Greg Kawchuk

Evidence-informed management of chronic low back pain with spinal manipulation and mobilization

The management of chronic low back pain (CLBP) has proven very challenging in North America, as evidenced by its mounting socioeconomic burden. Choosing among available nonsurgical therapies can be overwhelming for many stakeholders, including patients, health providers, policy makers, and third-party payers. Although all parties share a common goal and wish to use limited health-care resources to support interventions most likely to result in clinically meaningful improvements, there is often uncertainty about the most appropriate intervention for a particular patient. To help understand and evaluate the various commonly used nonsurgical approaches to CLBP, the North American Spine Society has sponsored this special focus issue of The Spine Journal, titled Evidence Informed Management of Chronic Low Back Pain Without Surgery. Articles in this special focus issue were contributed by leading spine practitioners and researchers, who were invited to summarize the best available evidence for a particular intervention and encouraged to make this information accessible to nonexperts. Each of the articles contains five sections (description, theory, evidence of efficacy, harms, and summary) with common subheadings to facilitate comparison across the 24 different interventions profiled in this special focus issue, blending narrative and systematic review methodology as deemed appropriate by the authors. It is hoped that articles in this special focus issue will be informative and aid in decision making for the many stakeholders evaluating nonsurgical interventions for CLBP.

Advancements in the management of spine disorders

Spinal disorders and especially back and neck pain affect more people and have greater impact on work capacity and health-care costs than any other musculoskeletal condition. One of the difficulties in reducing the burden of spinal disorders is the wide and heterogeneous range of specific diseases and non-specific musculoskeletal disorders that can involve the spinal column, most of which manifest as pain. Despite, or perhaps because of its impact, spinal disorders remain one of the most controversial and difficult conditions for clinicians, patients and policymakers to manage. This paper provides a brief summary of advances in the understanding of back and neck pain over the past decade as evidenced in the current literature. This paper includes the following sections: a classification of spinal disorders; the epidemiology of spine pain in the developed and developing world; key advancements in biological and biomechanical sciences in spine pain; the current status of potential methods for the prevention of back and neck pain; rheumatological and systemic disorders that impact the spine; and evidence-based surgical and non-surgical management of spine pain. The final section of this paper looks to the future and proposes actions and strategies that may be considered by the international Bone and Joint Decade (BJD), by providers, institutions and by policymakers so that we may better address the burden of spine disorders at global and local levels.

Association between history and physical examination factors and change in lumbar multifidus muscle thickness after spinal manipulation in patients with low back pain

Understanding the clinical characteristics of patients with low back pain (LBP) who display improved lumbar multifidus (LM) muscle function after spinal manipulative therapy (SMT) may provide insight into a potentially synergistic interaction between SMT and exercise. Therefore, the purpose of this study was to identify the baseline historical and physical examination factors associated with increased contracted LM muscle thickness one week after SMT. Eighty-one participants with LBP underwent a baseline physical examination and ultrasound imaging assessment of the LM muscle during submaximal contraction before and one week after SMT. The relationship between baseline examination variables and 1-week change in contracted LM thickness was assessed using correlation analysis and hierarchical multiple linear regression. Four variables best predicted the magnitude of increases in contracted LM muscle thickness after SMT. When combined, these variables suggest that patients with LBP, (1) that are fairly acute, (2) have at least a moderately good prognosis without focal and irritable symptoms, and (3) exhibit signs of spinal instability, may be the best candidates for a combined SMT and lumbar stabilization exercise (LSE) treatment approach.

Reliability of 2 Ultrasonic Imaging Analysis Methods in Quantifying Lumbar Multifidus Thickness

STUDY DESIGN Reliability study. OBJECTIVES To compare the within- and between-day intrarater reliability of rehabilitative ultrasound imaging (RUSI) using static images (static RUSI) and video clips (video RUSI) to quantify multifidus muscle thickness at rest and while contracted. Secondary objectives were to compare the measurement precision of averaging multiple measures and to estimate reliability in individuals with and without low back pain (LBP). BACKGROUND Although intrarater reliability of static RUSI in measuring multifidus thickness has been established, using video RUSI may improve reliability estimates, as it allows examiners to select the optimal image from a video clip. Further, multiple measurements and LBP status may affect RUSI reliability estimates. METHODS Static RUSI and video RUSI were used to quantify multifidus muscle thickness at rest and during contraction and percent thickness change in 27 volunteers (13 without LBP and 14 with LBP). Three static RUSI images and 3 video RUSI video clips were collected in each of 2 sessions 1 to 4 days apart. Reliability and precision were assessed using intraclass correlation coefficients, standard error of measurement, minimal detectable change, bias, and 95% limits of agreement. RESULTS Using an average of 2 measures yielded optimal measurement precision for static RUSI and video RUSI. Based on the average of 2 measures obtained under the same circumstance, there was no significant difference in the reliability estimates between static RUSI and video RUSI across all testing conditions. Reliability point estimates (intraclass correlation coefficient model 3,2) of multifidus thickness were 0.99 for within-day comparisons and ranged from 0.93 to 0.98 for between-day comparisons. The within- and between-day intraclass correlation coefficients (model 3,2) of percent thickness change ranged from 0.97 to 0.99 and from 0.80 to 0.90, respectively. The exploratory analysis showed no significant difference in the reliability estimates between asymptomatic and LBP participants across most testing conditions. CONCLUSION Both RUSI methods yielded high reliability estimates for multifidus muscle measurements. Using an average of 2 measures obtained optimal measurement precision. Overall, video RUSI is a reliable surrogate for static RUSI for multifidus muscle measurements and has the additional advantage of requiring shorter data collection time.

Reliability and Measurement Error of 3-Dimensional Regional Lumbar Motion Measures: A Systematic Review

OBJECTIVE The purpose of this study was to systematically review the literature on reproducibility (reliability and/or measurement error) of 3-dimensional (3D) regional lumbar motion measurement systems. METHODS Electronic searches were performed in PubMed, Cumulative Index of the Nursing and Allied Health Literature, Embase, and Mantis databases. To be included, original studies had to report on the reproducibility of a 3D computerized regional lumbar spinal motion analysis system in human subjects. A detailed checklist was developed based on guidelines for reporting reliability and agreement studies, the standards for reporting of diagnostic accuracy, and quality assessment of diagnostic accuracy studies and used for data extraction and quality assessment. The checklist consisted of descriptive items divided into 4 domains: study population, testing circumstances, equipment, and data analysis and presentation. The descriptive items were used as foundation for the quality assessment reflecting the reporting level of the included articles. RESULTS A total of 15 articles were included in this study. We found incomplete reporting in 1 or more domains in all articles. A varying amount of measurement error was reported in 8 of the 15 articles. Because of incomplete reporting, these reliability and measurement error estimates are difficult to interpret. CONCLUSIONS The current literature on the reliability and measurement error of measures created by regional 3D spinal instruments contains uncertainties especially in relevant clinical populations. There is uncertainty with respect to the degree that repeated measurements by 3D regional spinal motion instruments are reproducible. However, limited to the studies where reliability estimates were provided, most instruments used under standardized conditions may be considered reliable enough to be used for research purposes on the group level, but it is uncertain if they can be used on the individual patient level.

The effect of application site of spinal manipulative therapy (SMT) on spinal stiffness

BACKGROUND CONTEXT Like other factors that can influence treatment efficacy (eg, dosage, frequency, time of day), the site of treatment application is known to affect various physical interventions such as topical anesthetics and cardiopulmonary resuscitation. Like these examples, spinal manipulative therapy (SMT) is a physical intervention that may exhibit maximal benefit when directed to a specific site. Whereas numerous studies of SMT efficacy have produced mixed results, few studies have taken into account the site of SMT application. PURPOSE To determine if the site of SMT application modulates the effect of SMT in an anesthetized feline model. STUDY DESIGN Spinal manipulative therapy applied to specific anatomic locations randomized in a Latin square design with a no-SMT control. OUTCOME MEASURES Physiologic measures (spinal stiffness). METHODS Simulated SMT was delivered by a validated mechanical apparatus to the intact lumbar spine of eight anesthetized felines at four unique sites: L6 spinous process, left L6 lamina, left L6 mammillary process, and L7 spinous process. To measure spinal stiffness, a separate indentation load was applied mechanically to the L6 spinous process before and after each SMT application. Spinal stiffness was calculated from the resulting force-displacement curve as the average stiffness (k) and terminal instantaneous stiffness (TIS). RESULTS Relative to the no-SMT control, significant decreases in spinal stiffness followed the SMT when L6 spinous and L6 lamina were used as the contact site. Terminal instantaneous stiffness significantly decreased -0.48 N/mm (upper, lower 95% confidence interval [-0.86, -0.09]) with L6 spinous as the contact site and decreased -0.44 N/mm (-0.82, -0.05), with the L6 lamina as the contact site. k increased 0.44 N/mm (-0.01, 088), using L6 spinous as the contact site. CONCLUSIONS Decreases in terminal spinal stiffness were observed after SMT delivered at some application sites but not the others. The results suggest that SMT contact site modulates SMTs effect on spinal stiffness in a feline model. Changes in spinal terminal instantaneous spinal stiffness were similar in magnitude and direction to those observed in symptomatic human subjects who report benefits after SMT.

The biological basis of degenerative disc disease: proteomic and biomechanical analysis of the canine intervertebral disc

IntroductionIn the present study, we sought to quantify and contrast the secretome and biomechanical properties of the non-chondrodystrophic (NCD) and chondrodystrophic (CD) canine intervertebral disc (IVD) nucleus pulposus (NP).MethodsWe used iTRAQ proteomic methods to quantify the secretome of both CD and NCD NP. Differential levels of proteins detected were further verified using immunohistochemistry, Western blotting, and proteoglycan extraction in order to evaluate the integrity of the small leucine-rich proteoglycans (SLRPs) decorin and biglycan. Additionally, we used robotic biomechanical testing to evaluate the biomechanical properties of spinal motion segments from both CD and NCD canines.ResultsWe detected differential levels of decorin, biglycan, and fibronectin, as well as of other important extracellular matrix (ECM)-related proteins, such as fibromodulin and HAPLN1 in the IVD NP obtained from CD canines compared with NCD canines. The core proteins of the vital SLRPs decorin and biglycan were fragmented in CD NP but were intact in the NP of the NCD animals. CD and NCD vertebral motion segments demonstrated significant differences, with the CD segments having less stiffness and a more varied range of motion.ConclusionsThe CD NP recapitulates key elements of human degenerative disc disease. Our data suggest that at least some of the compromised biomechanical properties of the degenerative disc arise from fibrocartilaginous metaplasia of the NP secondary to fragmentation of SLRP core proteins and associated degenerative changes affecting the ECM. This study demonstrates that the degenerative changes that naturally occur within the CD NP make this animal a valuable animal model with which to study IVD degeneration and potential biological therapeutics.

Investigation of Lumbosacral Spine Anatomical Variation Effect on Load-Partitioning Under Follower Load Using Geometrically Personalized Finite Element Model

The spinal load sharing and mechanical stresses developed in the spine segments due to mechanical loads are dependent on the unique spinal anatomy (geometry and posture). Variation in spinal curvature alters the load sharing of the lumbar spine as well as the stiffness and stability of the passive tissues. In this paper, effects of lumbar spine curvature variation on spinal load sharing under compressive Follower Load (FL) are investigated numerically. 3D nonlinear Finite Element (FE) models of three ligamentous lumbosacral spines are developed based on personalized geometries; hypo-lordotic (Hypo-L), normal (Normal-L) and hyper-lordotic (Hyper-L) cases. Analysis of each model is performed under Follower Load and developed stress in the discs and forces in the collagen fibers are investigated.Stresses on the discs vary in magnitude and distribution depending on the degree of lordosis. A straight hypo-lordotic spine shows stresses more equally distributed among discs while a highly curved hyper-lordotic spine has stresses concentrated at lower discs. Stresses are uniformly distributed in each disc for Hypo-L case while they are concentrated posteriorly for Hyper-L case. Also, the maximum force in collagen fibers is developed in the Hyper-L case. These differences might be clinically significant related to back pain.Copyright

Leadership and capacity building in international chiropractic research: introducing the chiropractic academy for research leadership (CARL)

In an evidence-based health care environment, healthcare professions require a sustainable research culture to remain relevant. At present however, there is not a mature research culture across the chiropractic profession largely due to deficiencies in research capacity and leadership, which may be caused by a lack of chiropractic teaching programs in major universities. As a response to this challenge the Chiropractic Academy for Research Leadership, CARL, was created with the aim of develop a global network of successful early-career chiropractic researchers under the mentorship of three successful senior academics from Australia, Canada, and Denmark. The program centres upon an annual week-long program residential that rotates continental locations over the first three-year cycle and between residentials the CARL fellows work on self-initiated research and leadership initiatives. Through a competivite application process, the first cohort was selected and consists of 13 early career researchers from five professions in seven countries who represent diverse areas of interests of high relevance for chiropractic. The first residential was held in Odense, Denmark, with the second being planned in April 2018 in Edmonton, Canada, and the final residential to be held in Sydney, Australia in 2019.

Influence of Spinal Manipulative Therapy Force Magnitude and Application Site on Spinal Tissue Loading: A Biomechanical Robotic Serial Dissection Study in Porcine Motion Segments

Objective: In order to define the relation between spinal manipulative therapy (SMT) input parameters and the distribution of load within spinal tissues, the aim of this study was to determine the influence of force magnitude and application site when SMT is applied to cadaveric spines. Methods: In 10 porcine cadavers, a servo‐controlled linear actuator motor provided a standardized SMT simulation using 3 different force magnitudes (100N, 300N, and 500N) to 2 different cutaneous locations: L3/L4 facet joint (FJ), and L4 transverse processes (TVP). Vertebral kinematics were tracked optically using indwelling bone pins, the motion segment removed and mounted in a parallel robot equipped with a 6‐axis load cell. The kinematics of each SMT application were replicated robotically. Serial dissection of spinal structures was conducted to quantify loading characteristics of discrete spinal tissues. Forces experienced by the L3/L4 segment and spinal structures during SMT replication were recorded and analyzed. Results: Spinal manipulative therapy force magnitude and application site parameters influenced spinal tissues loading. A significant main effect (P < .05) of force magnitude was observed on the loads experienced by the intact specimen and supra‐ and interspinous ligaments. The main effect of application site was also significant (P < .05), influencing the loading of the intact specimen and facet joints, capsules, and ligamentum flavum (P < .05). Conclusion: Spinal manipulative therapy input parameters of force magnitude and application site significantly influence the distribution of forces within spinal tissues. By controlling these SMT parameters, clinical outcomes may potentially be manipulated.