Grigory Golovin

Generation of 9 MeV γ-rays by all-laser-driven Compton scattering with second-harmonic laser light.

Gamma-ray photons with energy >9  MeV were produced when second-harmonic-generated laser light (3 eV) inverse-Compton-scattered from a counterpropagating relativistic (~450  MeV) laser-wakefield-accelerated electron beam. Two laser pulses from the same laser system were used: one to accelerate electrons and one to scatter. Since the two pulses play very different roles in the γ-ray generation process, and thus have different requirements, a novel laser system was developed. It separately and independently optimized the optical properties of the two pulses. This approach also mitigated the deleterious effects on beam focusing that generally accompany nonlinear optics at high peak-power levels.

Adaptive-feedback spectral-phase control for interactions with transform-limited ultrashort high-power laser pulses

Fourier-transform-limited light pulses were obtained at the laser-plasma interaction point of a 100-TW peak-power laser in vacuum. The spectral-phase distortion induced by the dispersion mismatching between the stretcher, compressor, and dispersive materials was fully compensated for by means of an adaptive closed-loop. The coherent temporal contrast on the sub-picosecond time scale was two orders of magnitude higher than that without adaptive control. This novel phase control capability enabled the experimental study of the dependence of laser wakefield acceleration on the spectral phase of intense laser light.

Intrinsic beam emittance of laser-accelerated electrons measured by x-ray spectroscopic imaging

The recent combination of ultra-intense lasers and laser-accelerated electron beams is enabling the development of a new generation of compact x-ray light sources, the coherence of which depends directly on electron beam emittance. Although the emittance of accelerated electron beams can be low, it can grow due to the effects of space charge during free-space propagation. Direct experimental measurement of this important property is complicated by micron-scale beam sizes, and the presence of intense fields at the location where space charge acts. Reported here is a novel, non-destructive, single-shot method that overcame this problem. It employed an intense laser probe pulse, and spectroscopic imaging of the inverse-Compton scattered x-rays, allowing measurement of an ultra-low value for the normalized transverse emittance, 0.15 (±0.06) π mm mrad, as well as study of its subsequent growth upon exiting the accelerator. The technique and results are critical for designing multi-stage laser-wakefield accelerators, and generating high-brightness, spatially coherent x-rays.

Wavefront-correction for nearly diffraction-limited focusing of dual-color laser beams to high intensities

We demonstrate wavefront correction of terawatt-peak-power laser beams at two distinct and well-separated wavelengths. Simultaneous near diffraction-limited focusability is achieved for both the fundamental (800 nm) and second harmonic (400 nm) of Ti:sapphire-amplified laser light. By comparing the relative effectiveness of various correction loops, the optimal ones are found. Simultaneous correction of both beams of different color relies on the linear proportionality between their wavefront aberrations. This method can enable two-color experiments at relativistic intensities.

Tomographic imaging of nonsymmetric multicomponent tailored supersonic flows from structured gas nozzles.

We report experimental results on the production and characterization of asymmetric and composite supersonic gas flows, created by merging independently controllable flows from multiple nozzles. We demonstrate that the spatial profiles are adjustable over a large range of parameters, including gas density, density gradient, and atomic composition. The profiles were precisely characterized using three-dimensional tomography. The creation and measurement of complex gas flows is relevant to numerous applications, ranging from laser-produced plasmas to rocket thrusters.

Selective activation with all-laser-driven Thomson γ-rays

A bright, narrow band MeV γ-ray source-ray source based on Thomson scattering using a laser-driven electron accelerator has been developed. We discuss the application of this source for selective activation in regions of high particle (neutron or gamma) production, with minimal absorption in intervening materials.

Single-shot structural analysis by high-energy X-ray diffraction using an ultrashort all-optical source

High-energy X-rays (HEX-rays) with photon energies on order of 100 keV have attractive characteristics, such as comparably low absorption, high spatial resolution and the ability to access inner-shell states of heavy atoms. These properties are advantageous for many applications ranging from studies of bulk materials to the investigation of materials in extreme conditions. Ultrafast X-ray diffraction allows the direct imaging of atomic dynamics simultaneously on its natural time and length scale. However, using HEX-rays for ultrafast studies has been limited due to the lack of sources that can generate pulses of sufficiently short (femtosecond) duration in this wavelength range. Here we show single-crystal diffraction using ultrashort ~90 keV HEX-ray pulses generated by an all-optical source based on inverse Compton scattering. We also demonstrate a method for measuring the crystal lattice spacing in a single shot that contains only ~105 photons in a spectral bandwidth of ~50% full width at half maximum (FWHM). Our approach allows us to obtain structural information from the full X-ray spectrum. As target we use a cylindrically bent Ge crystal in Laue transmission geometry. This experiment constitutes a first step towards measurements of ultrafast atomic dynamics using femtosecond HEX-ray pulses.

High-energy radiography of dense material with high flux Inverse-Compton x-ray source (Conference Presentation)

We report the high energy radiography of dense material using MeV all-optical-driven inverse Compton x-ray source. The properties of the inverse-Compton x-ray source are controlled by means of electron energy, electron charge, scattering beam focal spot size and pulse duration to obtain optimized x-ray energy and high flux for dense material radiography. In this experiment, the x-ray has a photon energy of 8 MeV for maximal steel penetration depth, and a flux of 1011 x-ray photons per shot. With this novel x-ray source, we are able to demonstrate radiography of a 10 cm thick “kite” object through a steel shielding with thickness up to 40 cm in a single exposure. The radiography image of the “kite” object though the 40 cm steel has signal to noise ratio of 2 and image contrast of 0.1, and the “kite” object can be clearly distinguished in the image. Combining its tunability, ultrafast pulse duration and micron meter resolution, the all-optical-driven inverse Compton x-ray source provides unique capacities for flash radiography of dense material, and is of interest for ultrafast nuclear physics study.

High-resolution radiography of thick steel objects using an all-laser-driven MeV-energy x-ray source

The recent development of a high-brightness MeV-photon source based on inverse-Compton scattering (ICS) has opened up exciting new possibilities for high-resolution radiography of dense objects. The x-ray beam is extremely bright, micron-source size, with mrad divergence, and high-spectral density, which makes it ideal for studies where high-resolution is required. The x-ray source is tunable over a wide range of parameters and we will discuss how the adjustable source parameters affect both transverse and longitudinal resolution. We then present results on the radiography of a thick steel object using this ICS source, and demonstrate the capabilities of this source with respect to operation at high photon energy while providing high spatial resolution.

Laser-driven electron beams with ultra-low emittance measured via inverse-compton-scattered X-rays

We report results of a novel, non-destructive, single-shot technique to measure the quality of laser-wakefield-accelerated electron beams, which is based on spectroscopic imaging of inverse-Compton-scattered x-rays.