Guohao Dai

Integration of flow-dependent endothelial phenotypes by Kruppel-like factor 2

In the face of systemic risk factors, certain regions of the arterial vasculature remain relatively resistant to the development of atherosclerotic lesions. The biomechanically distinct environments in these arterial geometries exert a protective influence via certain key functions of the endothelial lining; however, the mechanisms underlying the coordinated regulation of specific mechano-activated transcriptional programs leading to distinct endothelial functional phenotypes have remained elusive. Here, we show that the transcription factor Kruppel-like factor 2 (KLF2) is selectively induced in endothelial cells exposed to a biomechanical stimulus characteristic of atheroprotected regions of the human carotid and that this flow-mediated increase in expression occurs via a MEK5/ERK5/MEF2 signaling pathway. Overexpression and silencing of KLF2 in the context of flow, combined with findings from genome-wide analyses of gene expression, demonstrate that the induction of KLF2 results in the orchestrated regulation of endothelial transcriptional programs controlling inflammation, thrombosis/hemostasis, vascular tone, and blood vessel development. Our data also indicate that KLF2 expression globally modulates IL-1beta-mediated endothelial activation. KLF2 therefore serves as a mechano-activated transcription factor important in the integration of multiple endothelial functions associated with regions of the arterial vasculature that are relatively resistant to atherogenesis.

Mechanotransduction through growth-factor shedding into the extracellular space.

Physical forces elicit biochemical signalling in a diverse array of cells, tissues and organisms, helping to govern fundamental biological processes. Several hypotheses have been advanced that link physical forces to intracellular signalling pathways, but in many cases the molecular mechanisms of mechanotransduction remain elusive. Here we find that compressive stress shrinks the lateral intercellular space surrounding epithelial cells, and triggers cellular signalling via autocrine binding of epidermal growth factor family ligands to the epidermal growth factor receptor. Mathematical analysis predicts that constant rate shedding of autocrine ligands into a collapsing lateral intercellular space leads to increased local ligand concentrations that are sufficient to account for the observed receptor signalling; direct experimental comparison of signalling stimulated by compressive stress versus exogenous soluble ligand supports this prediction. These findings establish a mechanism by which mechanotransduction arises from an autocrine ligand–receptor circuit operating in a dynamically regulated extracellular volume, not requiring induction of force-dependent biochemical processes within the cell or cell membrane.

Bio-printing of collagen and VEGF-releasing fibrin gel scaffolds for neural stem cell culture

Time-released delivery of soluble growth factors (GFs) in engineered hydrogel tissue constructs promotes the migration and proliferation of embedded cells, which is an important factor for designing scaffolds that ultimately aim for neural tissue regeneration. We report a tissue engineering technique to print murine neural stem cells (C17.2), collagen hydrogel, and GF (vascular endothelial growth factor: VEGF)-releasing fibrin gel to construct an artificial neural tissue. We examined the morphological changes of the printed C17.2 cells embedded in the collagen and its migration toward the fibrin gel. The cells showed high viability (92.89+/-2.32%) after printing, which was equivalent to that of manually-plated cells. C17.2 cells printed within 1mm from the border of VEGF-releasing fibrin gel showed GF-induced changes in their morphology. The cells printed in this range also migrated toward the fibrin gel, with the total migration distance of 102.4+/-76.1microm over 3days. The cells in the control samples (fibrin without the VEGF or VEGF printed directly in collagen) neither proliferated nor migrated. The results demonstrated that bio-printing of VEGF-containing fibrin gel supported sustained release of the GF in the collagen scaffold. The presented method can be gainfully used in the development of three-dimensional (3D) artificial tissue assays and neural tissue regeneration applications.

The integration of 3-D cell printing and mesoscopic fluorescence molecular tomography of vascular constructs within thick hydrogel scaffolds

Developing methods that provide adequate vascular perfusion is an important step toward engineering large functional tissues. Meanwhile, an imaging modality to assess the three-dimensional (3-D) structures and functions of the vascular channels is lacking for thick matrices (>2 ≈ 3 mm). Herein, we report on an original approach to construct and image 3-D dynamically perfused vascular structures in thick hydrogel scaffolds. In this work, we integrated a robotic 3-D cell printing technology with a mesoscopic fluorescence molecular tomography imaging system, and demonstrated the capability of the platform to construct perfused collagen scaffolds with endothelial lining and to image both the fluid flow and fluorescent-labeled living endothelial cells at high-frame rates, with high sensitivity and accuracy. These results establish the potential of integrating both 3-D cell printing and fluorescence mesoscopic imaging for functional and molecular studies in complex tissue-engineered tissues.

The effects of external compression on venous blood flow and tissue deformation in the lower leg.

External pneumatic compression of the lower legs is effective as prophylaxis against deep vein thrombosis. In a typical application, inflatable cuffs are wrapped around the patients legs and periodically inflated to prevent stasis, accelerate venous blood flow, and enhance fibrinolysis. The purpose of this study was to examine the stress distribution within the tissues, and the corresponding venous blood flow and intravascular shear stress with different external compression modalities. A two-dimensional finite element analysis (FEA) was used to determine venous collapse as a function of internal (venous) pressure and the magnitude and spatial distribution of external (surface) pressure. Using the one-dimensional equations governing flow in a collapsible tube and the relations for venous collapse from the FEA, blood flow resulting from external compression was simulated. Tests were conducted to compare circumferentially symmetric (C) and asymmetric (A) compression and to examine distributions of pressure along the limb. Results show that A compression produces greater vessel collapse and generates larger blood flow velocities and shear stresses than C compression. The differences between axially uniform and graded-sequential compression are less marked than previously found, with uniform compression providing slightly greater peak flow velocities and shear stresses. The major advantage of graded-sequential compression is found at midcalf. Strains at the lumenal border are approximately 20 percent at an external pressure of 50 mmHg (6650 Pa) with all compression modalities.

Mesoscopic fluorescence molecular tomography of reporter genes in bioprinted thick tissue

Abstract. Three-dimensional imaging of thick tissue constructs is one of the main challenges in the field of tissue engineering and regenerative medicine. Optical methods are the most promising as they offer noninvasive, fast, and inexpensive solutions. Herein, we report the use of mesoscopic fluorescence molecular tomography (MFMT) to image function and structure of thick bioprinted tissue hosted in a 3-mm-thick bioreactor. Collagen-based tissue assembled in this study contains two vascular channels formed by green fluorescent protein- and mCherry-expressing cells. Transfected live cell imaging enables us to image function, whereas Flash Red fluorescent bead perfusion into the vascular channel allows us to image structure. The MFMT optical reconstructions are benchmarked with classical microscopy techniques. MFMT and wide-field fluorescence microscopy data match within 92% in area and 84% in location, validating the accuracy of MFMT reconstructions. Our results demonstrate that MFMT is a well-suited imaging modality for fast, longitudinal, functional imaging of thick, and turbid tissue engineering constructs.

Printing of Three-Dimensional Tissue Analogs for Regenerative Medicine

Three-dimensional (3-D) cell printing, which can accurately deposit cells, biomaterial scaffolds and growth factors in precisely defined spatial patterns to form biomimetic tissue structures, has emerged as a powerful enabling technology to create live tissue and organ structures for drug discovery and tissue engineering applications. Unlike traditional 3-D printing that uses metals, plastics and polymers as the printing materials, cell printing has to be compatible with living cells and biological matrix. It is also required that the printing process preserves the biological functions of the cells and extracellular matrix, and to mimic the cell–matrix architectures and mechanical properties of the native tissues. Therefore, there are significant challenges in order to translate the technologies of traditional 3-D printing to cell printing, and ultimately achieve functional outcomes in the printed tissues. So it is essential to develop new technologies specially designed for cell printing and in-depth basic research in the bioprinted tissues, such as developing novel biomaterials specifically for cell printing applications, understanding the complex cell–matrix remodeling for the desired mechanical properties and functional outcomes, establishing proper vascular perfusion in bioprinted tissues, etc. In recent years, many exciting research progresses have been made in the 3-D cell printing technology and its application in engineering live tissue constructs. This review paper summarized the current development in 3-D cell printing technologies; focus on the outcomes of the live printed tissues and their potential applications in drug discovery and regenerative medicine. Current challenges and limitations are highlighted, and future directions of 3-D cell printing technology are also discussed.

Venous Endothelial Marker COUP-TFII Regulates the Distinct Pathologic Potentials of Adult Arteries and Veins

Arteries and veins have very different susceptibility to certain vascular diseases such as atherosclerosis and vascular calcification. The molecular mechanisms of these differences are not fully understood. In this study, we discovered that COUP-TFII, a transcription factor critical for establishing the venous identity during embryonic vascular development, also regulates the pathophysiological functions of adult blood vessels, especially those directly related to vascular diseases. Specifically, we found that suppression of COUP-TFII in venous ECs switched its phenotype toward pro-atherogenic by up-regulating the expression of inflammatory genes and down-regulating anti-thrombotic genes. ECs with COUP-TFII knockdown also readily undergo endothelial-to-mesenchymal transition (EndoMT) and subsequent osteogenic differentiation with dramatically increased osteogenic transcriptional program and calcium deposition. Consistently, over-expression of COUP-TFII led to the completely opposite effects. In vivo validation of these pro-atherogenic and osteogenic genes also demonstrates a broad consistent differential expression pattern in mouse aorta vs. vena cava ECs, which cannot be explained by the difference in hemodynamic flow. These data reveal phenotypic modulation by different levels of COUP-TFII in arterial and venous ECs, and suggest COUP-TFII may play an important role in the different susceptibilities of arteries and veins to vascular diseases such as atherosclerosis and vascular calcification.

3D Bioprinting and 3D Imaging for Stem Cell Engineering

Three-dimensional (3D) bio-printing, a technology to create 3D tissue through layer-by-layer approach, offers great capacity to engineer tissue with desired cells, growth factors and biomaterial scaffolds in spatial patterns to mimic the native tissue architecture. With its flexibility and power, the 3D bio-printing technology can also be used to control stem cell fate and creating 3D stem cell niches. Meanwhile, 3D bio-printed tissues often incorporate thick opaque scaffold, dense population of cells, and are often large in size (1–100 mm). Thus, there are significant difficulties in visualizing the biological events within thick tissue constructs using current microscopic techniques. To elucidate the interaction of stem cells with the microenvironment in tissue engineering applications, it is necessary to develop novel molecular imaging techniques to non-invasively observe stem cell fate, cell-cell interactions, and structural features of an engineered tissue in real time. In this chapter, we review the usage of bio-printing technologies in stem cell and tissue engineering application, and the most recent development in the optical molecular imaging techniques for thick tissue imaging.

Generation of 3-D glioblastoma-vascular niche using 3-D bioprinting

Glioblastoma multiforme (GBM), a malignant brain tumor, frequently exploit microvessels as guides for migration. Understanding cell-cell interaction between vascular cells and GBM cells may suggest a new therapeutic direction. We developed physiological 3-D glioma-vascular niche model to investigate this cell-cell interaction using 3-D bioprinting technology. In the model, patient-derived GBM cell cluster was closely located to fluidic vessel. The influence of microenvironmental factors (matrix composition) has been tested in order to provide better control on 3-D cell behavior in future research. The 3D vascular niche platform can be adapted to other biological systems and will be used as a valuable tool to model cell-cell interactions and to control microenvironment in other systems.