Giuseppe D'Avenio

Innovative technologies for the assessment of cardiovascular medical devices: state-of-the-art techniques for artificial heart valve testing

Prosthetic heart valves (PHVs) are engineered devices used for replacing diseased natural cardiac valves. This article presents several investigational techniques for the evaluation of the performance of these clinical devices, whose implantation is not completely free of drawbacks. The state-of-the-art in the technological approach for PHV testing is addressed. As the fluid dynamics of PHVs are particularly complex, the main focus will be on experimental velocimetric techniques and computational analysis. A methodology for the analysis of the valve’s signature, in terms of its characteristic sound in the opening and closing phases, is also presented. The aforementioned techniques are necessary to guarantee an operational life of the implanted device as free as possible from clinical complications. It can be realistically expected that this characterization will help designers in improving PHV performance.

Virtual microscopy and digital cytology: state of the art

The paper approaches a new technological scenario relevant for the introduction of the digital cytology (D-CYT) in the health service. A detailed analysis of the state of the art on the status of the introduction of D-CYT in the hospital and more in general in the dispersed territory has been conducted. The analysis was conducted in a form of review and was arranged into two parts: the first part focused on the technological tools needed to carry out a successful service (client server architectures, e-learning, quality assurance issues); the second part focused on issues oriented to help the introduction and evaluation of the technology (specific training in D-CYT, health technology assessment in-routine application, data format standards and picture archiving computerized systems (PACS) implementation, image quality assessment, strategies of navigation, 3D-virtual-reality potentialities). The work enlightens future scenarios of actions relevant for the introduction of the technology.

Flow on the symmetry plane of a total cavo-pulmonary connection

The flow inside a total cavo-pulmonary connection, a bypass operation of the right heart adopted in the presence of congenital malformation, is here studied for a specific geometry which has been recently introduced in clinics. The analysis has been performed by preliminary experimental observation and a novel Navier-Stokes formulation on the symmetry plane. This method, once some basic hypotheses are verified, allows to reproduce the flow on the symmetry plane of a three-dimensional field by using an extension of the two-dimensional approach. The analysis has confirmed the existence of a central vortex showing that it is not a real vortex (i.e. a place with accumulation of vorticity) but, rather, a weakly dissipative recirculating zone. It is surrounded by a shear layer that becomes spontaneously unsteady at moderately high Reynolds number. The topological changes and energy dissipation have been analysed in both cases of unbalanced and of balanced pulmonary artery and caval flows.

19 MM SIZED BILEAFLET VALVE PROSTHESES' FLOW FIELD INVESTIGATED BY BIDIMENSIONAL LASER DOPPLER ANEMOMETRY (PART I : VELOCITY PROFILES)

The investigation of the flow field downstream of a cardiac valve prosthesis is a well established task. In particular turbulence generation is of interest if damage to blood costituents is to be assessed. Several prosthetic valve flow studies are available in literature but they generally concern large-sized prostheses. The FDA draft guidance requires the study of the maximum Reynolds number conditions for a cardiac valve model to assess the worst case in turbulence by chosing both the minimum valve diameter and a high cardiac output value as protocol set up. Within the framework of a national research project regarding the characterization of cardiovascular endoprostheses, the Laboratory of Biomedical Engineering is currently conducting an in-depth study of turbulence generated downstream of bileaflet cardiac valves. Four models of 19 mm sized bileaflet valve prostheses, namely St Jude Medical HP, Edwards Tekna, Sorin Bicarbon, and CarboMedics, were studied in aortic position. The prostheses were selected for the nominal annulus diameter reported by the manufacturers without any assessment of the valve sizing method. The hemodynamic function was investigated using a bidimensional LDA system. Results concern velocity profiles during the peak flow systolic phase, at high cardiac output regime, highlighting the different flow field features downstream of the four small-sized cardiac valves.

On the monodimensional approach to the estimation of the highest reynolds shear stress in a turbulent flow.

The measurement of the Reynolds stress tensor, or at least of some of its components, is a necessary step to assess if the turbulence associated with the flow near prosthetic devices can damage blood constituents. Because of the intrinsic three dimensionality of turbulence, in general, a three-component anemometer should be used to measure directly the components of the Reynolds stress tensor. However, this can be practically unfeasible, especially in vivo; therefore, it is interesting to investigate the possibility of characterizing the turbulent flows that may occur in the circulatory system with the monodimensional data that a less complete equipment (e.g., a pulsed ultrasound Doppler) can yield. From the general expression of the Reynolds stress tensor, the highest shear stress can be deduced, as well as the Reynolds normal stress in the main flow direction. The relation between these two quantities, which is an issue already addressed in previous works, can thus be rigorously formulated in terms of some characteristic parameters of the Reynolds stress tensor, the principal normal stresses and the angles that the directions that define them form with the main flow direction. An experimental verification of the ratio of the two above-mentioned quantitites for the flow across bileaflet valves, investigated by means of two-dimensional laser Doppler anemometry, will illustrate the limitations of the monodimensional approach estimating the maximum load on blood constituents.

Laser Doppler Anemometry Study of Bidimensional Flows Downstream of Three 19 mm Bileaflet Valves in the Mitral Position, Under Kinematic Similarity

Three small-size (nominal size: 19 mm) bileaflet valves, CarboMedics R (CM), St Jude Standard (SJ) and Sorin Bicarbon (SB), have been tested by means of a two-component laser Doppler anemometry (LDA) system, in the mitral position, in order to assess the potential damage to blood elements entailed by the turbulent flow through them. A high regime (6 l/min cardiac output) was chosen to perform measurements for the worst case in generated turbulence. Two half-diameter profiles, at 13 and 26 mm downstream of the valve plane, have been investigated for each model. Besides velocity profiles, turbulence shear stresses (TSS) are reported, after the application of the stress analysis technique, in order to assess the maximum values of TSS (TSSmax exerted on blood particles. Results show the typical bileaflet-type velocity profile for SB and SJ, with three jets exiting the valve, whereas CM lacks the central jet, due to instabilities of its flow field. As for TSSmax, CM reaches the highest values, presumably due to leaflets fluttering. SJs TSSmax profiles maintain similar shapes at the two downstream locations, whereas SB presents an unexpected increase in the peak value of TSSmax from 13 to 26 mm downstream of the valve plane, probably due to the curved leaflet design. The three prosthetic heart valves (PHVs) tested show many differences as for their turbulence properties, although they are similarly constructed.

19 mm sized bileaflet valve prostheses' flow field investigated by bidimensional laser Doppler anemometry (part II: maximum turbulent shear stresses)

The investigation of the flow field generated by cardiac valve prostheses is a necessary task to gain knowledge on the possible relationship between turbulence-derived stresses and the hemolytic and thrombogenic complications in patients after valve replacement. The study of turbulence flows downstream of cardiac prostheses, in literature, especially concerns large-sized prostheses with a variable flow regime from very low up to 6 L/min. The Food and Drug Administration draft guidance requires the study of the minimum prosthetic size at a high cardiac output to reach the maximum Reynolds number conditions. Within the framework of a national research project regarding the characterization of cardiovascular endoprostheses, an in-depth study of turbulence generated downstream of bileaflet cardiac valves is currently under way at the Laboratory of Biomedical Engineering of the Istituto Superiore di Sanità. Four models of 19 mm bileaflet valve prostheses were used: St Jude Medical HP, Edwards Tekna, Sorin Bicarbon, and CarboMedics. The prostheses were selected for the nominal Tissue Annulus Diameter as reported by manufacturers without any assessment of valve sizing method, and were mounted in aortic position. The aortic geometry was scaled for 19 mm prostheses using angiographic data. The turbulence-derived shear stresses were investigated very close to the valve (0.35 D0), using a bidimensional Laser Doppler anemometry system and applying the Principal Stress Analysis. Results concern typical turbulence quantities during a 50 ms window at peak flow in the systolic phase. Conclusions are drawn regarding the turbulence associated to valve design features, as well as the possible damage to blood constituents.

SWIFT (sequence-wide investigation with Fourier transform): a software tool for identifying proteins of a given class from the unannotated genome sequence

BACKGROUND The ever increasing number of sequenced genomes calls for new analysis techniques, which can benefit from the methodologies developed in the field of signal processing. METHODS The present paper addresses the question of searching a pattern of amino acids (not necessarily completely specified) by means of the cross-correlation of complex sequences, obtained after suitable coding of the original amino acid sequence. Subsequently, the proposed algorithm provides a flexible strategy in setting the border between the accepted and rejected ORFs, by means of the k-means clustering of the candidate ORFs. The search for the class of proteins specified by the pattern is carried out from the most basic level, i.e. the DNA sequence, without sifting through an ensemble of previously determined ORFs. Thus, an exhaustive examination of all the occurrences of the pattern in the genome is performed. RESULTS The application of the method to the search of surface proteins in Gram-positive bacteria witnesses its efficacy, in terms of both sensitivity and specificity. The comparison with the usual (and somewhat arbitrary) choice of setting a fixed value for the threshold length of the putative ORF confirms the validity of the proposed approach.

Improved management of systemic venous anomalies in a single ventricle: New rationale

OBJECTIVES Two innovative surgical approaches addressing systemic venous anomalies in single-ventricle patients are evaluated. METHODS Between 2003 and 2007, 7 patients underwent a unifocal bilateral bidirectional cavopulmonary anastomosis, and 5 patients underwent a hepatoazygos venous connection associated with a previous (n = 4) or concomitant (n = 1) Kawashima operation. Computational fluid dynamics simulations allowed investigation of 2 sets of comparative models: (1) bifocal versus unifocal bilateral bidirectional cavopulmonary anastomosis and (2) classic hepatic vein-pulmonary artery channel versus hepatoazygos direct anastomosis for Fontan completion after or combined with the Kawashima operation. RESULTS There was 1 hospital death in the unifocal bilateral bidirectional cavopulmonary anastomosis group. At a mean follow-up of 15.6 +/- 7.40 months after a unifocal bilateral bidirectional cavopulmonary anastomosis and of 38.7 +/- 13.2 months after direct hepatoazygos venous connection, respectively, all 11 survivors are in New York Heart Association class I with functional anastomoses. Computational assessment of bifocal bilateral bidirectional cavopulmonary anastomosis demonstrated weak perfusion between caval veins against symmetric and steady bilateral flow fields in the unifocal arrangement. In the classic post-Kawashima Fontan completion model, the hepatic venous flow to the pulmonary artery was held back by means of preponderant opposite flow, whereas in the direct hepatoazygos venous connection model, the hepatic venous flow merged smoothly into the azygos vein. Power-loss calculation showed no significant difference between bifocal and unifocal bilateral bidirectional cavopulmonary anastomosis topology, whereas the hepatoazygos connection clearly had better energy preservation than the classical connection. CONCLUSIONS This limited clinical and computational fluid dynamics assessment suggests the efficacy of this new rationale to reduce the additional thrombotic risks produced by systemic venous anomalies in single-ventricle patients.

the patterns of flow in the total extracardiac cavopulmonary connection

more than 30 years ago, fontan and baudet proposed bypass of a dysfunctional right ventricle by connecting the pulmonary arteries directly to the right atrium, the so-called atriopulmonary anastomosis. since then, much experience has been accrued in the field of the functionally univentricular circulation. the proposed connections have been subjected to several modifications, aiming towards minimizing the losses of energy in the cavopulmonary system, and thereby improving the clinical outcomes. a remarkable improvement was achieved with the introduction of the concept of the total cavopulmonary connection, specifically the combination of a bi-directional glenn anastomosis with a tubular intracardiac extension from the inferior caval venous to the pulmonary arteries. this design was shown to avoid the dissipation of energy associated with the swirling patterns seen in the traditional atrio-pulmonary anastomosis.