Giuseppina Sandri

Resveratrol-loaded solid lipid nanoparticles versus nanostructured lipid carriers: evaluation of antioxidant potential for dermal applications

Background Excessive generation of radical oxygen species (ROS) is a contributor to skin pathologies. Resveratrol (RSV) is a potent antioxidant. Solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC) can ensure close contact and increase the amount of drug absorbed into the skin. In this study, RSV was loaded into SLN and NLC for dermal applications. Methods Nanoparticles were prepared by high shear homogenization using Compritol 888ATO, Myglyol, Poloxamer188, and Tween80. Particle size (PS), polydispersity index (PI), zeta potential (ZP), drug entrapment efficiency (EE), and production yield were determined. Differential scanning calorimetry (DSC) analysis and morphological transmission electron microscopy (TEM) examination were conducted. RSV concentration was optimized with cytotoxicity studies, and net intracellular accumulation of ROS was monitored with cytofluorimetry. The amount of RSV was determined from different layers of rat abdominal skin. Results PS of uniform RSV-SLN and RSV-NLC were determined as 287.2 nm ± 5.1 and 110.5 nm ± 1.3, respectively. ZP was −15.3 mV ± 0.4 and −13.8 mV ± 0.1 in the same order. The drug EE was 18% higher in NLC systems. TEM studies showed that the drug in the shell model was relevant for SLN, and that the melting point of the lipid in NLC was slightly lower. Concentrations below 50 μM were determined as suitable RSV concentrations for both SLN and NLC in cell culture studies. RSV-NLC showed less fluorescence, indicating less ROS production in cytofluorometric studies. Ex vivo skin studies revealed that NLC are more efficient in carrying RSV to the epidermis. Conclusion This study suggests that both of the lipid nanoparticles had antioxidant properties at a concentration of 50 μM. When the two systems were compared, NLC penetrated deeper into the skin. RSV-loaded NLC with smaller PS and higher drug loading appears to be superior to SLN for dermal applications.

Buccal drug delivery: A challenge already won?

The main obstacles that drugs meet when administered via the buccal route derive from the limited absorption area and the barrier properties of the mucosa. The effective physiological removal mechanisms of the oral cavity that take the formulation away from the absorption site are the other obstacles that have to be considered. The strategies studied to overcome such obstacles include the employment of new materials that, possibly, combine mucoadhesive, enzyme inhibitory and penetration enhancer properties and the design of innovative drug delivery systems which, besides improving patient compliance, favor a more intimate contact of the drug with the absorption mucosa.:

Cyclosporine A loaded SLNs: evaluation of cellular uptake and corneal cytotoxicity.

Cyclosporine A (CsA) loaded solid lipid nanoparticles (SLNs) for topical ophthalmic applications were prepared by high shear homogenization and ultrasound method using Compritol 888 ATO, Poloxamer 188 and Tween 80, to investigate the cellular uptake of rabbit corneal epithelial cells (RCE) and to evaluate the cytotoxicity. The size of the optimized formulation was 225.9+/-5.5 nm with a polydispersity index of 0.253+/-0.05. The zeta potential and entrapment efficiency was detected as -16.9+/-0.7 mV and 95.6%, respectively. The CsA release was found to be enzyme (lipase/co-lipase complex) dependent. SLNs were sterilized at 110 and 121 degrees C. The cytotoxicity was evaluated in vitro by means of RCE cells and was higher at 121 degrees C sterilization temperature, probably due to a supposed leakage of Tween 80 following lipid re-crystallization. The permeation and penetration of CsA across/into the corneal cells were evaluated using in vitro and ex vivo experiments. The cellular uptake was investigated by replacing CsA with the fluorescent dye Rhodamine B. The penetration enhancement properties were supported by confocal laser scanning microscopy analysis. The internalization of SLNs in cornea and in RCE cell lines was confirmed, pointing out the possibility of CsA targeting to the cornea.

Buccal Delivery of Acyclovir from Films Based on Chitosan and Polyacrylic Acid

The aim of the present work was to investigate the possibility of achieving buccal delivery of a problematic drug, acyclovir, from films based on chitosan hydrochloride (HCS) and polyacrylic acid sodium salt (PAA). At first, the ionic interaction between HCS and PAA in distilled water was investigated by means of rheological and turbidimetric analysis. Films containing 1 mg/cm2 of acyclovir and based on pure HCS and on HCS and PAA mixed in different ratios were prepared by casting technique. The films were subjected to hydration, rheological, mucoadhesion, drug release, “wash away,” and permeation/penetration measurements. A commercial cream containing acyclovir and an aqueous acyclovir suspension were used as references. The addition of PAA to HCS produced a decrease in film hydration. Films based on HCS/PAA weight ratio close to interaction product stoichiometry were characterized by higher rigidity and better “wash away” properties with respect to the other films and the reference formulation. The worst mucoadhesive properties were shown by films based on mixing ratios close to interaction product stoichiometry. The addition of PAA to HCS produced a lowering in drug release profile. All the films examined promoted the permeation of acyclovir across porcine cheek epithelium when compared with acyclovir suspension and the commercial cream. The penetration enhancement properties were affected by the mixing ratio of the two polymers. The film based on 1/1.3 HCS/PAA weight ratio, besides possessing the best resilience properties on the mucosa, was also characterized by the highest permeation profile and, therefore, represents a promising formulation for buccal delivery of acyclovir.

Mucoadhesive and thermogelling systems for vaginal drug delivery.

This review focuses on two formulation approaches, mucoadhesion and thermogelling, intended for prolonging residence time on vaginal mucosa of medical devices or drug delivery systems, thus improving their efficacy. The review, after a brief description of the vaginal environment and, in particular, of the vaginal secretions that strongly affect in vivo performance of vaginal formulations, deals with the above delivery systems. As for mucoadhesive systems, conventional formulations (gels, tablets, suppositories and emulsions) and novel drug delivery systems (micro-, nano-particles) intended for vaginal administration to achieve either local or systemic effect are reviewed. As for thermogelling systems, poly(ethylene oxide-propylene oxide-ethylene oxide) copolymer-based and chitosan-based formulations are discussed as thermogelling systems. The methods employed for functional characterization of both mucoadhesive and thermogelling drug delivery systems are also briefly described.

Chitosan gels for the vaginal delivery of lactic acid: relevance of formulation parameters to mucoadhesion and release mechanisms.

The aim of this work was to assess the effect of formulation parameters of a mucoadhesive vaginal gel based on chitosan and lactic acid, and to highlight its release mechanisms. Two molecular weight chitosans were used to prepare gels with 2 lactic acid concentrations. Both chitosan molecular weight and lactic acid concentration had a significant and mutually dependent influence on mucoadhesion, measured on pig vaginal mucosa. Similarly, the lactate release profiles were found to be dependent on lactic acid content and polymer molecular weight.One gel formulation based on the stoichiometric lactate to chitosan ratio was subjected to release test in media with 2 different counterions and increasing ionic strength. This test demonstrated that the lactate release is mainly due to ionic displacement.

Cyclosporine A-Loaded Solid Lipid Nanoparticles: Ocular Tolerance and In Vivo Drug Release in Rabbit Eyes

Purpose: To determine the in vivo efficacy of cyclosporine A-loaded solid lipid nanoparticles (SLNs) in rabbit eyes. Methods: SLNs were prepared and administered to the cul-de-sac of rabbits, and the drug amount in aqueous humor was detected by high performance liquid chromatography (HPLC). The irritation was evaluated by modified Draize testing. Results: The particle size of SLNs was detected as 225.9 ± 5.5 nm with a negative surface charge. Aqueous humor drug levels reached 50.53 ng/mL, and there was no serious irritation in rabbit eyes. Conclusions: Topical ophthalmic efficacy of cyclosporine A was enhanced via administration of SLNs.

Mucoadhesive and penetration enhancement properties of three grades of hyaluronic acid using porcine buccal and vaginal tissue, Caco‐2 cell lines, and rat jejunum

The influence of the molecular weight on mucoadhesive and penetration enhancement properties of three grades of hyaluronic acid (1878, 693 and 202 kDa) has been evaluated. The mucoadhesive properties were investigated using buccal and vaginal porcine mucosa by means of a tensile stress method and using rat jejunum by means of an inclined plane method. The mucoadhesive performances observed using animal tissues were compared with the mucoadhesive properties observed using submaxillary or gastric mucin dispersions. The penetration enhancement properties were investigated using porcine buccal epithelium membrane or vaginal tissue and a cell monolayer (Caco‐2 cell line). Chitosan hydrochloride, already described as a penetration enhancer towards buccal and vaginal mucosae and Caco‐2 cell monolayers, was used as reference. Aciclovir (acyclovir), a poorly soluble and absorbable drug, commonly used in the treatment of Herpes simplex virus (type I and II), was used as the model drug. Unlike chitosan hydrochloride, which does not show any mucoadhesive potential at pH close to neutrality (buccal and intestinal), all hyaluronic acid grades show mucoadhesive properties in all the environments considered (buccal, vaginal and intestinal). In all cases, a decrease in molecular weight of hyaluronic acid produced an increase in the mucoadhesive performance. The hyaluronic acid with the lowest molecular weight (202 kD) exhibited the best penetration enhancement properties, that, depending on the substrate under consideration, was either comparable with or even better than chitosan hydrochloride. Therefore, this grade would be the most promising for buccal, vaginal and intestinal delivery of aciclovir.

Chitosan and its salts for mucosal and transmucosal delivery

This review considers the application of chitosan and its salts in the delivery of drugs intended to act locally towards diseases of the mucosa itself (mucosal delivery), and to undergo systemic absorption by means of transmucosal routes (transmucosal delivery). Those chitosan properties that are particularly useful in mucosal and transmucosal delivery have been reviewed, such as mucoadhesion, penetration enhancement and peptidase inhibition behaviour. Chitosan bioactive properties have also been considered, such as anti-infective, haemostatic, wound healing and immune-stimulating activity. Chitosan is available with a wide range of molecular mass and deacetylation degree: the influence of these properties on polymer performance and solubility has been taken into account. As solubility in particular can strongly limit the results obtained at pH values close to neutrality, particular attention has been paid to chitosan salts and derivatives with modified solubility. Thanks to the presence of positively charged amino groups of the polymer, a subject of increasing interest is the exploitation of its interaction with acidic molecules having potential synergistic behaviour towards bioactive properties, or even with acidic drugs. The aim of the review is to describe not only some properties of chitosan, but also the way they can be modified by the acidic moiety.

Thermally sensitive gels based on chitosan derivatives for the treatment of oral mucositis

The aim of the present work was the development of a thermally sensitive mucoadhesive gel based on chitosan derivatives for the treatment of oral mucositis. Trimethyl chitosan (TMC) and methylpyrrolidinone chitosan (MPC) were considered. They were mixed with glycerophosphate (GP) according to different polymer/GP molar ratios and characterized for gelation properties by means of rheological analysis in comparison with chitosan. The influence of molecular weight and substitution degree (SD) of TMC on gelation temperature and time was investigated. The mucoadhesive properties of the mixtures were also assessed using porcine buccal mucosa. The best properties were shown by TMC with high MW and low SD mixed with GP according to 1:2molar ratio. Such mixture was loaded with benzydamine hydrochloride, an anti-inflammatory drug with antimicrobial properties and subjected to in vitro drug release and wash away test. The formulation based on TMC/GP mixture was able to prolong drug release and to withstand the removal physiological mechanisms. The antimicrobial properties of both vehicle and formulation were investigated. Also in absence of drug, TMC/GP mixture was characterized by antimicrobial properties.