Govindachetty Saravanan

Open-Mouthed Metallic Microcapsules: Exploring Performance Improvements at Agglomeration-Free Interiors

Although artificial capsule structures have been thoroughly investigated, functionality at the surfaces of their interiors has been surprisingly overlooked. In order to exploit this aspect of capsular structure, we here report the breakthrough fabrication of metallic (platinum) microcapsules with sufficient accessibility and electroactivity at both interior and exterior surfaces (open-mouthed platinum microcapsules), and also we demonstrate improvements in electrochemical and catalytic functions to emphasize the practical importance of our concept. The open-mouthed platinum microcapsules were prepared by template synthesis using polystyrene spheres, where surface-fused crystalline nanoparticles formed a capsule shell. Subsequent removal of the polystyrene spheres induced formation of mouth-like openings. The open-mouthed platinum microcapsules exhibit a substantial increase of their electrode capability for methanol oxidation and catalytic activities for carbon monoxide (CO) oxidation. Notably, activity loss during CO oxidation due to undesirable particle agglomeration can be drastically suppressed using the open-mouthed microcapsules.

Low‐Temperature Remediation of NO Catalyzed by Interleaved CuO Nanoplates

A copper(II)-oxide-based exhaust catalyst exhibits better activity than Pt- and Rh-nanoparticle catalysts in NO remediation at 175 °C. Following theoretical design, the CuO catalyst is rationally prepared; CuO nanoplates bearing a maximized amount of the active {001} facet are arranged in interleaved layers. A field test using a commercial gasoline engine demonstrates the ability of the catalyst to remove NO from the exhaust of small vehicles.

Pt3Ti Nanoparticles: Fine Dispersion on SiO2 Supports, Enhanced Catalytic CO Oxidation, and Chemical Stability at Elevated Temperatures

A platinum-based intermetallic phase with an early d-metal, Pt(3)Ti, has been synthesized in the form of nanoparticles (NPs) dispersed on silica (SiO(2)) supports. The organometallic Pt and Ti precursors, Pt(1,5-cyclooctadiene)Cl(2) and TiCl(4)(tetrahydrofuran)(2), were mixed with SiO(2) and reduced by sodium naphthalide in tetrahydrofuran. Stoichiometric Pt(3)Ti NPs with an average particle size of 2.5 nm were formed on SiO(2) (particle size: 20-200 nm) with an atomically disordered FCC-type structure (Fm3m; a = 0.39 nm). A high dispersivity of Pt(3)Ti NPs was achieved by adding excessive amounts of SiO(2) relative to the Pt precursor. A 50-fold excess of SiO(2) resulted in finely dispersed, SiO(2)-supported Pt(3)Ti NPs that contained 0.5 wt % Pt. The SiO(2)-supported Pt(3)Ti NPs showed a lower onset temperature of catalysis by 75 degrees C toward the oxidation reaction of CO than did SiO(2)-supported pure Pt NPs with the same particle size and Pt fraction, 0.5 wt %. The SiO(2)-supported Pt(3)Ti NPs also showed higher CO conversion than SiO(2)-supported pure Pt NPs even containing a 2-fold higher weight fraction of Pt. The SiO(2)-supported Pt(3)Ti NPs retained their stoichiometric composition after catalytic oxidation of CO at elevated temperatures, 325 degrees C. Pt(3)Ti NPs show promise as a catalytic center of purification catalysts for automobile exhaust due to their high catalytic activity toward CO oxidation with a low content of precious metals.

Synthesis and electrocatalytic performance of atomically ordered nickel carbide (Ni3C) nanoparticles

Atomically ordered nickel carbide, Ni3C, was synthesized by reduction of nickel cyclopentadienyl (NiCp2) with sodium naphthalide to form Ni clusters coordinated by Cp (Ni-Cp clusters). Ni-Cp clusters were thermally decomposed to Ni3C nanoparticles smaller than 10 nm. The Ni3C nanoparticles showed better performance than Ni nanoparticles and Au nanoparticles in the electrooxidation of sodium borohydride.

Visual observation of avidin-biotin affinity by fluorescent G4.5 poly(amidoamine) dendrimer.

An air-treated G4.5 poly(amidoamine) (PAMAM) dendrimer displayed the enhanced fluorescence enough to be utilized as a fluorescence marker to visualize avidin-biotin affinity: On a fluorescence microscopic image, the avidin labeled by a fluorescent G4.5 PAMAM dendrimer was observed to be selectively bound on the biotin pattern that was prepared by amide-bonding of biotin on a carboxylic acid-terminated self-assembled monolayer and in turn by UV-irradiation with a photomask on the monolayer.

Magnetic field effects on electric behavior of (Fe(CN) 6 ) 3 at bare and membrane-coated electrodes

Abstract The cyclic voltammetric behavior of [Fe(CN)6]3− was investigated under homogeneous magnetic fields perpendicular to the electrode surface in order to determine the effects of magnetic fields on the distribution of an Fe2+/Fe3+ redox couple. The cathodic current was enhanced much more than the anodic current by a homogeneous magnetic field, suggesting that the concentration gradient of paramagnetic [Fe(CN)6]3− and diamagnetic [Fe(CN)6]4− formed at an electrode surface may also contribute to the asymmetric current. The apparent diffusion coefficient of the redox couple increased by over 30% in both cathodic and anodic processes upon applying a magnetic field. For a gold electrode coated with dioctadecyldimethylammonium, the application of a magnetic field perpendicular to the surface increased the peak-to-peak separation, and enhanced the asymmetric current. It is inferred that the application of a magnetic field promotes the electron-tunneling process by tilting chain molecules in the barrier membrane.

Interleaved mesoporous copper for the anode catalysis in direct ammonium borane fuel cells.

Mesoporous materials with tailored microstructures are of increasing importance in practical applications particularly for energy generation and/or storage. Here we report a mesoporous copper material (MS-Cu) can be prepared in a hierarchical microstructure and exhibit high catalytic performance for the half-cell reaction of direct ammonium borane (NH3BH3) fuel cells (DABFs). Hierarchical copper oxide (CuO) nanoplates (CuO Npls) were first synthesized in a hydrothermal condition. CuO Npls were then reduced at room temperature using water solution of sodium borohydride (NaBH4) to yield the desired mesoporous copper material, MS-Cu, consisting of interleaved nanoplates with a high density of mesopores. The surface of MS-Cu comprised high-index facets, whereas a macroporous copper material (MC-Cu), which was prepared from CuO Npls at elevated temperatures in a hydrogen stream, was surrounded by low-index facets with a low density of active sites. MS-Cu exhibited a lower onset potential and improved durability for the electro-oxidation of NH3BH3 than MC-Cu or copper particles because of the catalytically active mesopores on the interleaved nanoplates.