency and intensity of the movements were high, and no pharmacological intervention was possible. Moreover, the patient refused night-time splint therapy. A series of implant and prosthetic failures were experienced. Implant failures were all in the maxilla and stopped when a rigid titanium structure was placed to connect implants. Ad hoc designed studies are desirable to elucidate the mutual influence between oral movement disorders and implant-supported rehabilitation.