Guillermo Zaragoza

Pentadentate thiosemicarbazones as versatile chelating systems. A comparative structural study of their metallic complexes

We have prepared some transition and post-transition metal complexes derived from the pentadentate thiosemicarbazone ligand bis(4-N-ethylthiosemicarbazone)-2,6-diacetylpyridine H(2)L(Et), by both chemical and electrochemical procedures. The complexes have been synthesised and fully characterised, including the crystal structures for the ligand H(2)L(Et) and its manganese, cadmium and lead complexes. We have also performed multinuclear (109)Ag, (113)Cd, (119)Sn and (207)Pb studies for silver, cadmium, tin and lead compounds, respectively. Moreover we present here a comparative study on the different structures found for pentadentate thiosemicarbazonate complexes, trying to check the influence of different factors, such as experimental procedure, size of metal, structure of the ligand, and metal oxidation state, on the final structure of the complex formed. Our aim is gaining a better insight into the coordination trends of pentadentate thiosemicarbazone ligands.

Influence of the metal size in the structure of the complexes derived from a pentadentate [N3O2] hydrazone

The influence of the metal size in the nuclearity of the complexes derived from the hydrazone ligand 2,6-bis(1-salicyloylhydrazonoethyl)pyridine [H(4)daps] has been investigated. We have synthesised a series of new complexes [M(H(x)daps)] x yH(2)O, (x = 2,3; y = 0-3) with M = Ag (1), Cd (2), Al (3), Sn (4) and Pb (6), using an electrochemical procedure. The crystal and molecular structures have been determined for the mononuclear complexes [Sn(H(2)daps)(H(2)O)(2)] x 4H(2)O (5) and [Pb(H(2)daps)(CN)][Et(4)N] (7). Complex is the first neutral Sn(II) complex derived from a pentadentate hydrazone Schiff base ligand. Complex shows the lead coordinated to the hydrazone donor set and a cyanide ligand, being the first reported complex with the lead atom coordinated to a monodentate cyanide group. Additionally, we have synthesised the lead complex using chemical conditions, in the presence of sodium cyanide which allowed us to isolate the neutral complex [Pb(H(2)daps)] (8). Evaporation of these mother liquors led the novel compound [Pb(Hdaphs)(CH(3)COO)] (9). Complex 9 shows the initial ligand hydrolysed in one of the imine bonds giving rise to a new tetradentate ligand [H(2)daphs] coordinated to the lead atom and a bidentate acetate group. Moreover, the solution behaviour of the complexes has been investigated by (1)H, (113)Cd, (117)Sn and (207)Pb NMR techniques. In particular multinuclear NMR has provided new useful data to correlate factors such as oxidation state, coordination number and nature of the kernel donor atoms due to the new coordination found in complexes 5 and 7. The comparative study of the structures of the complexes derived from this pentadentate [N(3)O(2)] hydrazone ligand let us to conclude that the metal size is a key factor to control the nuclearity of the complexes derived from the ligand [H(4)daps].

First Examples of Metal−Organic Frameworks with the Novel 3,3'- (1,2,4,5-Tetrazine-3,6-diyl)dibenzoic Spacer. Luminescence and Adsorption Properties

We report the synthesis of a novel ligand, 3,3-(1,2,4,5-tetrazine-3,6-diyl)dibenzoic acid (1). In this fragment, we have introduced two carboxylate groups with the aim of using this ligand as a linker to construct three-dimensional metal-organic frameworks (MOFs). We have been successful in the formation of zinc (2) and lanthanum (3) MOFs. The zinc compound is a two-dimensional structure, while the lanthanum material is a three-dimensional MOF with interesting channels. We include the luminescence and adsorption studies of these materials. Moreover, we have evaluated the in vitro toxicity of this novel ligand, concluding that it can be considered negligible.

Tandem catalysis of ring-closing metathesis/atom transfer radical reactions with homobimetallic ruthenium–arene complexes

Summary The tandem catalysis of ring-closing metathesis/atom transfer radical reactions was investigated with the homobimetallic ruthenium–indenylidene complex [(p-cymene)Ru(μ-Cl)3RuCl(3-phenyl-1-indenylidene)(PCy3)] (1) to generate active species in situ. The two catalytic processes were first carried out independently in a case study before the whole sequence was optimized and applied to the synthesis of several polyhalogenated bicyclic γ-lactams and lactones from α,ω-diene substrates bearing trihaloacetamide or trichloroacetate functionalities. The individual steps were carefully monitored by 1H and 31P NMR spectroscopies in order to understand the intimate details of the catalytic cycles. Polyhalogenated substrates and the ethylene released upon metathesis induced the clean transformation of catalyst precursor 1 into the Ru(II)–Ru(III) mixed-valence compound [(p-cymene)Ru(μ-Cl)3RuCl2(PCy3)], which was found to be an efficient promoter for atom transfer radical reactions under the adopted experimental conditions.

Coordinative trends of a tridentate thiosemicarbazone ligand: synthesis, characterization, luminescence studies and desulfurization processes

The coordinative chemistry of the tridentate thiosemicarbazone ligand 2-pyridinecarboxaldehyde 4-N-ethylthiosemicarbazone (HL(Et)) has been explored by using an electrochemical methodology. All the complexes have been characterized using analytical and spectroscopic techniques. In the case of copper we have isolated two different complexes, with Cu(L(Et))(2).4H(2)O (6) and [Cu(2)(L(Et))(2)(SO(4))] (7) formulae. The sulfate group coordinated to the copper atoms in was probably released to the media as a consequence of a desulfurization process. Single X-ray crystallography has been carried out for the ligand HL(Et) and the complexes , [Ag(6)(L(Et))(6)].CH(3)CN (9) and [Pb(L(Et))(2)] (2). The copper(ii) complex is a dimer compound in which two antiparallel monodeprotonated ligands are coordinated to two copper centres by establishment of mu(2)-thiolate bridges and the additional coordination of a sulfate group bridging the two metal atoms. The silver complex is an unusual hexanuclear cluster compound with a wheel-type conformation, while the lead complex is a monomer which exhibits the lone pair effect. A structural comparative study of the electrochemically obtained complexes derived from HL(X) ligands (X= Me, Et and Ph) have been performed. Finally, the solution behaviour of the complexes was checked by NMR, UV and fluorescence studies.

Assessing the ligand properties of 1,3-dimesitylbenzimidazol-2-ylidene in ruthenium-catalyzed olefin metathesis

The deprotonation of 1,3-dimesitylbenzimidazolium tetrafluoroborate with a strong base afforded 1,3-dimesitylbenzimidazol-2-ylidene (BMes), which was further reacted in situ with rhodium or ruthenium complexes to afford three new organometallic products. The compounds [RhCl(COD)(BMes)] (COD is 1,5-cyclooctadiene) and cis-[RhCl(CO)2(BMes)] were used to probe the steric and electronic parameters of BMes. Comparison of the percentage of buried volume (%V(Bur)) and of the Tolman electronic parameter (TEP) of BMes with those determined previously for 1,3-dimesitylimidazol-2-ylidene (IMes) and 1,3-dimesitylimidazolin-2-ylidene (SIMes) revealed that the three N-heterocyclic carbenes (NHCs) had very similar profiles. Nonetheless, changes in the hydrocarbon backbone subtly affected the stereoelectronic properties of these ligands. Accordingly, the corresponding [RuCl2(PCy3)(NHC)(=CHPh)] complexes displayed different catalytic behaviors in the ring-closing metathesis (RCM) of α,ω-dienes. In the benchmark cyclization of diethyl 2,2-diallylmalonate, the new [RuCl2(PCy3)(BMes)(=CHPh)] compound (1d) performed slightly better than the Grubbs second-generation catalyst (1a), which was in turn significantly more active than the related [RuCl2(PCy3)(IMes)(=CHPh)] initiator (1b). For the formation of a model trisubstituted cycloolefin, complex 1d ranked in-between catalyst precursors 1a and 1b, whereas in the RCM of tetrasubstituted cycloalkenes it lost its catalytic efficiency much more rapidly.

From monomers to polymers: Steric and supramolecular effects on dimensionality of coordination architectures of heteroleptic mercury(ii) halogenide-tetradentate Schiff base complexes

In this study, neutral mercury(II) complexes of the composition [Hg(L1)(μ-Cl)2Hg3Cl6]n (1), [Hg(L1)(μ-Br)2HgBr2] (2), [Hg(L3)Br2] (2a), [Hg(L1)I2] (3), [Hg(L2)Cl2]·CH3OH (4) and [Hg(L2)(μ-Br)HgBr3]2 (5) (L1 = benzilbis((pyridin-2-yl)methylidenehydrazone); L2 = benzilbis((acetylpyridin-2-yl)methylidenehydrazone)) are described. Single-crystal X-ray crystallography showed that the molecular complexes can aggregate into larger entities depending upon the anion coordinated to the metal centre. Iodide gives discrete monomeric complexes, bromide generates a 1D coordination polymer formed through Hg–Br–Hg bridges and chloride gives rise to an inorganic–organic hybrid material. The significant differences in the reaction conditions indicate that the anions exert a substantial influence on the formation of the compounds – smaller anions show a larger potential for bridging metal ions and forming coordination polymers. A minute increase in the bulkiness of the ligand (two extra methyl substituents in L2) dramatically changes the coordination architectures, and leads to the formation of monomeric (chloride and iodide) and oligomeric (bromide) structures, rather than polymeric structures. The noncovalent C–H/π and π-hole interactions observed in the solid state architecture of some complexes have been rationalized by means of theoretical DFT calculations.

The coordination preferences of metal centres modulate superexchange coupling interactions in a metallo-supramolecular helical assembly

A method to modulate the strength of the superexchange coupling interaction in dinuclear helical assemblies based on the coordination preferences of the metal centres is described.

Cl–OH ion‐exchanging process in chlorapatite (Ca5(PO4)3Clx(OH)1 − x) – a deep insight

We have synthesized large chlorapatite [ClAp, Ca(5)(PO(4))(3)Cl(x)(OH)(1-x), where x = 1] single crystals using the molten salt method. We have corroborated that the hexagonal symmetry P6(3)/m describes the crystal structure best, even though the crystals are synthetic and stoichiometric. Moreover, we have performed several thermal treatments on these ClAp crystals, generating new single crystals in the apatite system [Ca(5)(PO(4))(3)Cl(x)(OH)(1-x), where x ≤ 1], where the chloride anions (Cl(-)) were systematically substituted by hydroxyl anions (OH(-)). These new single crystals were methodically characterized by powder and single-crystal X-ray diffraction (SXRD), scanning electron microscopy (SEM), Fourier transform-IR spectroscopy (FT-IR), and energy-dispersive X-ray spectroscopy (EDS). We have discovered a previously unreported OH(-) inclusion site substituting the Cl(-) anion during the ion-exchanging process. Finally, we evaluated the atomic rearrangements of the other species involved in the structure. These movements are associated with ionic exchange, which can be justified from an energetic point of view. We also found a novel phase transformation at high temperature. When the crystals are heated over 1753 K the apatite system evolves to a less ordered monoclinic structure, in which the complete loss of the species in the anionic channel (Cl(-), OH(-)) has been confirmed.

Unprecedent isolation of a mixture of conformational and linkage isomers in a thiosemicarbazone cobalt mesocate.

A cobalt(II) thiosemicarbazonate mesocate has been structurally characterized as an unexpected mixture of conformational and linkage isomers. Moreover, we have shown that the absence of a nitrogen atom in the spacer of the helicand ligand H(2)L(a), enables the assembly of an achiral mesohelical complex in the case of Co(II) ions.