Graham M. Gibson

Free-space information transfer using light beams carrying orbital angular momentum

We demonstrate the transfer of information encoded as orbital angular momentum (OAM) states of a light beam. The transmitter and receiver units are based on spatial light modulators, which prepare or measure a laser beam in one of eight pure OAM states. We show that the information encoded in this way is resistant to eavesdropping in the sense that any attempt to sample the beam away from its axis will be subject to an angular restriction and a lateral offset, both of which result in inherent uncertainty in the measurement. This gives an experimental insight into the effects of aperturing and misalignment of the beam on the OAM measurement and demonstrates the uncertainty relationship for OAM.

Measuring the accuracy of particle position and force in optical tweezers using high-speed video microscopy

We assess the performance of a CMOS camera for the measurement of particle position within optical tweezers and the associated autocorrelation function and power spectrum. Measurement of the displacement of the particle from the trap center can also be related to the applied force. By considering the Allan variance of these measurements, we show that such cameras are capable of reaching the thermal limits of nanometer and femtonewton accuracies, and hence are suitable for many of the applications that traditionally use quadrant photodiodes. As an example of a multi-particle measurement we show the hydrodynamic coupling between two particles.

Interactive approach to optical tweezers control

We have developed software with an interactive user interface that can be used to generate phase holograms for use with spatial light modulators. The program utilizes different hologram design techniques, allowing the user to select an appropriate algorithm. The program can be used to generate multiple beams and can be used for beam steering. We see a major application of the program to be in optical tweezers to control the position, number, and type of optical traps.

Interactive application in holographic optical tweezers of a multi-plane Gerchberg-Saxton algorithm for three-dimensional light shaping.

Phase-hologram patterns that can shape the intensity distribution of a light beam in several planes simultaneously can be calculated with an iterative Gerchberg-Saxton algorithm [T. Haist et al., Opt. Commun. 140, 299 (1997)]. We apply this algorithm in holographic optical tweezers. This allows us to simultaneously trap several objects in individually controllable arbitrary 3-dimensional positions. We demonstrate the interactive use of our approach by trapping microscopic spheres and moving them into an arbitrary 3-dimensional configuration.

Particle tracking stereomicroscopy in optical tweezers: Control of trap shape

We present an optical system capable of generating stereoscopic images to track trapped particles in three dimensions. Two-dimensional particle tracking on each image yields three dimensional position information. Our approach allows the use of a high numerical aperture (NA=1.3) objective and large separation angle, such that particles can be tracked axially with resolution of 3 nm at 340 Hz. Spatial Light Modulators (SLMs), the diffractive elements used to steer and split laser beams in Holographic Optical Tweezers, are also capable of more general operations. We use one here to vary the ratio of lateral to axial trap stiffness by changing the shape of the beam at the back aperture of the microscope objective. Beams which concentrate their optical power at the extremes of the back aperture give rise to much more efficient axial trapping. The flexibility of using an SLM allows us to create multiple traps with different shapes.

Simultaneous real-time visible and infrared video with single-pixel detectors.

Conventional cameras rely upon a pixelated sensor to provide spatial resolution. An alternative approach replaces the sensor with a pixelated transmission mask encoded with a series of binary patterns. Combining knowledge of the series of patterns and the associated filtered intensities, measured by single-pixel detectors, allows an image to be deduced through data inversion. In this work we extend the concept of a ‘single-pixel camera’ to provide continuous real-time video at 10 Hz , simultaneously in the visible and short-wave infrared, using an efficient computer algorithm. We demonstrate our camera for imaging through smoke, through a tinted screen, whilst performing compressive sampling and recovering high-resolution detail by arbitrarily controlling the pixel-binning of the masks. We anticipate real-time single-pixel video cameras to have considerable importance where pixelated sensors are limited, allowing for low-cost, non-visible imaging systems in applications such as night-vision, gas sensing and medical diagnostics.

Increasing trap stiffness with position clamping in holographic optical tweezers

We present a holographic optical tweezers system capable of position clamping multiple particles. Moving an optical trap in response to the trapped objects motion is a powerful technique for optical control and force measurement. We have now realised this experimentally using a Boulder Nonlinear Systems Spatial Light Modulator (SLM) with a refresh rate of 203Hz. We obtain a reduction of 44% in the variance of the beads position, corresponding to an increase in effective trap stiffness of 77%. This reduction relies on the generation of holograms at high speed. We present software capable of calculating holograms in under 1ms using a graphics processor unit.

Generation of achromatic Bessel beams using a compensated spatial light modulator.

We report the creation of white-light, achromatic Bessel beams using a spatial light modulator and a prism to compensate for the dispersion. Unlike the Bessel beam created by a refractive axicon, this achromatic beam has a radial wavevector and hence an intensity cross-section which is independent of wavelength. The technique also lends itself to the generation of higher order Bessel beams with an on-axis optical vortex and associated orbital angular momentum.

An optically actuated surface scanning probe

We demonstrate the use of an extended, optically trapped probe that is capable of imaging surface topography with nanometre precision, whilst applying ultra-low, femto-Newton sized forces. This degree of precision and sensitivity is acquired through three distinct strategies. First, the probe itself is shaped in such a way as to soften the trap along the sensing axis and stiffen it in transverse directions. Next, these characteristics are enhanced by selectively position clamping independent motions of the probe. Finally, force clamping is used to refine the surface contact response. Detailed analyses are presented for each of these mechanisms. To test our sensor, we scan it laterally over a calibration sample consisting of a series of graduated steps, and demonstrate a height resolution of ∼ 11 nm. Using equipartition theory, we estimate that an average force of only ∼ 140 fN is exerted on the sample during the scan, making this technique ideal for the investigation of delicate biological samples.

Touching the microworld with force-feedback optical tweezers

Optical tweezers are a powerful tool for micromanipulation and measurement of picoNewton sized forces. However, conventional interfaces present difficulties as the user cannot feel the forces involved. We present an interface to optical tweezers, based around a low-cost commercial force feedback device. The different dynamics of the micro-world make intuitive force feedback a challenge. We propose a coupling method using an existing optical tweezers system and discuss stability and transparency. Our system allows the user to perceive real Brownian motion and viscosity, as well as forces exerted during manipulation of objects by a trapped bead.