Grigoriy A. Mun

Designing Temperature-Responsive Biocompatible Copolymers and Hydrogels Based on 2-Hydroxyethyl(meth)acrylates

Free-radical copolymerization of 2-hydroxyethyl methacrylate with 2-hydroxyethyl acrylate can be successively utilized for the synthesis of water-soluble polymers and hydrogels with excellent physicochemical properties, thus showing promise for pharmaceutical and biomedical applications. In the work presented it has been demonstrated that water-soluble copolymers based on 2-hydroxyethyl methacrylate and 2-hydroxyethyl acrylate exhibit lower critical solution temperature in aqueous solutions, whereas the corresponding high molecular weight homopolymers do not have this unique property. The temperature-induced transitions observed upon heating the aqueous solutions of these copolymers proceed via liquid-liquid phase separation. The hydrogels were also synthesized by copolymerizing 2-hydroxyethyl methacrylate and 2-hydroxyethyl acrylate in the absence of a bifunctional cross-linker. The cross-linking of these copolymers during copolymerization is believed to be due to the presence of bifunctional admixtures or transesterification reactions. Transparency, swelling behavior, mechanical properties, and porosity of the hydrogels are dependent upon the monomer ratio in the copolymers. Hydrogel samples containing more 2-hydroxyethyl methacrylate are less transparent, have lower swelling capacity, higher elastic moduli, and pores of smaller size. The assessment of the biocompatibility of the copolymers using the slug mucosal irritation test revealed that they are also less irritant than poly(acrylic acid).

Thiolated Mucoadhesive and PEGylated Nonmucoadhesive Organosilica Nanoparticles from 3-Mercaptopropyltrimethoxysilane

A novel approach has been developed to synthesize thiolated sub-100 nm organosilica nanoparticles from 3-mercaptopropyltrimethoxysilane (MPTS) through its self-condensation in dimethylsulfoxide in contact with atmospheric oxygen. The formation of MPTS nanoparticles proceeds through the condensation of methoxysilane groups and simultaneous disulfide bridging caused by partial oxidation of thiol groups. These nanoparticles showed excellent colloidal stability in dilute aqueous dispersions but underwent further self-assembly into chains and necklaces at higher concentrations. They exhibited very good ability to adhere to ocular mucosal surfaces, which can find applications in drug delivery. The thiolated nanoparticles could also be easily modified through PEGylation resulting in a loss of their mucoadhesive properties.

pH-effects in the complex formation of polymers I. Interaction of poly(acrylic acid) with poly(acrylamide)

Abstract The effects of polymer concentration, molecular weight of poly(acrylic acid) (PAA), addition of sodium, potassium, ammonium and copper (II) chlorides on the complex formation ability of the system PAA–poly(acrylamide) (PAAM) have been studied in aqueous solutions. The critical pH values of the complexation were determined in different conditions. The complex formation ability of PAAM is compared with other non-ionic polymers. It was shown that an increase in polymers concentration, molecular weight of PAA and ionic strength favours the complexation and shifts the critical pH values to the higher pH region. An addition of CuCl2 to the mixture of two polymers enhances the complexation drastically due to the formation of triple complexes.

Solvent Effects on the Formation of Nanoparticles and Multilayered Coatings Based on Hydrogen-Bonded Interpolymer Complexes of Poly(acrylic acid) with Homo- and Copolymers of N-Vinyl Pyrrolidone

The formation of hydrogen-bonded interpolymer complexes between poly(acrylic acid) and poly(N-vinyl pyrrolidone) as well as amphiphilic copolymers of N-vinyl pyrrolidone with vinyl propyl ether has been studied in aqueous and organic solutions. It was demonstrated that introduction of vinyl propyl ether units into the macromolecules of the nonionic polymer enhances their ability to form complexes in aqueous solutions due to more significant contribution of hydrophobic effects. The complexation was found to be a multistage process that involves the formation of primary polycomplex particles, which further aggregate to form spherical nanoparticles. Depending on the environmental factors (pH, solvent nature), these nanoparticles may either form stable colloidal solutions or undergo further aggregation, resulting in precipitation of interpolymer complexes. In organic solvents, the intensity of complex formation increases in the following order: methanol < ethanol < isopropanol < dioxane. The multilayered coatings were developed using layer-by-layer deposition of interpolymer complexes on glass surfaces. It was demonstrated that the solvent nature affects the efficiency of coating deposition.

Interpolymer complexes of poly(vinyl ether) of ethylene glycol with poly(carboxylic acids) in aqueous, alcohol and mixed solutions

Abstract The effect of polymer concentrations, pH, nature and molecular weight of polyacid and nature of solvent on the complex formation of poly(carboxylic acids) with poly(vinyl ether) of ethylene glycol has been studied. The role of hydrophobic interactions and ionization of polyacid in the stabilization of interpolymer complexes in aqueous solutions has been clarified. It has been shown that an increase of polymer concentrations and the hydrophobicity of polyacid shifts the critical pH values to the higher region. The competition between polymer–solvent and polymer–polymer interactions governs the complex formation processes.

Complex formation between poly(vinyl ether) of ethylene glycol and poly(acrylic acid) in aqueous and organic solutions

Interpolymer reactions between poly(acrylic acid) and poly(vinyl ether) of ethylene glycol were studied by viscometric and spectroturbidimetric methods in aqueous and organic solutions of different nature. It is shown that the formation of interpolymer complexes strongly depends on the strength of the polymer-solvent interaction. A decrease of the thermodynamical quality of the solvents should be favorable for the complexation process.

Hydrogen-Bonding-Driven Self-Assembly of PEGylated Organosilica Nanoparticles with Poly(acrylic acid) in Aqueous Solutions and in Layer-by-Layer Deposition at Solid Surfaces

PEGylated organosilica nanoparticles have been synthesized through self-condensation of (3-mercaptopropyl)trimethoxysilane in dimethyl sulfoxide into thiolated nanoparticles with their subsequent reaction with methoxypoly(ethylene glycol) maleimide. The PEGylated nanoparticles showed excellent colloidal stability over a wide range of pH in contrast to the parent thiolated nanoparticles, which have a tendency to aggregate irreversibly under acidic conditions (pH < 3.0). Due to the presence of a poly(ethylene glycol)-based corona, the PEGylated nanoparticles are capable of forming hydrogen-bonded interpolymer complexes with poly(acrylic acid) in aqueous solutions under acidic conditions, resulting in larger aggregates. The use of hydrogen-bonding interactions allows more efficient attachment of the nanoparticles to surfaces. The alternating deposition of PEGylated nanoparticles and poly(acrylic acid) on silicon wafer surfaces in a layer-by-layer fashion leads to multilayered coatings. The self-assembly of PEGylated nanoparticles with poly(acrylic acid) in aqueous solutions and at solid surfaces was compared to the behavior of linear poly(ethylene glycol). The nanoparticle system creates thicker layers than the poly(ethylene glycol), and a thicker layer is obtained on a poly(acrylic acid) surface than on a silica surface, because of the effects of hydrogen bonding. Some implications of these hydrogen-bonding-driven interactions between PEGylated nanoparticles and poly(acrylic acid) for pharmaceutical formulations are discussed.

Polycomplexes of poly(acrylic acid) with streptomycin sulfate and their antibacterial activity.

Complex formation between streptomycin sulfate and poly(acrylic acid) has been studied in aqueous solutions by turbidimetric, potentiometric and viscometric methods as well as by FTIR spectroscopy. It was shown that these polycomplexes are stabilized by electrostatic interactions. The solubility of polycomplexes was examined as a function of pH and it was found that at pH values below 3.1 the polycomplexes undergo complete dissociation or dissolution. The antimicrobial activity of the drug and its polycomplex was evaluated using Sarcina sp. as a model organism. It was demonstrated that the polycomplexes have an antimicrobial activity on the same level as the free drug.

Polymeric complexes of lidocaine hydrochloride with poly(acrylic acid) and poly(2-hydroxyethyl vinyl ether).

The specific interactions of local anesthetic lidocaine hydrochloride with poly(acrylic acid) and poly(2-hydroxyethyl vinyl ether), as well as in a triple system composed of the drug and both polymers, have been studied in aqueous solutions by viscometric, turbidimetric, potentiometric, and FTIR spectroscopic methods. The mechanism of the drug binding to the polymers and the structures of the polycomplexes formed are clarified.

Complex formation of methylcellulose with poly(acrylic acid)

Complex formation between poly(acrylic acid) and methylcellulose in aqueous solutions has been studied by viscometric and turbidimetric methods. The critical pH values in their dependence of polymer concentration were determined. The influence of the nature of a nonionic polymer on the composition and stability of interpolymer complexes is shown. The phase behaviour of acrylic acid-graft-methylcellulose copolymer in aqueous solutions is analysed from their complexation point of view. © 2000 Society of Chemical Industry