Giuseppe Cefarelli

Behavior of FRP Reinforced Concrete Slabs in Case of Fire: Theoretical Models and Experimental Tests

Several technical codes allow concrete structures reinforced with FRP to be designed, but few calculation models taking account of fire condition are available. Assuming that the anchoring of the reinforcement is ensured in cooler zones of the structure, a calculation procedure developed by authors allows the flexural capacity of the one-way FRP reinforced concrete slabs under fire conditions to be assessed. The procedure was used for the design in the fire situation of six concrete slabs reinforced with Glass Fiber Reinforced Polymer (GFRP) bars. Such slabs were tested in case of fire by exposing them to heat in a furnace according to ISO834 standard time-temperature curve: four slabs have been tested under typical design loads in fire situation and two unloaded slabs have been tested after the cooling phase in order to evaluate their residual resistance. The experimental results confirmed that the effects of the high temperatures on both the deterioration of the material mechanical properties and the decrease of bond between FRP reinforcement and concrete are key aspects of the structural behavior of concrete members reinforced with FRP bars. Nevertheless the anchoring length at the end of the members not directly exposed to fire could ensure a fire resistance time higher than 180 minutes.

The Influence of Fire Scenarios on the Structural Behaviour of Composite Steel-Concrete Buildings

Fire Safety Engineering can be defined as a multi-discipline based on the application of scientific and engineering principles to the effects of fire in order to reduce the loss of life and damage to property by quantifying the risks and hazards involved and provide an optimal solution to risk mitigation. The correct identification of fire scenarios is the central stage in the process of the structural fire design. A design fire scenario is the description of the spread of a particular fire with respect to time and space. In the process of identification of design fire scenarios for the structural fire safety check, all fires must be assessed realistically, choosing those most severe for the structural response. This paper is devoted to evaluate the influence of fire scenarios on the structural behaviour of composite steel-concrete buildings. In order to that, an office building subjected to different fire scenarios was considered. In particular the fire scenarios were defined by both standard fire (prescriptive approach) and natural fire (performance approach). Finally, a comparison between the prescriptive approach and the FSE approach is presented.

Fire Safety Engineering for Open and Closed Car Parks: C.A.S.E. Project for L’Aquila

The Fire Safety Engineering (FSE) is a multi-discipline aimed to define the fire safety strategy for buildings under fire conditions, in which structural stability and control of fire spread are achieved by providing active and/or passive fire protection. In this paper, the aspects of FSE for the structural safety checks in case of fire are shown with reference to Italian and European standards. FSE requires the choice of a performance level, the definition of design fire scenarios, the choice of heat flows models and several numerical thermo-mechanical analyses. The information provided by a significant research, performed in Europe for open and closed car parks, are used to apply the FSE to the car parks of the new buildings of the C.A.S.E. Project for L’Aquila, characterized by steel columns supporting the seismically isolated superstructure. The results of the application of the FSE approach are reported and discussed in the second part of the paper.

Adhesion at High Temperature of FRP Bars Straight or Bent at the end of Concrete Slabs

Confidence in the use of Fiber Reinforced Polymer (FRP) for Reinforced Concrete (RC) members in multi-story buildings, parking garages, and industrial structures is poor due to lack of provisions and calculation models taking account of fire condition. In the past, to contribute to refining existing codes for the design of FRP-RC structures, authors tested six concrete slabs reinforced with Glass FRP (GFRP) bars characterized by different values of concrete cover and anchoring length in fire condition. Recently, further three fire tests were carried out on concrete slabs reinforced with GFRP bars bent at the ends. The anchoring of the FRP bars in the zone of slab not directly exposed to fire at the end of the members revealed essential to ensures slab resistance, once in the fire exposed zone of slab the glass transition temperature was attained and the resin softening reduced the adhesion at the FRP-concrete interface.

Calibration of a simplified method for fire resistance assessment of partially encased composite beams

Purpose This paper aims to deal with the evaluation of the bending moment resistance of partially encased composite beams, heated from below by the standard-time temperature curve (ISO 834). Design/methodology/approach EN 1994-1-2 provides two calculation models for evaluating the sagging and hogging moment resistance: the “general simplified rules” and the “simplified models” proposed in the Annex F. Findings In this paper, these simplified calculation models were implemented on several partially encased composite beams, by means of a parametric analysis. Then, the results were compared to those obtained through an advanced calculation model, such as the Moment–Curvature model, by means of a comparative analysis. Originality/value The aim of the “parametric-comparative” analysis is the evaluation of the reliability of the Annex F simplified models. This analysis was conducted by means of both numerical-numerical and numerical-experimental comparisons. This paper provides an alternative simplified calculation model, which is easy to implement and very reliable.

Bond Models for FRP Bars Anchorage in Concrete Slabs under Fire

Experimental tests were recently performed to evaluate resistance and deformability of nine concrete slabs reinforced with Fiber Reinforced Polymer (FRP) bars in fire situation by varying (a) external loads in the range of the service loads, (b) concrete cover in the range of usual values (30-50mm), (c) bar end shape (straight or bent) and its length at the end of the concrete members, namely in the zone not directly exposed to fire (250-500mm). Experimental results showed the importance of concrete cover in the zone directly exposed to fire for the protection provided to FRP bars, due to its low thermal conductivity. Moreover, the length of the FRP bars in the zone of slab not directly exposed to fire and its shape at the end of the members was crucial to ensures slab resistance once the resin softening reduced the adhesion at the FRP-concrete interface in the fire exposed zone of slab. In particular the anchorage obtained simply by bending bars at the end of member in a short zone (250mm) allowed attaining a good structural behavior in case of fire equivalent to that showed by slabs characterized by a large anchoring length (500mm). Tests results are briefly compared and discussed in this paper, whereas the behavior of the bar anchorage is carefully examined based on both the results of numerical thermal analysis and the predictions of a bond theoretical model adjusted for fire situation.