Grant Edwards

In vitro biostability of poly(dimethyl siloxane/hexamethylene oxide)-based polyurethane/layered silicate nanocomposites

We have prepared a number of silicone-based thermoplastic polyurethane (TPU) nanocomposites and demonstrated an enhancement of in vitro biostability against metal-ion-induced oxidation for potential use in long-term implantable medical devices. Organoclays based on both low-aspect-ratio hectorites and high-aspect-ratio fluoromicas were evaluated after being dual-modified with two quaternary alkyl ammonium salts with differing degrees of polarity. The resultant nanocomposites were tested for in vitro biostability using physiologically relevant oxidizing conditions. Subsequently, the effects of oxidative treatment on the surface degradation and bulk mechanical integrity of the nanocomposites were investigated and compared with the parent TPUs to identify nanocomposites with the most desirable features for long-term implantation. Here, we demonstrate that the low-aspect-ratio organohectorite was delaminated and well dispersed in the nanocomposites. Importantly, these factors gave rise to the enhanced oxidative stability. In addition, the mechanical properties of all nanocomposites were less adversely affected by the oxidative treatment compared to their parent TPUs. These results suggest the potential for improved mechanical integrity and biostability when suitable dual modified organoclays are incorporated in a silicone-based TPU.

Treatment of Silk Fibroin with Poly(ethylene glycol) for the Enhancement of Corneal Epithelial Cell Growth

A silk protein, fibroin, was isolated from the cocoons of the domesticated silkworm (Bombyx mori) and cast into membranes to serve as freestanding templates for tissue-engineered corneal cell constructs to be used in ocular surface reconstruction. In this study, we sought to enhance the attachment and proliferation of corneal epithelial cells by increasing the permeability of the fibroin membranes and the topographic roughness of their surface. By mixing the fibroin solution with poly(ethylene glycol) (PEG) of molecular weight 300 Da, membranes were produced with increased permeability and with topographic patterns generated on their surface. In order to enhance their mechanical stability, some PEG-treated membranes were also crosslinked with genipin. The resulting membranes were thoroughly characterized and compared to the non-treated membranes. The PEG-treated membranes were similar in tensile strength to the non-treated ones, but their elastic modulus was higher and elongation lower, indicating enhanced rigidity. The crosslinking with genipin did not induce a significant improvement in mechanical properties. In cultures of a human-derived corneal epithelial cell line (HCE-T), the PEG treatment of the substratum did not improve the attachment of cells and it enhanced only slightly the cell proliferation in the longer term. Likewise, primary cultures of human limbal epithelial cells grew equally well on both non-treated and PEG-treated membranes, and the stratification of cultures was consistently improved in the presence of an underlying culture of irradiated 3T3 feeder cells, irrespectively of PEG-treatment. Nevertheless, the cultures grown on the PEG-treated membranes in the presence of feeder cells did display a higher nuclear-to-cytoplasmic ratio suggesting a more proliferative phenotype. We concluded that while the treatment with PEG had a significant effect on some structural properties of the B. mori silk fibroin (BMSF) membranes, there were minimal gains in the performance of these materials as a substratum for corneal epithelial cell growth. The reduced mechanical stability of freestanding PEG-treated membranes makes them a less viable choice than the non-treated membranes.

Atomic resolution of structural changes in elastic crystals of copper (II) acetylacetonate

Single crystals are typically brittle, inelastic materials. Such mechanical responses limit their use in practical applications, particularly in flexible electronics and optical devices. Here we describe single crystals of a well-known coordination compound-copper(II) acetylacetonate-that are flexible enough to be reversibly tied into a knot. Mechanical measurements indicate that the crystals exhibit an elasticity similar to that of soft materials such as nylon, and thus display properties normally associated with both hard and soft matter. Using microfocused synchrotron radiation, we mapped the changes in crystal structure that occur on bending, and determined the mechanism that allows this flexibility with atomic precision. We show that, under strain, the molecules in the crystal reversibly rotate, and thus reorganize to allow the mechanical compression and expansion required for elasticity and still maintain the integrity of the crystal structure.

Thermoplastic polyurethane (TPU)-based polymer nanocomposites

Thermoplastic polyurethanes (TPU) are a commercially important class of thermoplastic elastomers, which have an inherent nanostructured morphology. This chapter introduces thermoplastic polyurethanes before summarizing the benefits of introducing various types of nanofillers using various processing methods and highlighting the engendered properties and performance. A detailed discussion of the influence of nanofillers on TPU morphology is provided, as well as a section on biomedical applications and nanofiller toxicity.

Allometric scaling of skin thickness, elasticity, viscoelasticity to mass for micro-medical device translation: from mice, rats, rabbits, pigs to humans

Emerging micro-scale medical devices are showing promise, whether in delivering drugs or extracting diagnostic biomarkers from skin. In progressing these devices through animal models towards clinical products, understanding the mechanical properties and skin tissue structure with which they interact will be important. Here, through measurement and analytical modelling, we advanced knowledge of these properties for commonly used laboratory animals and humans (~30 g to ~150 kg). We hypothesised that skin’s stiffness is a function of the thickness of its layers through allometric scaling, which could be estimated from knowing a species’ body mass. Results suggest that skin layer thicknesses are proportional to body mass with similar composition ratios, inter- and intra-species. Experimental trends showed elastic moduli increased with body mass, except for human skin. To interpret the relationship between species, we developed a simple analytical model for the bulk elastic moduli of skin, which correlated well with experimental data. Our model suggest that layer thicknesses may be a key driver of structural stiffness, as the skin layer constituents are physically and therefore mechanically similar between species. Our findings help advance the knowledge of mammalian skin mechanical properties, providing a route towards streamlined micro-device research and development onto clinical use.

Characterising the material properties at the interface between skin and a skin vaccination microprojection device

UNLABELLED The rapid emergence of micro-devices for biomedical applications over the past two decades has introduced new challenges for the materials used in the devices. Devices like microneedles and the Nanopatch, require sufficient strength to puncture skin often with sharp-slender micro-scale profiles, while maintaining mechanical integrity. For these technologies we sought to address two important questions: 1) On the scale at which the device operates, what forces are required to puncture the skin? And 2) What loads can the projections/microneedles withstand prior to failure. First, we used custom fabricated nanoindentation micro-probes to puncture skin at the micrometre scale, and show that puncture forces are ∼0.25-1.75mN for fresh mouse skin, in agreement with finite element simulations for our device. Then, we used two methods to perform strength tests of Nanopatch projections with varied aspect ratios. The first method used a nanoindenter to apply a force directly on the top or on the side of individual silicon projections (110μm in length, 10μm base radius), to measure the force of fracture. Our second method used an Instron to fracture full rows of projections and characterise a range of projection designs (with the method verified against previous nanoindentation experiments). Finally, we used Cryo-Scanning Electron Microscopy to visualise projections in situ in the skin to confirm the behaviour we quantified, qualitatively. STATEMENT OF SIGNIFICANCE Micro-device development has proliferated in the past decade, including devices that interact with tissues for biomedical outcomes. The field of microneedles for vaccine delivery to skin has opened new material challenges both in understanding tissue material properties and device material. In this work we characterise both the biomaterial properties of skin and the material properties of our microprojection vaccine delivery device. This study directly measures the micro-scale puncture properties of skin, whilst demonstrating clearly how these relate to device design. This will be of strong interest to those in the field of biomedical microdevices. This includes work in the field of wearable and semi-implantable devices, which will require clear understanding of tissue behaviour and material characterisation.

Effect of Processing Route on the Morphology of Thermoplastic Polyurethane (TPU) Nanocomposites Incorporating Organofluoromica

In the production of polymer nanocomposites, the processing method determines the dispersion of the nanofiller and hence, the final nanocomposite properties. In this work, the potential of high energy milling of the organofluoromica to improve the platelet dispersion and exfoliation in both solvent cast and melt processed thermoplastic polyurethane (TPU)/organofluoromica nanocomposites was investigated. The potential of high energy milling of the organofluoromica to improve the platelet dispersion and exfoliation in both solvent cast and melt processed thermoplastic polyurethane (TPU)/organofluoromica nanocomposites was investigated. The applied high energy milling process has successfully reduced this nanofiller platelet length from 640 nm to 400 nm and 250 nm after 1 hour and 2 hours respectively. These lower aspect ratio milled nanofillers resulted in improved quality of dispersion and delamination when incorporated into the TPU and hence interacted more preferentially with the TPU matrix.

Organization of mixed dimethyldioctadecylammonium and choline modifiers on the surface of synthetic hectorite

Understanding the nature of mixed surfactant self-assembly on the surface of organoclays is an important step toward optimizing their performance in polymer nanocomposites and for other potential applications, where selective surface interactions are crucial. In segmented thermoplastic polyurethane nanocomposite systems, dual-modified organoclays have shown significantly better performance compared to their single-modified counterparts. Until now, we had not fully characterized the physical chemistry of these dual-modified layered silicates, but had hypothesized that the enhanced composite performance arises due to some degree of nanoscale phase separation on the nanofiller surface, which enables enhanced compatibilization and more specific and inclusive interactions with the nanoscale hard and soft domains in these thermoplastic elastomers. This work examines the organization of quaternary alkyl ammonium compounds on the surface of Lucentite SWN using X-ray diffraction (XRD), thermogravimetric analysis (TGA), attenuated total reflectance Fourier-transfer infrared (ATR FT-IR), (13)C cross-polarization (CP)/magic angle spinning (MAS) nuclear magnetic resonance (NMR), and small-angle neutron scattering (SANS). When used in combination with choline, dimethyldioctadecylammonium (DMDO) was observed to self-assemble into discontinuous hydrophobic domains. The inner part of these hydrophobic domains was essentially unaffected by the choline (CC); however, surfactant intermixing was observed either at the periphery or throughout the choline-rich phase surrounding those domains.

Incorporation of Human Recombinant Tropoelastin into Silk Fibroin Membranes with the View to Repairing Bruch’s Membrane

Bombyx mori silk fibroin membranes provide a potential delivery vehicle for both cells and extracellular matrix (ECM) components into diseased or injured tissues. We have previously demonstrated the feasibility of growing retinal pigment epithelial cells (RPE) on fibroin membranes with the view to repairing the retina of patients afflicted with age-related macular degeneration (AMD). The goal of the present study was to investigate the feasibility of incorporating the ECM component elastin, in the form of human recombinant tropoelastin, into these same membranes. Two basic strategies were explored: (1) membranes prepared from blended solutions of fibroin and tropoelastin; and (2) layered constructs prepared from sequentially cast solutions of fibroin, tropoelastin, and fibroin. Optimal conditions for RPE attachment were achieved using a tropoelastin-fibroin blend ratio of 10 to 90 parts by weight. Retention of tropoelastin within the blend and layered constructs was confirmed by immunolabelling and Fourier-transform infrared spectroscopy (FTIR). In the layered constructs, the bulk of tropoelastin was apparently absorbed into the initially cast fibroin layer. Blend membranes displayed higher elastic modulus, percentage elongation, and tensile strength (p < 0.01) when compared to the layered constructs. RPE cell response to fibroin membranes was not affected by the presence of tropoelastin. These findings support the potential use of fibroin membranes for the co-delivery of RPE cells and tropoelastin.

In vitro degradation of a unique porous PHBV scaffold manufactured using selective laser sintering: IN VITRO DEGRADATION OF A UNIQUE POROUS PHBV SCAFFOLD

Biodegradable poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) scaffolds have shown great promise for bone tissue engineering applications. The investigation of their hydrolytic degradation is thus essential to understand the effect of hydrolysis on the complex biodegradation behavior of PHBV scaffolds. In this study, we investigated the degradation behavior of high molecular weight PHBV scaffolds manufactured using selective laser sintering (SLS) without using predesigned porous architectures. The manufactured scaffolds have high specific surface areas with great water-uptake abilities. After an incubation of 6 weeks in phosphate-buffered saline solution, the structural integrity of the scaffolds was unaffected. However, a significant decrease in molecular weight ranging from 39% to 46% was found. The measured weight loss was negligible, but their compressive modulus and strength both decreased, likely due to water plasticization. These findings suggest that hydrolytic degradation of PHBV by means of bulk degradation was the predominant mechanism, attributed to their excellent water absorptivity. Overall, the PHBV scaffolds manufactured using SLS exhibited adequate mechanical properties and satisfactory structural integrity after incubation. As a result, the scaffolds have great potential as candidates for bone repair in clinical practice.