Guosong Wu

Enhanced antimicrobial properties, cytocompatibility, and corrosion resistance of plasma-modified biodegradable magnesium alloys.

Magnesium alloys are potential biodegradable materials and have received increasing attention due to their outstanding biological performance and mechanical properties. However, rapid degradation in the physiological environment and potential toxicity limit clinical applications. Recently, special magnesium-calcium (Mg-Ca) and magnesium-strontium (Mg-Sr) alloys with biocompatible chemical compositions have been reported, but the rapid degradation still does not meet clinical requirements. In order to improve the corrosion resistance, a rough, hydrophobic and ZrO(2)-containing surface film is fabricated on Mg-Ca and Mg-Sr alloys by dual zirconium and oxygen ion implantation. Weight loss measurements and electrochemical corrosion tests show that the corrosion rate of the Mg-Ca and Mg-Sr alloys is reduced appreciably after surface treatment. A systematic investigation of the in vitro cellular response and antibacterial capability of the modified binary magnesium alloys is performed. The amounts of adherent bacteria on the Zr-O-implanted and Zr-implanted samples diminish remarkably compared to the unimplanted control. In addition, significantly enhanced cell adhesion and proliferation are observed from the Zr-O-implanted sample. The results suggest that dual zirconium and oxygen ion implantation, which effectively enhances the corrosion resistance, in vitro biocompatibility and antimicrobial properties of Mg-Ca and Mg-Sr alloys, provides a simple and practical means to expedite clinical acceptance of biodegradable magnesium alloys.

Plasma-Modified Biomaterials for Self-Antimicrobial Applications

The surface compatibility and antibacterial properties of biomaterials are crucial to tissue engineering and other medical applications, and plasma-assisted technologies have been employed to enhance these characteristics with good success. Herein, we describe and review the recent developments made by our interdisciplinary team on self-antimicrobial biomaterials with emphasis on plasma-based surface modification. Our results indicate that a self-antibacterial surface can be produced on various types of materials including polymers, metals, and ceramics by plasma treatment. Surface characteristics such as roughness, microstructure, chemistry, electronegativity, free energy, hydrophilicity, and interfacial physiochemistry are important factors and can be tailored by using the appropriate plasma-assisted processing parameters. In particular, mechanistic studies reveal that the interfacial physiochemical processes, biocidal agents, and surface free energy are predominantly responsible for the antibacterial effects of plasma-modified biomaterials.

Engineering and functionalization of biomaterials via surface modification

It is imperative to control the interactions between biomaterials and living tissues to optimize their therapeutic effects and disease diagnostics. Because most biomaterials do not have the perfect surface properties and desirable functions, surface modification plays an important role in tailoring the surface of biomaterials to allow better adaptation to the physiological surroundings and deliver the required clinical performance. This paper reviews recent progress pertaining to the surface treatment of implantable macro-scale biomaterials for orthopedic and dental applications as well as micro- and nano-biomaterials for disease diagnosis and drug/gene delivery. Recent advances in surface modification techniques encompassing adsorption, deposition, ion implantation, covalent binding, and conversion have spurred more expeditious development of new-generation biomaterials.

Mitigation of Corrosion on Magnesium Alloy by Predesigned Surface Corrosion.

Rapid corrosion of magnesium alloys is undesirable in structural and biomedical applications and a general way to control corrosion is to form a surface barrier layer isolating the bulk materials from the external environment. Herein, based on the insights gained from the anticorrosion behavior of corrosion products, a special way to mitigate aqueous corrosion is described. The concept is based on pre-corrosion by a hydrothermal treatment of Al-enriched Mg alloys in water. A uniform surface composed of an inner compact layer and top Mg-Al layered double hydroxide (LDH) microsheet is produced on a large area using a one-step process and excellent corrosion resistance is achieved in saline solutions. Moreover, inspired by the super-hydrophobic phenomenon in nature such as the lotus leaves effect, the orientation of the top microsheet layer is tailored by adjusting the hydrothermal temperature, time, and pH to produce a water-repellent surface after modification with fluorinated silane. As a result of the trapped air pockets in the microstructure, the super-hydrophobic surface with the Cassie state shows better corrosion resistance in the immersion tests. The results reveal an economical and environmentally friendly means to control and use the pre-corrosion products on magnesium alloys.

Robust Electrodes Based on Coaxial TiC/C–MnO2 Core/Shell Nanofiber Arrays with Excellent Cycling Stability for High-Performance Supercapacitors

A coaxial electrode structure composed of manganese oxide-decorated TiC/C core/shell nanofiber arrays is produced hydrothermally in a KMnO4 solution. The pristine TiC/C core/shell structure prepared on the Ti alloy substrate provides the self-sacrificing carbon shell and highly conductive TiC core, thus greatly simplifying the fabrication process without requiring an additional reduction source and conductive additive. The as-prepared electrode exhibits a high specific capacitance of 645 F g(-1) at a discharging current density of 1 A g(-1) attributable to the highly conductive TiC/C and amorphous MnO2 shell with fast ion diffusion. In the charging/discharging cycling test, the as-prepared electrode shows high stability and 99% capacity retention after 5000 cycles. Although the thermal treatment conducted on the as-prepared electrode decreases the initial capacitance, the electrode undergoes capacitance recovery through structural transformation from the crystalline cluster to layered birnessite type MnO2 nanosheets as a result of dissolution and further electrodeposition in the cycling. 96.5% of the initial capacitance is retained after 1000 cycles at high charging/discharging current density of 25 A g(-1). This study demonstrates a novel scaffold to construct MnO2 based SCs with high specific capacitance as well as excellent mechanical and cycling stability boding well for future design of high-performance MnO2-based SCs.

Plasma Surface Functionalized Polyetheretherketone for Enhanced Osseo-Integration at Bone-Implant Interface

This study aims at improving osseo-integration at the bone-implant interface of polyetheretherketone (PEEK) by water (H2O) and ammonia (NH3) plasma immersion ion implantation (PIII). The pertinent surface characteristics including surface energy, roughness, morphology, and chemical composition are investigated systematically and the in vitro biological performance is evaluated by cell adhesion and proliferation, alkaline phosphatase (ALP) activity, real-time RT-PCR evaluation, and mineralization tests. In vivo osseo-integration is examined via implanting samples into the distal femur of the rats. The hydrophilicity, surface roughness, cell adhesion, and proliferation, ALP activity, and osteogenic differentiation after H2O PIII or NH3 PIII are improved significantly. Furthermore, substantially enhanced osseo-integration is achieved in vivo. Nonline-of-sight plasma surface functionalization, which is particularly suitable for biomedical implants with an irregular geometry, does not alter the bulk compressive yield strength and elastic modulus of the materials. Consequently, the favorable bulk attributes of PEEK are preserved while the surface biological properties are enhanced thus boding well for wider orthopedic application of the biopolymer.

Systematic Study of Inherent Antibacterial Properties of Magnesium-based Biomaterials

Magnesium-based materials are preferred in temporary orthopedic implants because of their biodegradability, mechanical properties, and intrinsic antibacterial properties. However, the fundamental mechanism of bacteria killing and roles of various factors are not clearly understood. In this study, we performed a systematic study of the antibacterial properties of two common Mg-based materials using a biofilm forming bacterium. Complete annihilation of the initial 3 × 10(4) bacteria is achieved with both materials in 0.1 mL LB medium in 24 h, whereas in the control, they proliferate to 10(10). The bacteria are killed more effectively in the solution than on the surface, and the bacteria killing efficiency depends more on the concentrations of the magnesium ions and hydroxyl ions than the corrosion rate. The killing process is reproduced using formula solutions, and killing is revealed to stem from the synergetic effects of alkalinity and magnesium ions instead of either one of them or Mg(OH)2 precipitate. Reactive oxygen species (ROS) are detected from the bacteria during the killing process but are not likely produced by the redox reaction directly, because they are detected at least 3 h after the reaction has commenced. The average cell size increases during the killing process, suggesting that the bacteria have difficulty with normal division which also contributes to the reduced bacteria population.

Wear mechanism and tribological characteristics of porous NiTi shape memory alloy for bone scaffold

The abraded debris might cause osteocytic osteolysis on the interface between implants and bone tissues, thus inducing the subsequent mobilization of implants gradually and finally resulting in the failure of bone implants, which imposes restrictions on the applications of porous NiTi shape memory alloys (SMAs) scaffolds for bone tissue engineering. In this work, the effects of the annealing temperature, applied load, and porosity on the tribological behavior and wear resistance of three-dimensional porous NiTi SMA are investigated systematically. The porous structure and phase transformation during the exothermic process affect the tribological properties and wear mechanism significantly. In general, a larger porosity leads to better tribological resistance but sometimes, SMAs with small porosity possess better wear resistance than ones with higher porosity during the initial sliding stage. It can be ascribed to the better superelasticity of the former at the test temperature. The porous NiTi phase during the exothermic reaction also plays an important role in the wear resistance. Generally, porous NiTi has smaller friction coefficients under high loads due to stress-induced superelasticity. The wear mechanism is discussed based on plastic deformation and microcrack propagation.

Ion Implanted AZ31 Magnesium Alloy

Ion implantation was applied to modify the surface properties of magnesium alloy. About 75 keV titanium ions with a dose of 5×1017 ions/ cm-2 and about 35 keV nitrogen ions with a dose of 3×1017 ions/ cm-2 were implanted into AZ31 magnesium alloy, respectively. AFM and FESEM were used to examine the surface morphology of the treated samples. In contrast to the smooth surface treated by N ion implantation, the Ti-treated surface was severely damaged. AES analysis reveals that both kinds of ions implanted in AZ31 magnesium alloy took on a quasi-Gaussian distribution in the near surface region. In the corrosion test, the N-implanted sample showed a better corrosion resistance in 3.5wt.% NaCl solution than bare AZ31 sample, whereas the Ti-implanted sample accelerated the corrosion behavior of AZ31 in this solution

Surface design of biodegradable magnesium alloys for biomedical applications

Biodegradability is a big advantage of magnesium alloys in biomedical applications such as cardiovascular stents and bone fixation, but rapid corrosion is an obstacle, especially in the initial healing stage. A temporary surface can be constructed on magnesium alloys to tailor the corrosion, biocompatibility, and mechanical properties. In this chapter, the common surface modification techniques suitable for magnesium alloys are introduced, and the associated surface design principles are discussed. The role of these surface modification techniques is further described with examples, and finally, future trends pertaining to surface design are addressed.