Grant E. Johnson

Influence of Charge State on Catalytic Oxidation Reactions at Metal Oxide Clusters Containing Radical Oxygen Centers

Evidence obtained by guided-ion-beam mass spectrometry experiments and density functional theory calculations indicates that by adding one oxygen atom with a full octet of valence electrons (O(2-)) to stoichiometric cationic zirconium oxide clusters (ZrO(2))(x)(+) (x = 1-4), a series of anionic clusters (Zr(x)O(2x+1))(-) (x = 1-4) are formed which contain radical oxygen centers with elongated (elongation approximately 0.24 +/- 0.02 A) metal-oxygen bonds. These anionic clusters oxidize carbon monoxide, strongly associate acetylene, and weakly associate ethylene, in contrast to the cationic species which were found previously to be highly active toward the oxidation of all three molecules. Theoretical investigations indicate that a critical hydrogen transfer step necessary for the oxidation of ethylene and acetylene at metal oxide clusters containing radical oxygen centers is energetically favorable for cationic clusters but unfavorable for the corresponding anionic species. The calculated electrostatic potential of the cluster reveals that in the case of cations, a favorable interaction with nucleophilic molecules takes place over the whole surface of the (ZrO(2))(x)(+) (x = 1-4) clusters, compared to a restricted interaction of ethylene and acetylene with the less coordinated zirconium atom in the case of the anionic (Zr(x)O(2x+1))(-) (x = 1-4) species. Therefore, in spite of the common presence of a radical oxygen center in specific anionic and cationic stoichiometries, the extent to which various classes of reactions are promoted is influenced by charge state. Moreover, the (Zr(x)O(2x+1))(-) (x = 1-4) series of anionic clusters may be regenerated by reacting oxygen deficient clusters with a strong oxidizer. This indicates that not only cationic species, as shown previously, but also anionic clusters may promote multiple cycles of carbon monoxide oxidation.

Influence of Charge State on the Mechanism of CO Oxidation on Gold Clusters

We present results from our joint experimental and theoretical study of the reactivity of anionic and cationic gold oxide clusters toward CO, focusing on the role of atomic oxygen, different charge states, and mechanisms for oxidation. We show that anionic clusters react by an Eley-Rideal-like mechanism involving the preferential attack of CO on oxygen rather than gold. In contrast, the oxidation of CO on cationic gold oxide clusters can occur by both an Eley-Rideal-like and a Langmuir-Hinshelwood-like mechanism at multiple collision conditions as a result of the high adsorption energy of two CO molecules. This large energy of CO adsorption on cationic gold oxide clusters is the driving force for the CO oxidation. Therefore, in the presence of cationic gold species at high pressures of CO, the oxidation reaction is self-promoting (i.e., the oxidation of one CO molecule is promoted by the binding of a second CO). Our findings provide new insight into the role of charge state in gold-cluster-based nanocatalysis.

Stoichiometric Zirconium Oxide Cations as Potential Building Blocks for Cluster Assembled Catalysts

Employing guided-ion-beam mass spectrometry, we identified a series of positively charged stoichiometric zirconium oxide clusters that exhibit enhanced activity and selectivity for three oxidation reactions of widespread chemical importance. Density functional theory calculations reveal that these clusters all contain the same active site consisting of a radical oxygen center with an elongated zirconium-oxygen bond. Calculated energy profiles demonstrate that each oxidation reaction is highly favorable energetically and involves easily surmountable barriers. Furthermore, the active stoichiometric clusters may be regenerated by reacting oxygen-deficient clusters with a strong oxidizer. This indicates that these species may promote multiple cycles of oxidation reactions and, therefore, exhibit true catalytic behavior. The stoichiometric clusters, having structures that resemble specific sites in bulk zirconia, are promising candidates for potential incorporation into a cluster assembled catalyst material.

Cluster reactivity experiments: Employing mass spectrometry to investigate the molecular level details of catalytic oxidation reactions

Mass spectrometry is the most widely used tool in the study of the properties and reactivity of clusters in the gas phase. In this article, we demonstrate its use in investigating the molecular-level details of oxidation reactions occurring on the surfaces of heterogeneous catalysts via cluster reactivity experiments. Guided ion beam mass spectrometry (GIB-MS) employing a quadrupole–octopole–quadrupole (Q–O–Q) configuration enables mass-selected cluster ions to be reacted with various chemicals, providing insight into the effect of size, stoichiometry, and ionic charge state on the reactivity of catalyst materials. For positively charged tungsten oxide clusters, it is shown that species having the same stoichiometry as the bulk, WO3+, W2O6+, and W3O9+, exhibit enhanced activity and selectivity for the transfer of a single oxygen atom to propylene (C3H6), suggesting the formation of propylene oxide (C3H6O), an important monomer used, for example, in the industrial production of plastics. Furthermore, the same stoichiometric clusters are demonstrated to be active for the oxidation of CO to CO2, a reaction of significance to environmental pollution abatement. The findings reported herein suggest that the enhanced oxidation reactivity of these stoichiometric clusters may be due to the presence of radical oxygen centers (W–O●) with elongated metal–oxygen bonds. The unique insights gained into bulk-phase oxidation catalysis through the application of mass spectrometry to cluster reactivity experiments are discussed.

Surface characterization of nanomaterials and nanoparticles: Important needs and challenging opportunities

This review examines characterization challenges inherently associated with understanding nanomaterials and the roles surface and interface characterization methods can play in meeting some of the challenges. In parts of the research community, there is growing recognition that studies and published reports on the properties and behaviors of nanomaterials often have reported inadequate or incomplete characterization. As a consequence, the true value of the data in these reports is, at best, uncertain. With the increasing importance of nanomaterials in fundamental research and technological applications, it is desirable that researchers from the wide variety of disciplines involved recognize the nature of these often unexpected challenges associated with reproducible synthesis and characterization of nanomaterials, including the difficulties of maintaining desired materials properties during handling and processing due to their dynamic nature. It is equally valuable for researchers to understand how characterization approaches (surface and otherwise) can help to minimize synthesis surprises and to determine how (and how quickly) materials and properties change in different environments. Appropriate application of traditional surface sensitive analysis methods (including x-ray photoelectron and Auger electron spectroscopies, scanning probe microscopy, and secondary ion mass spectroscopy) can provide information that helps address several of the analysis needs. In many circumstances, extensions of traditional data analysis can provide considerably more information than normally obtained from the data collected. Less common or evolving methods with surface selectivity (e.g., some variations of nuclear magnetic resonance, sum frequency generation, and low and medium energy ion scattering) can provide information about surfaces or interfaces in working environments (operando or in situ) or information not provided by more traditional methods. Although these methods may require instrumentation or expertise not generally available, they can be particularly useful in addressing specific questions, and examples of their use in nanomaterial research are presented.

Soft Landing of Complex Molecules on Surfaces

Soft and reactive landing of mass-selected ions onto surfaces has become a topic of substantial interest due to its promising potential for the highly controlled preparation of materials. For example, there are possible applications in the production of peptide and protein microarrays for use in high-throughput screening, protein separation and conformational enrichment of peptides, redox protein characterization, thin-film production, and the preparation of catalysts through deposition of clusters and organometallic complexes. Soft landing overcomes many of the limitations associated with conventional thin-film production techniques and offers unprecedented selectivity and specificity of preparation of deposited species. This review discusses the fundamental aspects of soft and reactive landing of mass-selected ions on surfaces that pertain to applications of these techniques in biomaterials, molecular electronics, catalysis, and interfacial chemistry.

Influence of Stoichiometry and Charge State on the Structure and Reactivity of Cobalt Oxide Clusters with CO

Cationic and anionic cobalt oxide clusters, generated by laser vaporization, were studied using guided-ion-beam mass spectrometry to obtain insight into their structure and reactivity with carbon monoxide. Anionic clusters having the stoichiometries Co2O3(-), Co2O5(-), Co3O5(-) and Co3O6(-) were found to exhibit dominant products corresponding to the transfer of a single oxygen atom to CO, indicating the formation of CO 2. Cationic clusters, in contrast, displayed products resulting from the adsorption of CO onto the cluster accompanied by the loss of either molecular O 2 or cobalt oxide units. In addition, collision induced dissociation experiments were conducted with N 2 and inert xenon gas for the anionic clusters, and xenon gas for the cationic clusters. It was found that cationic clusters fragment preferentially through the loss of molecular O 2 whereas anionic clusters tend to lose both atomic oxygen and cobalt oxide units. To further analyze how stoichiometry and ionic charge state influence the structure of cobalt oxide clusters and their reactivity with CO, first principles theoretical electronic structure studies within the density functional theory framework were performed. The calculations show that the enhanced reactivity of specific anionic cobalt oxides with CO is due to their relatively low atomic oxygen dissociation energy which makes the oxidation of CO energetically favorable. For cationic cobalt oxide clusters, in contrast, the oxygen dissociation energies are calculated to be even lower than for the anionic species. However, in the cationic clusters, oxygen is calculated to bind preferentially in a less activated molecular O 2 form. Furthermore, the CO adsorption energy is calculated to be larger for cationic clusters than for anionic species. Therefore, the experimentally observed displacement of weakly bound O 2 units through the exothermic adsorption of CO onto positively charged cobalt oxides is energetically favorable. Our joint experimental and theoretical findings indicate that positively charged sites in bulk-phase cobalt oxides may serve to bind CO to the catalyst surface and specific negatively charged sites provide the activated oxygen which leads to the formation of CO 2. These results provide molecular level insight into how size, stoichiometry, and ionic charge state influence the oxidation of CO in the presence of cobalt oxides, an important reaction for environmental pollution abatement.

Joint experimental and theoretical investigations of the reactivity of Au2On− and Au3On− (n=1–5) with carbon monoxide

The interactions between small gold oxide cluster anions, Au(2,3)O-(n) (n=1-5), and CO were investigated in a fast-flow reactor mass spectrometer, and experimental results were verified with a guided ion beam mass spectrometer. Density functional calculations along with molecular dynamics simulations were also utilized to explain the experimental findings. From these studies, we show that, for the interactions between Au(m)O-(n) and CO, each atom counts. With the addition of a single gold atom, it is observed that association of CO and replacement of O(2) by CO become the dominant reaction channels as opposed to CO oxidation. We also present results that show that the oxidation of CO takes place only in the presence of a peripheral oxygen atom. However, this condition is not always sufficient. Furthermore, the association of CO onto Au(m)O-(n) follows a general qualitative rule based on the relationship between the energy of the cluster lowest unoccupied molecular orbital and the binding energy of CO.

Oxidation of CO by Aluminum Oxide Cluster Ions in the Gas Phase

Small aluminum oxide cluster cations and anions, produced by laser vaporization, were investigated regarding their reactivity toward CO and N2O employing guided-ion-beam mass spectrometry. Clusters with the same stoichiometry as bulk alumina, Al2O3, exhibited atomic oxygen transfer products when reacted with CO, suggesting the formation of CO2. Anionic clusters were less reactive than cations but showed higher selectivity towards the transfer of only a single oxygen atom. Cationic clusters, in contrast, exhibited additional products corresponding to the sequential transfer of two oxygen atoms and the loss of an aluminum atom. To determine if these stoichiometric clusters could be generated from oxygen-deficient species, clusters having a stoichiometry with one less oxygen atom than bulk alumina, Al2O2, were reacted with N2O. Cationic clusters were found to be selectively oxidized to Al2O3(+), while anionic clusters added both one and two oxygen atoms forming Al2O3(-) and Al2O4(-). The oxygen-rich Al2O4(-) cluster exhibited comparable reactivity to Al2O3(-) when reacted with CO.

Monodisperse Au11 Clusters Prepared by Soft Landing of Mass Selected Ions

Preparation of clean monodisperse samples of clusters and nanoparticles for characterization using cutting-edge analytical techniques is essential to understanding their size-dependent properties. Herein, we report a general method for the preparation of high surface coverage samples of monodisperse clusters containing an exact number of atoms. Polydisperse solutions of diphosphine-capped gold clusters were produced by reduction synthesis. Electrospray ionization was used to introduce the clusters into the gas phase where they were filtered by mass-to-charge ratio allowing clusters of a selected size to be deposited onto carbon coated copper grids at well controlled kinetic energies. Scanning transmission electron microscopy (STEM) analysis of the soft landed clusters confirms their monodispersity and high coverage on the substrate. The soft landing approach may be extended to other materials compatible with an array of available ionization techniques and, therefore, has widespread utility as a means for controlled preparation of monodisperse samples of nanoparticles and clusters for analysis by transmission electron microscopy (TEM).