Günter Kewes

Enhancement of the zero phonon line emission from a single nitrogen vacancy center in a nanodiamond via coupling to a photonic crystal cavity

Using a nanomanipulation technique a nanodiamond with a single nitrogen vacancy center is placed directly on the surface of a gallium phosphide photonic crystal cavity. A Purcell-enhancement of the fluorescence emission at the zero phonon line (ZPL) by a factor of 12.1 is observed. The ZPL coupling is a first crucial step toward future diamond-based integrated quantum optical devices.

Fiber-Integrated Diamond-Based Single Photon Source

An alignment free, micrometer-scale single photon source consisting of a single quantum emitter on an optical fiber operating at room temperature is demonstrated. It easily integrates into fiber optic networks for quantum cryptography or quantum metrology applications.(1) Near-field coupling of a single nitrogen-vacancy center is achieved in a bottom-up approach by placing a preselected nanodiamond directly on the fiber facet. Its high photon collection efficiency is equivalent to a far-field collection via an objective with a numerical aperture of 0.82. Furthermore, simultaneous excitation and re-collection through the fiber is possible by introducing a fiber-connected single emitter sensor.

Single defect centers in diamond nanocrystals as quantum probes for plasmonic nanostructures

We present two applications of a single nitrogen vacancy center in a nanodiamond as quantum probe for plasmonic nanostructures. Coupling to the nanostructures is achieved in a highly controlled manner by picking up a pre-characterized nanocrystal with an atomic force microscope and placing it at the desired position. Local launching of single excitations into a nanowire with a spatial control of few nanometers is demonstrated. Further, a two dimensional map of the electromagnetic environment of a plasmonic bowtie antenna was derived, resembling an ultimate limit of fluorescence lifetime nanoscopy.

A scanning probe-based pick-and-place procedure for assembly of integrated quantum optical hybrid devices.

Integrated quantum optical hybrid devices consist of fundamental constituents such as single emitters and tailored photonic nanostructures. A reliable fabrication method requires the controlled deposition of active nanoparticles on arbitrary nanostructures with highest precision. Here, we describe an easily adaptable technique that employs picking and placing of nanoparticles with an atomic force microscope combined with a confocal setup. In this way, both the topography and the optical response can be monitored simultaneously before and after the assembly. The technique can be applied to arbitrary particles. Here, we focus on nanodiamonds containing single nitrogen vacancy centers, which are particularly interesting for quantum optical experiments on the single photon and single emitter level.

Investigation of Line Width Narrowing and Spectral Jumps of Single Stable Defect Centers in ZnO at Cryogenic Temperature.

Finding new solid state defect centers in novel host materials is crucial for realizing integrated hybrid quantum photonic devices. We present a preparation method for defect centers with photostable bright single photon emission in zinc oxide, a material with promising properties in terms of processability, availability, and applications. A detailed optical study reveals a complex dynamic of intensity fluctuations at room temperature. Measurements at cryogenic temperatures show very sharp (<60 GHz) zero phonon lines (ZPLs) at 580 nm to  620 nm (≈ 2.0 eV) with frozen out fast fluctuations. Remaining discrete jumps of the ZPL, which depend on the excitation power, are observed. The low temperature results will narrow down speculations on the origin of visible-near-infrared (NIR) wavelength defect emission in zinc oxide and provide a basis for improved theoretical models.

A realistic fabrication and design concept for quantum gates based on single emitters integrated in plasmonic-dielectric waveguide structures.

Tremendous enhancement of light-matter interaction in plasmonic-dielectric hybrid devices allows for non-linearities at the level of single emitters and few photons, such as single photon transistors. However, constructing integrated components for such devices is technologically extremely challenging. We tackle this task by lithographically fabricating an on-chip plasmonic waveguide-structure connected to far-field in- and out-coupling ports via low-loss dielectric waveguides. We precisely describe our lithographic approach and characterize the fabricated integrated chip. We find excellent agreement with rigorous numerical simulations. Based on these findings we perform a numerical optimization and calculate concrete numbers for a plasmonic single-photon transistor.

Design and numerical optimization of an easy-to-fabricate photon-to-plasmon coupler for quantum plasmonics

We design an on-chip single mode photon to surface-plasmon coupler. Our coupler consists of a tapered dielectric waveguide and a V-shaped plasmonic part. In contrast to other concepts designated to minimized-loss coupling into long-ranging waveguides, we focus on an easy-to-fabricate structure working in the visible spectral range. The air-cladded design provides full experimental access to the evanescent fields emerging from the plasmonic stripe guide. An adaptive finite element method for full three dimensional simulations is used combined with the Taguchi method for optimization, which makes our procedure extremely time-efficient and executable on standard personal computers.

Limitations of Particle-Based Spasers

We present a semiclassical analytic model for spherical core-shell surface plasmon lasers. Within this model, we drop the widely used one-mode approximations in favor of fully electromagnetic Mie theory. This allows for incorporation of realistic gain relaxation rates that so far are massively underestimated. Especially, higher order modes can undermine and even reverse the beneficial effects of the strong Purcell effect in such systems. Our model gives a clear view on gain and resonator requirements, as well as on the output characteristics that will help experimenters to design more efficient particle-based spasers.

Micro-concave waveguide antenna for high photon extraction from nitrogen vacancy centers in nanodiamond

The negatively charged nitrogen-vacancy colour center (NV− center) in nanodiamond is an excellent single photon source due to its stable photon generation in ambient conditions, optically addressable nuclear spin state, high quantum yield and its availability in nanometer sized crystals. In order to make practical devices using nanodiamond, highly efficient and directional emission of single photons in well-defined modes, either collimated into free space or waveguides are essential. This is a Herculean task as the photoluminescence of the NV centers is associated with two orthogonal dipoles arranged in a plane perpendicular to the NV defect symmetry axis. Here, we report on a micro-concave waveguide antenna design, which can effectively direct single photons from any emitter into either free space or into waveguides in a narrow cone angle with more than 80% collection efficiency irrespective of the dipole orientation. The device also enhances the spontaneous emission rate which further increases the number of photons available for collection. The waveguide antenna has potential applications in quantum cryptography, quantum computation, spectroscopy and metrology.

Detecting single photon signals with mirror-enhanced grating couplers (Conference Presentation)

We employ mirror enhanced grating couplers as convenient output ports for ridge Si3N4 waveguide to detect single photons emitted from Dibenzoterrylene (DBT) molecules coupled into propagating modes at room temperature. The coupling ports are designed for waveguide structures on transparent silica substrates for light extraction from the chip backside. Thus the coupling ports enable contact free readout of the waveguide devices by imaging through the silica substrate. Optimized grating structures provide maximum out-coupling efficiency at 785nm (the central emission wavelength of DBT) with a bandwidth of 50 nm and fulfill mode-matching to a Gaussian mode in free space (FWHM ≈ 4μm). Covering fully etched grating devices with a Hydrogen silsesquioxane buffer layer and a gold mirror increase the coupling efficiency compared to bare grating structures. The maximum single coupler efficiency predicted by finite element simulations is 90% which reduces to 60% when adapted to fabrication constrains, whereas the average measured coupling efficiency is 35±5%. We employ such grating ports to read out optical waveguides designed for single-mode operation at λ=785 nm. DBT molecules are coupled evanescently to the waveguides and transport emitted single photon signals to the coupling region upon optical pumping. Using a Hanbury Brown and Twiss setup we observe pronounced antibunching with g(2)(0)=0.50±0.05 from the grating couplers by excitation (λ=767nm) of a single DBT molecule which confirms the quantum nature of the outcoupled fluorescent light.