Guiqiu Chen

Cadmium removal from simulated wastewater to biomass byproduct of Lentinus edodes

A kind of agricultural waste, the byproduct of brown-rot fungus Lentinus edodes, was used as an efficient biosorbent for the removal of cadmium from water in this paper. The sorption conditions, such as pH, the dose of biomass and the initial concentration of cadmium were examined. Three kinds of adsorption models were applied to simulate the biosorption data. Uptake of cadmium was higher in weak acid condition than in strong acid condition. Nearly no sorption of cadmium occurred when the pH value was lower than 2.5. Biosorption isothermal data could be well simulated by Freundlich model, and then Langmuir and Temkin model. Langmuir simulation of the biosorption showed that the maximum uptake of cadmium was 5.58mmol/g in weak acid condition, which was much higher than many other biosorbents. The exchanged proton was highly related to the uptake of cadmium in weak acid condition. Fourier transform infrared spectrums and energy-dispersive X-ray microanalyzer were used to reveal ion-exchange mechanism between cadmium and the functional groups or participated inorganic metal ions during biosorption.

Treatment of landfill leachate using immobilized Phanerochaete chrysosporium loaded with nitrogen-doped TiO2 nanoparticles

This study investigated the performance of immobilized Phanerochaete chrysosporium loaded with nitrogen-doped TiO2 nanoparticles in the treatment of raw landfill leachate with a very low biodegradability ratio (BOD5/COD) of 0.09. The effects of various operating parameters, such as initial chemical oxygen demand (COD) concentration, pH, temperature, and biosorbent dosage, were evaluated with respect to the removal efficiency of total organic carbon (TOC) and ammonia nitrogen (NH3-N). For the immobilized biosorbents, an optimum pH of 6.0 for TOC and 7.0 for NH3-N were found suitable for TOC and NH3-N removal at temperature of 37°C, respectively. The most superior removal efficiencies of TOC and NH3-N of landfill leachate were over 75% and 74% in 72 h at an initial COD concentration of 200 mg L(-1), respectively. In addition, heavy metals were partly removed by the immobilized biosorbents during the process of landfill leachate treatment. The species and mass percentage of organic compounds in landfill leachate after the treatment were found to have considerably declined according to the gas chromatography coupled with mass spectrometry (GC-MS) system. These results indicate that the immobilized P. chrysosporium loaded with nitrogen-doped TiO2 nanoparticles could be a convenient and efficient method for the treatment of landfill leachate.

Effective removal of Cr(VI) through adsorption and reduction by magnetic mesoporous carbon incorporated with polyaniline

Magnetic mesoporous carbon incorporated with polyaniline (PANI–Fe/OMC) is developed for enhanced adsorption and reduction of toxic Cr(VI) to non-toxic Cr(III). Several physicochemical techniques including TEM, FTIR and XPS analyses confirmed that magnetic iron nanoparticles and amino groups have been successfully bound on the mesoporous matrix. The adsorption capacity of the functionalized material is two- and ten-fold that of the magnetic mesoporous carbon (Fe/OMC) and pristine mesoporous silicon (SBA-15), respectively. Solution pH exhibited a remarkable impact on the Cr(VI) adsorption and the maximum uptake amount (172.33 mg g−1) occurred at pH 2.0. The good fitting of adsorption process using pseudo-second-order and Langmuir models indicated the chemisorption process of Cr(VI) removal. The regeneration study revealed that PANI–Fe/OMC can be reused without loss of their activity in repetitive adsorption tests. Moreover, the resultant adsorbent can be effectively applied in actual wastewater treatment due to the excellent removal performance in fixed-bed column and real water samples. The interaction between Cr(VI) and PANI–Fe/OMC was investigated by FTIR and XPS analyses. The results indicate that the amino groups on the surface of PANI–Fe/OMC are involved in Cr(VI) uptake, and simultaneously some toxic Cr(VI) are reduced to non-toxic Cr(III) during the removal process.

Surface-modified Phanerochaete chrysosporium as a biosorbent for Cr(VI)-contaminated wastewater

To improve the removal efficiency of heavy metals from wastewater, the surface of a fungal biomass was modified to obtain a high-capacity biosorbent for Cr(VI) in wastewater. The effects of pH, initial concentration, and sorption time on Cr(VI) removal by polyethylenimine (PEI)-modified Phanerochaete chrysosporium were investigated. The biomass adsorption capacity was significantly dependent on the pH of the solution, and the optimum pH was approximately 3.0. The maximum removal for Cr(VI) was 344.8 mg/g as determined with the Langmuir adsorption isotherm. Pseudo-first-order Lagergren model is better than pseudo-second-order Lagergren model when simulating the kinetic experiment results. Furthermore, an amount of Cr(VI) was reduced to Cr(III), indicating that some reactions occurred on the surface of the biomass leading to the reduction of Cr(VI). The point of zero potential for the modified biomass increased from an initial pH of 3.0 to a much higher value of 10.8, indicating that the PEI-modified biomass is better than the pristine biomass for adsorption of anionic adsorbates. Results showed that the PEI-modified biosorbent presented high efficiency in treating Cr(VI)-contaminated wastewater.

Acyl-homoserine lactone-based quorum sensing and quorum quenching hold promise to determine the performance of biological wastewater treatments: An overview.

Quorum sensing (QS) is a communication process between cells, in which bacteria secrete and sense the specific chemicals, and regulate gene expression in response to population density. Quorum quenching (QQ) blocks QS system, and inhibits gene expression mediating bacterial behaviors. Given the extensive research of acyl-homoserine lactone (AHL) signals, existences and effects of AHL-based QS and QQ in biological wastewater treatments are being subject to high concern. This review summarizes AHL structure, synthesis mode, degradation mechanisms, analytical methods, environmental factors, AHL-based QS and QQ mechanisms. The existences and roles of AHL-based QS and QQ in biomembrane processes, activated sludge processes and membrane bioreactors are summarized and discussed, and corresponding exogenous regulation strategy by selective enhancement of AHL-based QS or QQ coexisting in biological wastewater treatments is suggested. Such strategies including the addition of AHL signals, AHL-producing bacteria as well as quorum quenching enzyme or bacteria can effectively improve wastewater treatment performance without killing or limiting bacterial survival and growth. This review will present the theoretical and practical cognition for bacterial AHL-based QS and QQ, suggest the feasibility of exogenous regulation strategies in biological wastewater treatments, and provide useful information to scientists and engineers who work in this field.

Facile green extracellular biosynthesis of CdS quantum dots by white rot fungus Phanerochaete chrysosporium

This study details a novel method for the extracellular microbial synthesis of cadmium sulfide (CdS) quantum dots (QDs) by the white rot fungus Phanerochaete chrysosporium. P. chrysosporium was incubated in a solution containing cadmium nitrate tetrahydrate, which became yellow from 12h onwards, indicating the formation of CdS nanocrystals. The purified solution showed a maximum absorbance peak between 296 and 298 nm due to CdS particles in the quantum size regime. The fluorescence emission at 458 nm showed the blue fluorescence of the nanoparticles. X-ray analysis of the nanoparticles confirmed the production of CdS with a face-centered cubic (fcc) crystal structure. The average grain size of the nanoparticles was approximately 2.56 nm, as determined from the full width at half-maximum (FWHM) measurement of the most intense peak using Scherers equation. Transmission electron microscopic analysis showed the nanoparticles to be of a uniform size with good crystallinity. The changes to the functional groups on the biomass surface were investigated through Fourier transform infrared spectroscopy. Furthermore, the secretion of cysteine and proteins was found to play an important role in the formation and stabilization of CdS QDs. In conclusion, our study outlines a chemical process for the molecular synthesis of CdS nanoparticles.

Comprehensive evaluation of the cytotoxicity of CdSe/ZnS quantum dots in Phanerochaete chrysosporium by cellular uptake and oxidative stress

The growing potential of quantum dots (QDs) in biological and biomedical applications has raised considerable concern due to their toxicological impact. Consequently, it is urgent to elucidate the underlying toxicity mechanism of QDs. In this work, we comprehensively investigated the cellular uptake of four CdSe/ZnS QDs (COOH CdSe/ZnS 525, COOH CdSe/ZnS 625, NH2 CdSe/ZnS 525, and NH2 CdSe/ZnS 625) and induced physiological responses in Phanerochaete chrysosporium (P. chrysosporium) through inductively coupled plasma optical emission spectroscopy, confocal laser scanning microscopy, and the determination of malondialdehyde content, superoxide level, superoxide dismutase activity, catalase activity and glutathione level. The results showed that the four CdSe/ZnS QDs accumulated largely in the hyphae and caused oxidative stress to P. chrysosporium in the tested concentration range (10–80 nM). Furthermore, the cellular uptake and cytotoxicity were related to the physicochemical properties of the QDs, such as particle size and surface charges. Negatively charged CdSe/ZnS QDs with small size could be more easily ingested by P. chrysosporium than large ones; thus small size CdSe/ZnS QDs were more cytotoxic to P. chrysosporium. On the other hand, small negatively charged CdSe/ZnS QDs resulted in greater cytotoxicity than large negatively charged CdSe/ZnS QDs. The obtained results offer valuable information for revealing the toxicity mechanism of QDs in living cells.

Transfer of heavy metals from compost to red soil and groundwater under simulated rainfall conditions

It is well known that compost can be polluted with heavy metals. A self-designed soil column system was used to clarify the leaching or residue of heavy metals when compost was added to red soil. Less than 4% of Cu and more than 58.3% of Zn were transferred to groundwater. Maximum concentrations of Cu and Zn in leachate were 22 and 246 microg/L, respectively. pH in leachate decreased during 6.75-11.25 h, comparing with the control. Electrical conductivity was higher in the treatment of compost polluted by both Cu and Zn than that polluted only by Cu. Over 75.3% of Cu and 78.2% of Zn remained in the residual formation. Maximum bioavailability parameters in soil were 0.099 for Cu and 0.160 for Zn. Long-term field experiments with cycling application are needed to study the cycling effect on heavy metal residue in soil or leaching to the groundwater in the future.

Responses of Phanerochaete chrysosporium to Toxic Pollutants: Physiological Flux, Oxidative Stress, and Detoxification

The white-rot fungus Phanerochaete chrysosporium has been widely used for the treatment of waste streams containing heavy metals and toxic organic pollutants. The development of fungal-based treatment technologies requires detailed knowledge of the relationship between bulk water quality and the physiological responses of fungi. A noninvasive microtest technique was used to quantify real-time changes in proton, oxygen, and cadmium ion fluxes following the exposure of P. chrysosporium to environmental toxic (2,4-dichlorophenol and cadmium). Significant changes in H(+) and O(2) flux occurred after exposure to 10 mg/L 2,4-dichlorophenol and 0.1 mM cadmium. Cd(2+) flux decreased with time. Reactive oxygen species formation and antioxidant levels increased after cadmium treatment. Superoxide dismutase activity correlated well with malondialdehyde levels (r(2) = 0.964) at low cadmium concentrations. However, this correlation diminished and malondialdehyde levels significantly increased at the highest cadmium concentration tested. Real-time microscale signatures of H(+), O(2), and Cd(2+) fluxes coupled with oxidative stress analysis can improve our understanding of the physiological responses of P. chrysosporium to toxic pollutants and provide useful information for the development of fungal-based technologies to improve the treatment of wastes cocontaminated with heavy metals and organic pollutants.

Metal-based quantum dots: synthesis, surface modification, transport and fate in aquatic environments and toxicity to microorganisms

Semiconductor quantum dots (QDs) have attracted considerable attention for their superior optical properties and wide utilization in biological and biomedical studies. Recently, intense concerns have been focused on the cytotoxicity assessment of QDs because most QDs are made of heavy metal ions (e.g., Cd2+), which pose a threat to human beings and simultaneously hamper the practical applications of QDs. This review provides an overview of the synthetic methods, surface modification, dissolution mechanism and cytotoxicity of core–shell QDs. Accordingly, the effects of polymer coating materials and environmental conditions on the dissolution kinetics of polymer-coated core–shell QDs are discussed in detail. To offer a systematic analysis of the cytotoxicity of QDs to microorganisms, correlative factors such as particle size, surface coating materials, photolysis and oxidation, charge, concentration, exposure time and mechanical stability are taken into consideration with respect to the mechanism of their toxicity. Future research will concentrate on toxicological and pharmacological studies of QDs to find new strategies with lower risk and higher benefits for public health, providing a unique technique for nanopharmaceutical applications.