Gorka Gallastegui

Performance and macrokinetic analysis of biofiltration of toluene and p-xylene mixtures in a conventional biofilter packed with inert material

Interactions of toluene and p-xylene in air treatment biofilters packed with an inert filter media were studied. The effect of the inlet load of toluene, p-xylene and mixtures of both compounds on the biodegradation rate was analyzed in three lab-scale biofilters. A maximum elimination capacity (EC) of 26.5 and 40.3 gCm(-3)h(-1) for an inlet load (IL) of 65.6 and 57.8 gCm(-3)h(-1) was obtained for p-xylene and toluene biofilters, respectively. Inhibition of p-xylene biodegradation by the presence of toluene took place when the mixture was treated, whereas the presence of p-xylene had an enhancing effect on the toluene removal efficiency. Specific growth rates (μ) from 0.019 to 0.068 h(-1) were calculated in the mixed biofilter, where the highest values were similar to mixtures with lower p-xylene levels (IL(p-Xyl) 8.84 ± 0.29 gCm(-3)h(-1)). Michaelis-Menten and Haldane type models were fitted to experimental EC for p-xylene and toluene biofilters, respectively.

A review of indoor air treatment technologies

Indoor air pollution is a complex issue involving a wide diversity and variability of pollutants that threats human health. In this context, major efforts should be made to enhance indoor air quality. Thus, it is important to start by the control of indoor pollution sources. Nevertheless, when the suppression or minimization of emission sources is insufficient, technically unfeasible, or economically unviable, abatement technologies have to be used. This review presents a general overview of single treatment techniques such as mechanical and electrical filtration, adsorption, ozonation, photolysis, photocatalytic oxidation, biological processes, and membrane separation. Since there is currently no technology that can be considered fully satisfactory for achieving “cleaner” indoor air, special attention is paid to combined purification technologies or innovative alternatives that are currently under research and have not yet been commercialized (plasma-catalytic hybrid systems, hybrid ozonation systems, biofilter-adsorption systems, etc.). These systems seem to be a good opportunity as they integrate synergetic advantages to achieve good indoor air quality.

Evaluating the impact of water supply strategies on p-xylene biodegradation performance in an organic media-based biofilter.

The influence of water irrigation on both the long-term and short-term performance of p-xylene biodegradation under several organic loading scenarios was investigated using an organic packing material composed of pelletised sawdust and pig manure. Process operation in a modular biofilter, using no external water supply other than the moisture from the saturated inlet air stream, showed poor p-xylene abatement efficiencies (≈33 ± 7%), while sustained irrigation every 25 days rendered a high removal efficiency (RE) for a critical loading rate of 120 g m(-3)h(-1). Periodic profiles of removal efficiency, temperature and moisture content were recorded throughout the biofilter column subsequent to each biofilter irrigation. Hence, higher p-xylene biodegradation rates were always initially recorded in the upper module, which resulted in a subsequent increase in temperature and a decrease in moisture content. This decrease in the moisture content in the upper module resulted in a higher removal rate in the middle module, while the moisture level in the lower module steadily increased as a result of water condensation. Based on these results, mass balance calculations performed using measured bed temperatures and relatively humidity values were successfully used to account for water balances in the biofilter over time. Finally, the absence of bed compaction after 550 days of continuous operation confirmed the suitability of this organic material for biofiltration processes.

Biomachining: metal etching via microorganisms

The use of microorganisms to remove metal from a workpiece is known as biological machining or biomachining, and it has gained in both importance and scientific relevance over the past decade. Conversely to mechanical methods, the use of readily available microorganisms is low-energy consuming, and no thermal damage is caused during biomachining. The performance of this sustainable process is assessed by the material removal rate, and certain parameters have to be controlled for manufacturing the machined part with the desired surface finish. Although the variety of microorganisms is scarce, cell concentration or density plays an important role in the process. There is a need to control the temperature to maintain microorganism activity at its optimum, and a suitable shaking rate provides an efficient contact between the workpiece and the biological medium. The systems tolerance to the sharp changes in pH is quite limited, and in many cases, an acid medium has to be maintained for effective performance. This process is highly dependent on the type of metal being removed. Consequently, the operating parameters need to be determined on a case-by-case basis. The biomachining time is another variable with a direct impact on the removal rate. This biological technique can be used for machining simple and complex shapes, such as series of linear, circular, and square micropatterns on different metal surfaces. The optimal biomachining process should be fast enough to ensure high production, a smooth and homogenous surface finish and, in sum, a high-quality piece. As a result of the high global demand for micro-components, biomachining provides an effective and sustainable alternative. However, its industrial-scale implementation is still pending.

Accelerated ageing of an EAF black slag by carbonation and percolation for long-term behaviour assessment.

The efficient reuse of industrial by-products, such as the electric arc furnace (EAF) black slag, is still hindered by concern over their long-term behaviour in outdoor environments. The aim of this study was to develop an accelerated ageing method to simulate the long-term natural carbonation of EAF slag exposed to the elements. The degree of carbonation achieved in a freshly produced slag after accelerated ageing and in a slag used on a fifteen-year-old unpaved road was very similar. The influence of particle size on accelerated carbonation was assessed, with it being concluded that the slag sample with a particle size bigger than 5-6 mm underwent slight carbonation over time when it was exposed to CO2. The accelerated ageing procedure based on percolating a previously carbonated water solution through the slag column allowed gradual leaching with simulated acid rain, as well as providing information about the gradual and total chemical release from the slag. Three classification groups were established according to the release rate of the determined elements. The joint use of the accelerated carbonation method and the percolation test is proposed as a useful tool for environmental risk assessment concerning the long-term air exposure of EAF black slag.

Hydrolytic pre-treatment methods for enhanced biobutanol production from agro-industrial wastes.

Brewery industry liquid waste (BLW), brewery spent grain (BSG), apple pomace solid wastes (APS), apple pomace ultrafiltration sludge (APUS) and starch industry wastewater (SIW) have been considered as substrates to produce biobutanol. Efficiency of hydrolysis techniques tested to produce fermentable sugars depended on nature of agro-industrial wastes and process conditions. Acid-catalysed hydrolysis of BLW and BSG gave a total reducing sugar yield of 0.433 g/g and 0.468 g/g respectively. Reducing sugar yield from microwave assisted hydrothermal method was 0.404 g/g from APS and 0.631 g/g from APUS, and, 0.359 g/g from microwave assisted acid-catalysed SIW dry mass. Parameter optimization (time, pH and substrate concentration) for acid-catalysed BLW hydrolysate utilization using central composite model technique produced 307.9 g/kg glucose with generation of inhibitors (5-hydroxymethyl furfural (20 g/kg), furfural (1.6 g/kg), levulinic acid (9.3 g/kg) and total phenolic compound (0.567 g/kg)). 10.62 g/L of acetone-butanol-ethanol was produced by subsequent clostridial fermentation of the substrate.

Wave Energy Forecasting at Three Coastal Buoys in the Bay of Biscay

In 2008, the first commercial wave farm came online in Portugal. As with other types of renewable energy, the electricity obtained from waves has the drawback of intermittency. Knowing a few hours ahead how much energy waves will hold can contribute to a better management of the electricity grid. In this work, three types of statistical models have been used to create up to 24-h forecasts of the zonal and meridional components of wave energy flux (WEF) levels at three directional buoys located off the coast in the Bay of Biscay. Each models performance has been compared at a 95% confidence level with the simplest prediction (persistence of levels), along with the forecasts provided by the physics-based WAve Modeling (WAM) wave model at the nearest grid point. The results indicate that for forecasting horizons between 3 and roughly 16 h ahead, the statistical models built on random forests (RFs) outperform the rest, including WAM and persistence.

A Unique Historical Case to Understand the Present Sustainable Development

Every innovation seeks to become a profitable business, with this considered to be the engine for economic prosperity. When an innovation is revolutionary, its long-term consequences can be revolutionary too. The Haber-Bosh process for ammonia synthesis is arguably the twentieth century’s most significant innovation, and its importance to global food production and its impact on the environment are not expected to diminish over the coming decades. The historical case of the ammonia synthesis process invented by Fritz Haber and the ensuing innovation provides an incomparable opportunity to illustrate the interactions across contemporary needs, prominent scientists, political concerns, moral dilemmas, ethics, governance and environmental implications at a time when the concept of sustainability was still in its infancy. Despite its high economic and environmental costs, no cleaner or more efficient sustainable alternative has so far been found, and so replacing this “old” innovation that still “feeds” a large part of the world’s population does not appear to be on the cards in the near future.

Microwave-assisted one-pot conversion of agro-industrial wastes into levulinic acid: An alternate approach

Brewery liquid waste (BLW), brewery spent grain (BSG), apple pomace solid wastes (APS), apple pomace ultrafiltration sludge (APUS) and starch industry waste (SIW) were evaluated as alternative feedstocks for levulinic acid (LA) production via microwave-assisted acid-catalyzed thermal hydrolysis. LA production of 204, 160, 66, 49 and 12 g/kg was observed for BLW, BSG, APS, APUS, and SIW, respectively, at 140 °C, 40 g/L substrate concentration (SC), 60 min and 2 N HCl (acid concentration). Based on the screening studies, BLW and BSG were selected for optimization studies using response surface methodology. Maximum LA production of 409 and 341 g/kg for BLW and BSG, respectively were obtained at 160 °C, 4.5 M HCl, 85 g/L SC and 27.5 min. Results demonstrated the possibility of using brewery wastes as promising substrates for economical and higher yield production of LA, a renewable platform chemical and versatile precursor for fuels and chemicals.

TRABAJANDO POR EL CUIDADO DEL PLANETA TIERRA. ACCIONES RELEVANTES EN MATERIA DE MEDIO AMBIENTE Y AGUA

Resumen Las palabras de Mahatma Gandhi (1869-1948) “Es necesario vivir sencillamente para que otros puedan, sencillamente, vivir. Gandhi” hoy en dia cobran mas sentido que nunca. El ritmo frenetico de la vida cotidiana del ser humano ha hecho que, por mas tiempo del que se debia, se deje de lado el principio basico de cuidar del ambiente que nos rodea. Hasta hace poco, el ser humano no ha sido consciente del irreversible cambio climatico que el planeta esta sufriendo, que aun siendo un proceso pausado, sus consecuencias ya son visibles. La constante alerta de los cientificos en relacion a los alarmantes niveles de contaminacion alcanzados, ha hecho que desde finales del Siglo XX se fomenten las iniciativas para el cuidado del planeta Tierra. Tanto a escala mundial, como a escala europea y estatal, la firma de estrategias y proyectos en materia de medio ambiente ha ido en aumento, haciendo posible creer en un cambio favorable. Palabras clave: medio ambiente, agua, mundial, Europa, Espana