Günther Rupprechter

The application of infrared spectroscopy to probe the surface morphology of alumina-supported palladium catalysts

Five alumina-supported palladium catalysts have been prepared from a range of precursor compounds [palladium(II) nitrate, palladium(II) chloride, palladium(II) acetylacetonate, and tetraamminepalladium(II) tetraazidopalladate(II)] and at different metal loadings (1-7.3 wt %). Collectively, this series of catalysts provides a range of metal particle sizes (1.2-8.5 nm) that emphasize different morphological aspects of the palladium crystallites. The infrared spectra of chemisorbed CO applied under pulse-flow conditions reveal distinct groupings between metal crystallites dominated by low index planes and those that feature predominantly corner/edge atoms. Temperature-programmed infrared spectroscopy establishes that the linear CO band can be resolved into contributions from corner atoms and a combination of (111)(111) and (111)(100) particle edges. Propene hydrogenation has been used as a preliminary assessment of catalytic performance for the 1 wt % loaded catalysts, with the relative inactivity of the catalyst prepared from palladium(II) chloride attributed to a diminished hydrogen supply due to decoration of edge sites by chlorine originating from the preparative process. It is anticipated that refinements linking the vibrational spectrum of a probe molecule with surface structure and accessible adsorption sites for such a versatile catalytic substrate provide a platform against which structure/reactivity relationships can be usefully developed.

Preparation and characterization of model catalysts: from ultrahigh vacuum to in situ conditions at the atomic dimension

Abstract In situ characterization and reaction studies of working catalytic systems are an issue of current interest. We present studies on well characterized model systems, i.e., deposited metal nanoparticles, applying a variety of experimental techniques in an attempt to bridge gaps between surface science and catalysis. In particular, we investigate methanol dehydrogenation and ethene hydrogenation under UHV as well as ambient conditions and apply nonlinear optical techniques. We use electron spin resonance to study intermediately formed radicals in Ziegler–Natta polymerization of ethene. It is concluded that there is a chance to transfer results from studies on model systems toward an understanding of catalysis.

How to Control the Selectivity of Palladium-based Catalysts in Hydrogenation Reactions: The Role of Subsurface Chemistry

Discussed are the recent experimental and theoretical results on palladium‐based catalysts for selective hydrogenation of alkynes obtained by a number of collaborating groups in a joint multi‐method and multi‐material approach. The critical modification of catalytically active Pd surfaces by incorporation of foreign species X into the sub‐surface of Pd metal was observed by in situ spectroscopy for X=H, C under hydrogenation conditions. Under certain conditions (low H2 partial pressure) alkyne fragmentation leads to formation of a PdC surface phase in the reactant gas feed. The insertion of C as a modifier species in the sub‐surface increases considerably the selectivity of alkyne semi‐hydrogenation over Pd‐based catalysts through the decoupling of bulk hydrogen from the outmost active surface layer. DFT calculations confirm that PdC hinders the diffusion of hydridic hydrogen. Its formation is dependent on the chemical potential of carbon (reactant partial pressure) and is suppressed when the hydrogen/alkyne pressure ratio is high, which leads to rather unselective hydrogenation over in situ formed bulk PdH. The beneficial effect of the modifier species X on the selectivity, however, is also present in intermetallic compounds with X=Ga. As a great advantage, such PdxGay catalysts show extended stability under in situ conditions. Metallurgical, clean samples were used to determine the intrinsic catalytic properties of PdGa and Pd3Ga7. For high performance catalysts, supported nanostructured intermetallic compounds are more preferable and partial reduction of Ga2O3, upon heating of Pd/Ga2O3 in hydrogen, was shown to lead to formation of PdGa intermetallic compounds at moderate temperatures. In this way, Pd5Ga2 and Pd2Ga are accessible in the form of supported nanoparticles, in thin film models, and realistic powder samples, respectively.

Studies of metal–support interactions with “real” and “inverted” model systems: reactions of CO and small hydrocarbons with hydrogen on noble metals in contact with oxides

Two types of model catalysts are compared: thin film catalysts consisting of polyhedral noble metal nanocrystals (Rh and Pt) supported by reducible and non‐reducible oxides, and their inverted pendants, submonolayers of titania and vanadia deposited under UHV conditions on the respective metal surfaces (Pd and Rh(111) and Rh (polycrystalline)). The structure and composition of the inverse catalysts were examined in situ by LEED and AES and the nanoparticles were characterized by HRTEM. The activity of thin film and inverse catalysts was studied in a series of reactions, such as the ring opening of methylcyclopentane and methylcyclobutane, the dissociation of CO and the CO methanation. Reaction conditions comprise atmospheric pressure but also molecular beam experiments. The reaction rates are related to the oxidation state of the supporting oxide, to the free metal surface area and to the number of sites at the interface between metal and support.

Bridging the pressure and materials gaps between catalysis and surface science: clean and modified oxide surfaces.

The preparation of model systems based on thin epitaxial oxide films and oxide single crystals is discussed. A variety of surface sensitive techniques has been applied to study the geometric and electronic properties of these systems. The findings are correlated with adsorption and reaction of probe molecules on the surfaces. Metal vapor deposition under controlled conditions leads to the formation of metal aggregates with narrow size distributions. Their properties have been characterized, establishing that we can begin to bridge the materials gap between catalysis and surface science. While mainly performed under UHV conditions, adsorption measurements can be pushed to ambient conditions using non-linear optical techniques such as sum frequency generation. Results for systems with deposited metal aggregates will be discussed.

Comparison of the reactivity of different Pd-O species in CO oxidation.

The reactivity of several Pd-O species toward CO oxidation was compared experimentally, making use of chemically, structurally and morphologically different model systems such as single-crystalline Pd(111) covered by adsorbed oxygen or a Pd(5)O(4) surface oxide layer, an oriented Pd(111) thin film on NiAl oxidized toward PdO(x) suboxide and silica-supported uniform Pd nanoparticles oxidized to PdO. The oxygen reactivity decreased with increasing oxidation state: O(ad) on metallic Pd(111) exhibited the highest reactivity and could be reduced within a few minutes already at 223 K, using low CO beam fluxes around 0.02 ML s(-1). The Pd(5)O(4) surface oxide on Pd(111) could be reacted by CO at a comparable rate above 330 K using the same low CO beam flux. The more deeply oxidized Pd(111) thin film supported on NiAl was already much less reactive, and reduction in 10(-6) mbar CO at T > 500 K led only to partial reduction toward PdO(x) suboxide, and the metallic state of Pd could not be re-established under these conditions. The fully oxidized PdO nanoparticles required even rougher reaction conditions such as 10 mbar CO for 15 min at 523 K in order to re-establish the metallic state. As a general explanation for the observed activity trends we propose kinetic long-range transport limitations for the formation of an extended, crystalline metal phase. These mass-transport limitations are not involved in the reduction of O(ad), and less demanding in case of the 2-D Pd(5)O(4) surface oxide conversion back to metallic Pd(111). They presumably become rate-limiting in the complex separation process from an extended 3-D bulk oxide state toward a well ordered 3-D metallic phase.

Ultrahigh vacuum and high-pressure coadsorption of CO and H2 on Pd(111): A combined SFG, TDS, and LEED study

Sum frequency generation (SFG) vibrational spectroscopy was carried out in conjunction with thermal desorption spectroscopy, low-energy electron diffraction, and Auger electron spectroscopy to examine the coadsorption of CO and H2 on Pd(111). Sequential dosing as well as various CO/H2 mixtures was utilized to study intermolecular interactions between CO and H2. Preadsorbed CO effectively prevented the dissociative adsorption of hydrogen for CO coverages ⩾0.33 ML. While preadsorbed hydrogen was able to hinder CO adsorption at low temperature (100 K), hydrogen was replaced from the surface by CO at 150 K. When 1:1 mixtures of CO/H2 were used at 100 K, hydrogen selectively hindered CO adsorption on on-top sites, while above ∼125 K no blocking of CO adsorption was observed. The observations are explained in terms of mutual site blocking, of a CO–H phase separation, and of a CO-assisted hydrogen dissolution in the Pd bulk. The temperature-dependent site blocking effect of hydrogen is attributed to the ability ...

Epitaxially grown model catalyst particles of platinum, rhodium, iridium, palladium and rhenium studied by electron microscopy

In order to obtain oriented thin film model catalysts, small particles of Pt, Rh, Ir, Pd and Re (2–20 nm in size) were grown by high vacuum evaporation on NaCl cleavage faces or on in situ deposited NaCl films at 523–673 K. The particles were covered with a supporting film of Al2O3 or carbon and removed from the substrate. High resolution electron microscopy, selected area electron diffraction and weak-beam dark-field imaging were applied to determine the particular morphology, microstructure and orientation of the observed particles. Special attention was paid to Rh particles which appear in a variety of shapes. Pt, Ir and Pd model catalysts consist mainly of (001) oriented half octahedra which may exhibit truncations at the corners or on the top. This was also the dominant shape of Rh particles but in addition half tetrahedra in (011) epitaxy and multiply-twinned particles like decahedra in (001), (011) and (111) orientation were evident. These habits provide a definite “initial state” for study of the changes in structure and morphology of the particles during activating heat treatments necessary to induce catalytic activity of the Al2O3 supported metal films. Although Re films consisted of irregularly shaped particles, electron diffraction revealed a partial epitaxial alignment of both c.p.h. and f.c.c. Re.

Adsorption and reaction of methanol on supported palladium catalysts: microscopic-level studies from ultrahigh vacuum to ambient pressure conditions

We investigated the decomposition and (partial) oxidation of methanol on Pd based catalysts in an integrated attempt, simultaneously bridging both the pressure and the materials gap. Combined studies were performed on well-defined Pd model catalysts based on ordered Al(2)O(3) and Fe(3)O(4) thin films, on well-defined particles supported on powders and on Pd single crystals. The interaction of Pd nanoparticles and Pd(111) with CH(3)OH and CH(3)OH/O(2) mixtures was examined from ultrahigh vacuum conditions up to ambient pressures, utilizing a broad range of surface specific vibrational spectroscopies which included IRAS, TR-IRAS, PM-IRAS, SFG, and DRIFTS. Detailed kinetic studies in the low pressure region were performed by molecular beam methods, providing comprehensive insights into the microkinetics of the reaction system. The underlying microscopic processes were studied theoretically on the basis of specially designed 3-D nanocluster models containing approximately 10(2) metal atoms. The efficiency of this novel modelling approach was demonstrated by rationalizing and complementing pertinent experimental results. In order to connect these results to the behavior under ambient conditions, kinetic and spectroscopic investigations were performed in reaction cells and lab reactors. Specifically, we focused on (1) particle size and structure dependent effects in methanol oxidation and decomposition, (2) support effects and their relation to activity and selectivity, (3) the influence of poisons such as carbon, and (4) the role of oxide and surface oxide formation on Pd nanoparticles.

CO adsorption on Ni(100) and Pt(111) studied by infrared–visible sum frequency generation spectroscopy: design and application of an SFG-compatible UHV–high-pressure reaction cell

Infrared–visible sum frequency generation (SFG) surface vibrational spectroscopy was applied to monitor CO stretching vibrations on Ni(100) and Pt(111) in the range from submonolayer coverages up to 200 mbar. Since SFG can operate in a pressure range from ultrahigh vacuum (UHV) to ambient conditions, it is particularly suited for in situ studies of adsorbates at elevated pressure or during a catalytic reaction. At high coverages, a compressed overlayer was formed on Ni(100) at 100 K that can be modeled by a coincidence structure. On Pt(111), terminally bonded (on-top) CO was the only species observed at 230 K, independent of gas pressure. At low pressure the SFG spectra were complemented by LEED, AES and TPD. The experiments were carried out in an SFG-compatible elevated pressure reactor that is attached to a UHV surface analysis chamber. After preparation and characterization in UHV, model catalysts can be transferred in vacuo into the reaction cell. The reactor is separated from the UHV chamber by an arrangement of differentially pumped spring-loaded teflon seals and can be pressurized to 1 bar without degrading the vacuum in the UHV analysis system.