Guillaume Romet-Lemonne

Formin mDia1 senses and generates mechanical forces on actin filaments

Cytoskeleton assembly is instrumental in the regulation of biological functions by physical forces. In a number of key cellular processes, actin filaments elongated by formins such as mDia are subject to mechanical tension, yet how mechanical forces modulate the assembly of actin filaments is an open question. Here, using the viscous drag of a microfluidic flow, we apply calibrated piconewton pulling forces to individual actin filaments that are being elongated at their barbed end by surface-anchored mDia1 proteins. We show that mDia1 is mechanosensitive and that the elongation rate of filaments is increased up to two-fold by the application of a pulling force. We also show that mDia1 is able to track a depolymerizing barbed end in spite of an opposing pulling force, which means that mDia1 can efficiently put actin filaments under mechanical tension. Our findings suggest that formin function in cells is tightly coupled to the mechanical activity of other machineries.

Cellular Control of Cortical Actin Nucleation

Summary The contractile actin cortex is a thin layer of actin, myosin, and actin-binding proteins that subtends the membrane of animal cells. The cortex is the main determinant of cell shape and plays a fundamental role in cell division [1–3], migration [4], and tissue morphogenesis [5]. For example, cortex contractility plays a crucial role in amoeboid migration of metastatic cells [6] and during division, where its misregulation can lead to aneuploidy [7]. Despite its importance, our knowledge of the cortex is poor, and even the proteins nucleating it remain unknown, though a number of candidates have been proposed based on indirect evidence [8–15]. Here, we used two independent approaches to identify cortical actin nucleators: a proteomic analysis using cortex-rich isolated blebs, and a localization/small hairpin RNA (shRNA) screen searching for phenotypes with a weakened cortex or altered contractility. This unbiased study revealed that two proteins generated the majority of cortical actin: the formin mDia1 and the Arp2/3 complex. Each nucleator contributed a similar amount of F-actin to the cortex but had very different accumulation kinetics. Electron microscopy examination revealed that each nucleator affected cortical network architecture differently. mDia1 depletion led to failure in division, but Arp2/3 depletion did not. Interestingly, despite not affecting division on its own, Arp2/3 inhibition potentiated the effect of mDia1 depletion. Our findings indicate that the bulk of the actin cortex is nucleated by mDia1 and Arp2/3 and suggest a mechanism for rapid fine-tuning of cortex structure and mechanics by adjusting the relative contribution of each nucleator.

Individual Actin Filaments in a Microfluidic Flow Reveal the Mechanism of ATP Hydrolysis and Give Insight Into the Properties of Profilin

A novel microfluidic approach allows the analysis of the dynamics of individual actin filaments, revealing both their local ADP/ADP-Pi-actin composition and that Pi release is a random mechanism.

Oxidation of F-actin controls the terminal steps of cytokinesis

Cytokinetic abscission, the terminal step of cell division, crucially depends on the local constriction of ESCRT-III helices after cytoskeleton disassembly. While the microtubules of the intercellular bridge are cut by the ESCRT-associated enzyme Spastin, the mechanism that clears F-actin at the abscission site is unknown. Here we show that oxidation-mediated depolymerization of actin by the redox enzyme MICAL1 is key for ESCRT-III recruitment and successful abscission. MICAL1 is recruited to the abscission site by the Rab35 GTPase through a direct interaction with a flat three-helix domain found in MICAL1 C terminus. Mechanistically, in vitro assays on single actin filaments demonstrate that MICAL1 is activated by Rab35. Moreover, in our experimental conditions, MICAL1 does not act as a severing enzyme, as initially thought, but instead induces F-actin depolymerization from both ends. Our work reveals an unexpected role for oxidoreduction in triggering local actin depolymerization to control a fundamental step of cell division.

Spire and Formin 2 Synergize and Antagonize in Regulating Actin Assembly in Meiosis by a Ping-Pong Mechanism

An in vitro study reveals how the three actin binding proteins profilin, formin 2, and Spire functionally cooperate by a ping-pong mechanism to regulate actin assembly during reproductive cell division.

Mycolactone activation of Wiskott-Aldrich syndrome proteins underpins Buruli ulcer formation

Mycolactone is a diffusible lipid secreted by the human pathogen Mycobacterium ulcerans, which induces the formation of open skin lesions referred to as Buruli ulcers. Here, we show that mycolactone operates by hijacking the Wiskott-Aldrich syndrome protein (WASP) family of actin-nucleating factors. By disrupting WASP autoinhibition, mycolactone leads to uncontrolled activation of ARP2/3-mediated assembly of actin in the cytoplasm. In epithelial cells, mycolactone-induced stimulation of ARP2/3 concentrated in the perinuclear region, resulting in defective cell adhesion and directional migration. In vivo injection of mycolactone into mouse ears consistently altered the junctional organization and stratification of keratinocytes, leading to epidermal thinning, followed by rupture. This degradation process was efficiently suppressed by coadministration of the N-WASP inhibitor wiskostatin. These results elucidate the molecular basis of mycolactone activity and provide a mechanism for Buruli ulcer pathogenesis. Our findings should allow for the rationale design of competitive inhibitors of mycolactone binding to N-WASP, with anti-Buruli ulcer therapeutic potential.

Arp2/3 Controls the Motile Behavior of N-WASP-Functionalized GUVs and Modulates N-WASP Surface Distribution by Mediating Transient Links with Actin Filaments

Spatially controlled assembly of actin in branched filaments generates cell protrusions or the propulsion of intracellular vesicles and pathogens. The propulsive movement of giant unilamellar vesicles (GUVs) functionalized by N-WASP (full-length or truncated) is reconstituted in a biochemically controlled medium, and analyzed using phase contrast and fluorescence microscopy to elucidate the links between membrane components and the actin cytoskeleton that determine motile behavior. Actin-based propulsion displays a continuous regime or a periodic saltatory regime. The transition between the two regimes is controlled by the concentration of Arp2/3 complex, which branches filaments by interacting with N-WASP at the liposome surface. Saltatory motion is linked to cycles in the distribution of N-WASP at the membrane between a homogeneous and a segregated state. Comparison of the changes in distribution of N-WASP, Arp2/3, and actin during propulsion demonstrates that actin filaments bind to N-WASP, and that these bonds are transitory. This interaction, mediated by Arp2/3, drives N-WASP segregation. VC-fragments of N-WASP, that interact more weakly than N-WASP with the Arp2/3 complex, segregate less than N-WASP at the rear of the GUVs. GUV propulsion is inhibited by the presence of VCA-actin covalent complex, showing that the release of actin from the nucleator is required for movement. The balance between segregation and free diffusion determines whether continuous movement can be sustained. Computed surface distributions of N-WASP, derived from a theoretical description of this segregation-diffusion mechanism, account satisfactorily for the measured density profiles of N-WASP, Arp2/3 complex, and actin.

CDC42 switches IRSp53 from inhibition of actin growth to elongation by clustering of VASP

Filopodia explore the environment, sensing soluble and mechanical cues during directional motility and tissue morphogenesis. How filopodia are initiated and spatially restricted to specific sites on the plasma membrane is still unclear. Here, we show that the membrane deforming and curvature sensing IRSp53 (Insulin Receptor Substrate of 53 kDa) protein slows down actin filament barbed end growth. This inhibition is relieved by CDC42 and counteracted by VASP, which also binds to IRSp53. The VASP:IRSp53 interaction is regulated by activated CDC42 and promotes high‐density clustering of VASP, which is required for processive actin filament elongation. The interaction also mediates VASP recruitment to liposomes. In cells, IRSp53 and VASP accumulate at discrete foci at the leading edge, where filopodia are initiated. Genetic removal of IRSp53 impairs the formation of VASP foci, filopodia and chemotactic motility, while IRSp53 null mice display defective wound healing. Thus, IRSp53 dampens barbed end growth. CDC42 activation inhibits this activity and promotes IRSp53‐dependent recruitment and clustering of VASP to drive actin assembly. These events result in spatial restriction of VASP filament elongation for initiation of filopodia during cell migration, invasion, and tissue repair.

Dimeric WH2 domains in Vibrio VopF promote actin filament barbed-end uncapping and assisted elongation

Proteins containing repeats of the WASP homology 2 (WH2) actin-binding module are multifunctional regulators of actin nucleation and assembly. The bacterial effector VopF in Vibrio cholerae, like VopL in Vibrio parahaemolyticus, is a unique homodimer of three WH2 motifs linked by a C-terminal dimerization domain. We show that only the first and third WH2 domains of VopF bind G-actin in a non-nucleating, sequestered conformation. Moreover, dimeric WH2 domains in VopF give rise to unprecedented regulation of actin assembly. Specifically, two WH2 domains on opposite protomers of VopF direct filament assembly from actin or profilin–actin by binding terminal subunits and uncapping capping protein from barbed ends by a new mechanism. Thus, VopF does not nucleate filaments by capping a pointed-end F-actin hexamer. These properties may contribute to VopF pathogenicity, and they show how dimeric WH2 peptides may mediate processive filament growth.

Formin and capping protein together embrace the actin filament in a ménage à trois

Proteins targeting actin filament barbed ends play a pivotal role in motile processes. While formins enhance filament assembly, capping protein (CP) blocks polymerization. On their own, they both bind barbed ends with high affinity and very slow dissociation. Their barbed-end binding is thought to be mutually exclusive. CP has recently been shown to be present in filopodia and controls their morphology and dynamics. Here we explore how CP and formins may functionally coregulate filament barbed-end assembly. We show, using kinetic analysis of individual filaments by microfluidics-assisted fluorescence microscopy, that CP and mDia1 formin are able to simultaneously bind barbed ends. This is further confirmed using single-molecule imaging. Their mutually weakened binding enables rapid displacement of one by the other. We show that formin FMNL2 behaves similarly, thus suggesting that this is a general property of formins. Implications in filopodia regulation and barbed-end structural regulation are discussed.