Göran Widmalm

Computer-assisted structural analysis of polysaccharides with an extended version of casper using 1H- and 13C-n.m.r. data☆

The computer program CASPER, used in the structural analysis of polysaccharides composed of repeating units, has been extended. The extended version uses either unassigned 1H- or 13C-n.m.r. chemical shifts or the complete unassigned C,H-correlation spectrum, and can predict the structure of linear and branched oligo- and poly-saccharides. The number of possible structures, consistent with sugar and methylation analysis, can be decreased by the use of 1JC,H and 3JH,H values. The database, which contains 1H- or 13C-n.m.r. chemical shift data for monosaccharides and 1H- or 13C-glycosylation shifts for all types of glycosidic linkages obtained by combination of the monosaccharides, has been increased and now also contains correction values for sugar residues present in branch-point regions. The program has been tested on four polysaccharides of known structure but with different degrees of complexity. For three polysaccharides, the correct structure was suggested; for the fourth, two structures were consistent with the n.m.r. data, one of them being correct.

Discrimination of epimeric glycans and glycopeptides using IM-MS and its potential for carbohydrate sequencing

Mass spectrometry is the primary analytical technique used to characterize the complex oligosaccharides that decorate cell surfaces. Monosaccharide building blocks are often simple epimers, which when combined produce diastereomeric glycoconjugates indistinguishable by mass spectrometry. Structure elucidation frequently relies on assumptions that biosynthetic pathways are highly conserved. Here, we show that biosynthetic enzymes can display unexpected promiscuity, with human glycosyltransferase pp-α-GanT2 able to utilize both uridine diphosphate N-acetylglucosamine and uridine diphosphate N-acetylgalactosamine, leading to the synthesis of epimeric glycopeptides in vitro. Ion-mobility mass spectrometry (IM-MS) was used to separate these structures and, significantly, enabled characterization of the attached glycan based on the drift times of the monosaccharide product ions generated following collision-induced dissociation. Finally, ion-mobility mass spectrometry following fragmentation was used to determine the nature of both the reducing and non-reducing glycans of a series of epimeric disaccharides and the branched pentasaccharide Man3 glycan, demonstrating that this technique may prove useful for the sequencing of complex oligosaccharides. Identification of glycosylation patterns is complicated by the lack of sensitive analytical techniques that can distinguish between epimeric carbohydrates. It has now been shown that ion-mobility tandem mass spectrometry of ions derived from glycopeptides and oligosaccharides enables glycan stereochemistry to be determined, highlighting the potential of this technique for sequencing complex carbohydrates on cell surfaces.

Brucellosis Vaccines: Assessment of Brucella melitensis Lipopolysaccharide Rough Mutants Defective in Core and O-Polysaccharide Synthesis and Export

Background The brucellae are facultative intracellular bacteria that cause brucellosis, one of the major neglected zoonoses. In endemic areas, vaccination is the only effective way to control this disease. Brucella melitensis Rev 1 is a vaccine effective against the brucellosis of sheep and goat caused by B. melitensis, the commonest source of human infection. However, Rev 1 carries a smooth lipopolysaccharide with an O-polysaccharide that elicits antibodies interfering in serodiagnosis, a major problem in eradication campaigns. Because of this, rough Brucella mutants lacking the O-polysaccharide have been proposed as vaccines. Methodology/Principal Findings To examine the possibilities of rough vaccines, we screened B. melitensis for lipopolysaccharide genes and obtained mutants representing all main rough phenotypes with regard to core oligosaccharide and O-polysaccharide synthesis and export. Using the mouse model, mutants were classified into four attenuation patterns according to their multiplication and persistence in spleens at different doses. In macrophages, mutants belonging to three of these attenuation patterns reached the Brucella characteristic intracellular niche and multiplied intracellularly, suggesting that they could be suitable vaccine candidates. Virulence patterns, intracellular behavior and lipopolysaccharide defects roughly correlated with the degree of protection afforded by the mutants upon intraperitoneal vaccination of mice. However, when vaccination was applied by the subcutaneous route, only two mutants matched the protection obtained with Rev 1 albeit at doses one thousand fold higher than this reference vaccine. These mutants, which were blocked in O-polysaccharide export and accumulated internal O-polysaccharides, stimulated weak anti-smooth lipopolysaccharide antibodies. Conclusions/Significance The results demonstrate that no rough mutant is equal to Rev 1 in laboratory models and question the notion that rough vaccines are suitable for the control of brucellosis in endemic areas.

EUROCarbDB: An open-access platform for glycoinformatics.

The EUROCarbDB project is a design study for a technical framework, which provides sophisticated, freely accessible, open-source informatics tools and databases to support glycobiology and glycomic research. EUROCarbDB is a relational database containing glycan structures, their biological context and, when available, primary and interpreted analytical data from high-performance liquid chromatography, mass spectrometry and nuclear magnetic resonance experiments. Database content can be accessed via a web-based user interface. The database is complemented by a suite of glycoinformatics tools, specifically designed to assist the elucidation and submission of glycan structure and experimental data when used in conjunction with contemporary carbohydrate research workflows. All software tools and source code are licensed under the terms of the Lesser General Public License, and publicly contributed structures and data are freely accessible. The public test version of the web interface to the EUROCarbDB can be found at http://www.ebi.ac.uk/eurocarb.

Molecular Dynamics and NMR Spectroscopy Studies of E. coli Lipopolysaccharide Structure and Dynamics

Lipopolysaccharide (LPS), a component of Gram-negative bacterial outer membranes, comprises three regions: lipid A, core oligosaccharide, and O-antigen polysaccharide. Using the CHARMM36 lipid and carbohydrate force fields, we have constructed a model of an Escherichia coli R1 (core) O6 (antigen) LPS molecule. Several all-atom bilayers are built and simulated with lipid A only (LIPA) and varying lengths of 0 (LPS0), 5 (LPS5), and 10 (LPS10) O6 antigen repeating units; a single unit of O6 antigen contains five sugar residues. From (1)H,(1)H-NOESY experiments, cross-relaxation rates are obtained from an O-antigen polysaccharide sample. Although some experimental deviations are due to spin-diffusion, the remaining effective proton-proton distances show generally very good agreement between NMR experiments and molecular dynamics simulations. The simulation results show that increasing the LPS molecular length has an impact on LPS structure and dynamics and also on LPS bilayer properties. Terminal residues in a LPS bilayer are more flexible and extended along the membrane normal. As the core and O-antigen are added, per-lipid area increases and lipid bilayer order decreases. In addition, results from mixed LPS0/5 and LPS0/10 bilayer simulations show that the LPS O-antigen conformations at a higher concentration of LPS5 and LPS10 are more orthogonal to the membrane and less flexible. The O-antigen concentration of mixed LPS bilayers does not have a significant effect on per-lipid area and hydrophobic thickness. Analysis of ion and water penetration shows that water molecules can penetrate inside the inner core region, and hydration is critical to maintain the integrity of the bilayer structure.

Structural studies of the O-polysaccharide from the lipopolysaccharide of Moraxella (Branhamella) catarrhalis serotype A (strain ATCC 25238).

The polysaccharide of the Moraxella (Branhamella) catarrhalis serotype A lipopolysaccharide was prepared by mild acid hydrolysis followed by gel permeation chromatography. The structure was established by methylation analysis, mass spectrometry, and NMR spectroscopy. It is concluded that the O-antigenic polysaccharide has the following structure. [formula see text] Methylation analysis of the intact lipopolysaccharide showed that the lipid A portion consisted of 6-substituted glucosamine residues. Methylation followed by methanolysis showed that two Kdo residues were present, one terminal and one 4,5-substituted residue. A terminal Kdo thus substitutes the branch-point Kdo in the 4-position.

The structure of the exopolysaccharide produced by the halophilic Archaeon Haloferax mediterranei strain R4 (ATCC 33500).

The halophilic Archaeon Haloferax mediterranei exudes into the growth medium a high molecular weight sulfated polysaccharide. The structure of the repeating unit of this polymer was determined by a combination of glycose, methylation, and sulfate analysis, periodate oxidation, and 1D and 2D NMR spectroscopic analysis of the native and periodate-oxidised/reduced polysaccharides. The location of the sulfate group was established from the 1H and 13C NMR data. The structure of the repeating unit of the polysaccharide may be written as [formula: see text]

Molecular dynamics simulations of an oligosaccharide using a force field modified for carbohydrates

Parameterization of the phi and omega torsion angles in pyranosidic saccharides was performed based on density functional theory calculations. The modified CHARMM force field, which is referred to as PARM22/SU01, was tested on a glucosyl trisaccharide. A molecular dynamics simulation of the oligosaccharide with explicit water as solvent was performed to investigate the conformational flexibility. Protonz.sbnd;proton distances and heteronuclear spin-spin coupling constants were calculated from the trajectories and showed good agreement to those previously determined by NMR spectroscopy.

Structure of the capsular polysaccharide from the Klebsiella K8 reference strain 1015

The structure of the capsular polysaccharide from the Klebsiella K8 reference strain 1015 has been elucidated. The structure was deduced from sugar analysis, different methylation analyses, a uronic acid degradation, and NMR spectroscopy. It is concluded that the polysaccharide is composed of pentasaccharide repeating units with the structure: [formula: see text] The structure differs from that of the previously published structure of the capsular polysaccharide from Klebsiella K8, which originates from another strain and has the following structure: [formula: see text] The serological similarity between the two strains is most likely derived from a common tetrasaccharide which is substituted in different ways in the two strains. Since the strain in the present investigation originates from the Klebsiella K reference strain collection of the International Escherichia and Klebsiella Centre, Copenhagen, Denmark, it is suggested that it should keep the designation K8. The other polysaccharide with Klebsiella K8 specificity should be renamed as K8,52,59 based on the cross-reactivity of the strain (I. Orskov, unpublished).

Structural studies of the O-antigen oligosaccharides from two strains of Moraxella catarrhalis serotype C

The oligosaccharide parts from Moraxella (Branhamella) catarrhalis serotype C lipooligosaccharides were isolated by mild acid hydrolysis followed by gel permeation chromatography. Four different oligosaccharides could be identified from strain RS26 and two from strain RS10. The structures of the O-oligosaccharides were established by methylation analyses, mass spectrometry, and NMR spectroscopy. It is concluded that the oligosaccharide O-antigens from RS26 are a mixture of octa-, deca-, and undeca-saccharides, and most likely a heptasaccharide. Strain RS10 contains the deca- and the undeca-saccharide only. The structures for the oligosaccharides are shown below. [formula: see text] OS(7) [formula: see text] OS(8) [formula: see text] OS(10) [formula: see text] OS(11) Methylation analysis of the intact lipooligosaccharides showed that two Kdo residues were present, one terminal and one 4,5-substituted residue. It also showed that they consisted of a lipid A portion with 6-substituted glucosamine residues.