Guangcai Gong

Influence of air stability and metabolic rate on exhaled flow

The characteristics of contaminant transport and dispersion of exhaled flow from a manikin are thoroughly studied in this article with respect to the influence of two important factors: air stability conditions and metabolic rates. Four cases with the combinations of stable and neutral conditions as well as lower (1.2 met) and higher (2 met) metabolic rates for a breathing thermal manikin are employed. The exhaled contaminant is simulated by smoke and N2 O to visualize and measure the contaminant distribution both around and in front of the manikin. The results show that the microenvironment around the manikin body can be affected by different air distribution patterns and metabolic heating. Under stable conditions, the exhaled contaminant from mouth or nose is locked and stratified at certain heights, causing potentially high contaminant exposure to others. In addition, velocity profiles of the pulsating exhaled flow, which are normalized by mean peak velocities, present similar shapes to a steady jet. The outlet velocity close to the mouth shows decrement with both exhalation temperature and body plume. The velocity decay and concentration decay also show significant dependence on air stability and metabolic level.

Measuring the exhaled breath of a manikin and human subjects

Due to scarcity of accurate information and available data of actual human breathing, this investigation focuses on characterizing the breathing dynamic process based on the measurement of healthy human subjects. The similarities and differences between one breathing thermal manikin and the human subjects, including geometry and breathing functions, were thoroughly studied. As expected, actual human breathing is more complicated than that of the manikin in terms of airflow fluctuations, individual differences, and exhaled flow directions. The simplification of manikin mouth structure could result in overestimated exhaled velocity and contaminant concentration. Furthermore, actual human breathing appears to be relatively stable and reproducible for an individual person in several conditions and is also accompanied by some uncertainties simultaneously. The averaged values are used to analyze the overall characteristics of actual human breathing. There are different characteristics of the exhaled breath between male and female subjects with or without wearing a nose clip. The experimental results obtained from the measurement of human subjects may be helpful for manikin specification or validation and accuracy assessment of CFD simulations.

Human exhalation characterization with the aid of schlieren imaging technique

n Abstractn n The purpose of this paper is to determine the dispersion and distribution characteristics of exhaled airflow for accurate prediction of disease transmission. The development of airflow dynamics of human exhalation was characterized using nonhazardous schlieren photography technique, providing a visualization and quantification of turbulent exhaled airflow from 18 healthy human subjects whilst standing and lying. The flow shape of each breathing pattern was characterized by two angles and averaged values of 18 subjects. Two exhaled air velocities, un n mn and un n pn , were measured and compared. The mean peak centerline velocity, un n mn was found to decay correspondingly with increasing horizontal distance x in a form of power function. The mean propagation velocity, un n pn was found to correlate with physiological parameters of human subjects. This was always lower than un n mn at the mouth/nose opening, due to a vortex like airflow in front of a single exhalation cycle. When examining the talking and breathing process between two persons, the potential infectious risk was found to depend on their breathing patterns and spatial distribution of their exhaled air. Our study when combined with information on generation and distributions of pathogens could provide a prediction method and control strategy to minimize infection risk between persons in indoor environments.n n