Guohong Li

Normal-state transport properties of YBa2Cu3O7- delta /PrBa2Cu3O7- delta superlattices.

This work measures the resistivity and Hall coefficient R{sub H} for a series of YBa{sub 2}Cu{sub 3}O{sub 7{minus}y}/PrBa{sub 2}Cu{sub 3}O{sub 7{minus}y} (YBCO/PBCO) superlattices. The Hall coefficient R{sub H} systematically varies with different thicknesses of YBCO or PBCO layers. The Hall number decreases with a decreasing thickness of YBCO layers or increasing thickness of PBCO layers. We investigate the temperature dependence of the Hall angle in YBCO/PBCO superlattices as well. The cotangent Hall angle is also observed to follow a universal T{sup 2} dependence in all superlattices, i.e., cot{theta}{sub H}={alpha}T{sup 2}+C where both {alpha} and C change with the layer thickness. From the results presented herein, we believe that the reduction in carrier density, caused by the magnetic scattering effects and hole filling which occur near the interface, leads to the depression of T{sub c} in the YBCO/PBCO superlattice. {copyright} {ital 1997} {ital The American Physical Society}

Effect of non-uniform magnetic field produced by Sn film in intermediate state on weak localization

Weak localization magnetoresistance (MR) of a thin Ag film was measured in non-uniform magnetic field created by a superconducting Sn film in intermediate state. MR less than that in uniform field was observed, which is in contrary to the reported MR behavior in the case where the non-uniform field was produced by a superconductor in mixed state. However, the approximately linear behavior of the MR field dependence is in common. The result is discussed based on the different field non-uniformity between intermediate and mixed states. In addition, the detailed structure of the MR indicates a step-like change of the normal domains in intermediate state.

Study of 1f noise in the normal state of YBa2Cu3O7/PrBa2Cu3O7 superlattice

Abstract We have studied the 1 f noise behavior of an YBa2Cu3O7/PrBa2Cu3O7 superlattice sample in the normal state, and, measured, for comparison, the 1/f noise power of an YBa2Cu3O7 film and PrBa2Cu3O7 film. The noise power of superlattice sample is about 2 order of magnitude lower than that of YBa2Cu3O7 film, close to the reported noise level in YBa2Cu3O7 single crystal. The results are analysed by a simplified parallel noise sources model. The high level of 1 f noise in PrBa2Cu3O7 film prefers an origin of incipient localization for copper-oxide superconductors in the normal state.

Distribution of flux pinning energies in Powder-Melt-Textured-Grown YBa2Cu3O7−δ

Abstract Flux pinning energies and their distributions at 77 K in a Powder-Melt-Textured-Grown YBa 2 Cu 3 O 7−δ sample have been determined by 90° rotating sample magnetic measurements. These measurements are done in three different configurations in which the relative orientations between the trapped flux and the depinning fields vary. Four kinds of peaks are found in the distribution curves. Besides the core pinning with energy of 0.2–0.3 eV, the results suggest the existence of magnetic pinning due to the energy decrease of both the core and the surrounding supercurrents of a flux line. Twin boundaries show the strongest pinning. Interactions between flux lines might have make an additional contribution.

Resistivity and thermoelectric power of YBa2Cu3O7−δPrBa2Cu3O7−δ superlattice with 2-unit-cell-thick YBa2Cu3O7−δ layer in one period

Abstract Measurements of the resistivity and thermoelectric power (TEP) for a series of YBa 2 Cu 3 O 7−δ PrBa 2 Cu 3 O 7−δ ( YBCO PrBCO ) superlattice samples with 2-unit-cell-thick YBCO layer and 2, 4, 6 or 8-unit-cell-thick PrBCO layer in one period are reported. For the sample with 2-unit-cell-thick PrBCO layers, the resistivity of the YBCO layers is larger than that of bulk YBCO samples. The contribution of stoichiometric diffusion and interface scattering is estimated. Its TEP is positive with positive temperature coefficient, different from the typical negative one in bulk YBCO samples with positive TEP values. The property of the YBCO layers changes with increasing thickness of the PrBCO layers. For the sample with 8-unit-cell-thick PrBCO layers, the contribution of the PrBCO layers has to be considered.

Thermoelectric power and 1/f noise in the normal state of YBa2Cu3O7−δ/PrBa2Cu3O7−δ superlattice

Abstract The thermoelectric power (TEP) and 1/f noise of a series of YBa 2 Cu 3 O 7−δ /PrBa 2 Cu 3 O 7−δ (YBCO/PrBCO) superlattice samples have been measured from 80K to 270K. The TEP of the superlattices has large and positive values. For samples with thick YBCO layers, it varies linearly with temperature and has a positive slope. The noise power of superlattices samples is about two orders of magnitude lower than that in bulk YBCO film.

Thermoelectric power in Gd1.85−xPrxCe0.15CuO4 system☆

Abstract Thermoelectric power measurements are reported for samples with different x in the Gd 1.85−x Pr x Ce 0.15 CuO 4 system for temperature ranging from 80K to 300K. For Pr-rich superconducting samples, thermoelectric power S has a small negative value and is almost temperature independent. It supports the existence of mid-gap states with Fermi level close to the minimum of the density of states. For Gd-rich non-superconducting samples, Cu ions have antiferromagnetic ordering and their behavior of S is close to that of p-type impurity semiconductor.

A method to determine the distribution of pinning energies: 90° rotating sample magnetic measurement☆

Abstract 90° rotating sample magnetic measurement, a method to determine the distribution of flux pinning energies in high temperature superconductors is described. As an example, the results for superconducting Bi 2−x Pb x Sr 2 Ca 2 Cu 3 O y with x=0.3, 0.4 and 0.5 at 77K are given. There are mainly three kinds of pinning with pinning energies of 0.01eV, 0.08∼0.09eV and 0.3eV, respectively.

Study of pinning energies in silver‐sheathed bismuth superconducting tape by 90° rotating sample magnetic measurements

Flux pinning energies and their distributions at 77 K in silver‐sheathed and highly c‐axis‐oriented Bi2223 superconducting tape with a nominal composition of Bi1.8Pb0.4Sr2Ca2.2Cu3Oy have been determined by 90° rotating sample magnetic measurements. These measurements are done in three different configurations in which the relative orientations between the trapped flux and the depinning fields vary. Three peaks, located at 0.09–0.1 eV, 0.3–0.6 eV, and 1.4 eV, respectively, are found in the distribution curves. The relation between the peaks and pinning mechanisms as pinning of a single kink, kink formation, and intrinsic pinning is discussed.