Gurudas P. Mane

A Facile Template-Free Approach for the Large-Scale Solid-Phase Synthesis of CdS Nanostructures and Their Excellent Photocatalytic Performance

The simple, template-free, low-temperature, large-scale synthesis of nanostructured CdS with the hexagonal wurtzite phase from bulk cadmium oxide under solid-phase conditions is demonstrated for the first time. The novel approach involves the homogenization of cadmium oxide (CdO) and thiourea in various stoichiometric ratios at moderate temperature. Among the different molar ratios of CdO and thiourea studied, the CdO/NH(2) CSNH(2) molar ratio of 1:2 is found to be the best to obtain highly pure CdS. The obtained CdS nanostructures exhibit excellent cubic morphology and high specific surface area with a particle size in the range of 5-7 nm. The bandgap of the nanostructured CdS is in the range of 2.42 to 2.46 eV due to its nanocrystalline nature. In photoluminescence studies, emission is observed at 520.34 and 536.42 nm, which is characteristic of the greenish-yellow region of the visible spectrum. Considering the bandgap of the CdS is within the visible region, the photocatalytic activity for H(2) generation and organic dye degradation are performed under visible-light irradiation. The maximum H(2) evolution of 2945 μmol h(-1) is obtained using nanostructured CdS prepared in the 1:2 ratio, which is three times higher than that of bulk CdS (1010 μmol h(-1) ). CdS synthesized using the 1:2 molar ratio shows maximum methylene blue degradation (87.5%) over a period of 60 min, which is approximately four times higher than that of bulk CdS (22%). This amazing performance of the material is due to its nanocrystalline nature and the high surface area of the CdS. The proposed simple methodology is believed to be a significant breakthrough in the field of nanotechnology, and the method can be further generalized as a rational preparation scheme for the large-scale synthesis of various other nanostructured metal sulfides.

Synthesis of Nitrogen‐Rich Mesoporous Carbon Nitride with Tunable Pores, Band Gaps and Nitrogen Content from a Single Aminoguanidine Precursor

Highly ordered mesoporous carbon nitride (CN) with an extremely high nitrogen content and tunable pore diameters was synthesized by using a new precursor with a high nitrogen content, aminoguanidine hydrochloride and mesoporous silica SBA-15 with different pore diameters as hard templates. Surprisingly, the N/C ratio of the prepared mesoporous CN (MCN-4: 1.80) was considerably higher than that of the theoretically predicted C(3)N(4) nanostructures (1.33). This is mainly due to the fact that the CN precursor easily undergoes polymerization at high temperature and affords a highly stable polymer composed of a diamino-s-tetrazine moiety with a six-membered aromatic ring containing six nitrogen atoms that are linked trigonally with the nitrogen atoms. The obtained materials were thoroughly characterized by means of XRD, nitrogen adsorption, high resolution TEM, electron energy loss spectra, high resolution SEM, X-ray photoelectron spectroscopy, FTIR, and C, N, O, and S analysis. The results show that the MCN-4 materials possess a well-ordered mesoporous structure similar to SBA-15 with a high specific surface area and tunable band gap in the range of 2.25-2.49 eV. Interestingly, the pore diameter of the materials can be finely tuned from 3.1-5.8 nm by increasing the pore diameter of the hard-template SBA-15. The reaction temperature plays a critical role for the formation of MCN, and we found that 400 °C is the best condition to obtain MCN-4 with a high nitrogen content. We have further investigated the catalytic application of the MCN-4 materials towards Friedel-Crafts hexanoylation of benzene and compared the results with the mesoporous CN with less nitrogen content (MCN-1) and nonporous CN. Among the materials studied, MCN-4 showed the highest activity, affording a high yield of hexanophenone within a few hours, which is mainly due to the presence of free amine groups on the wall structure of MCN-4.

Highly Ordered Nitrogen-Rich Mesoporous Carbon Nitrides and Their Superior Performance for Sensing and Photocatalytic Hydrogen Generation

Mesoporous carbon nitrides (MCN) are fascinating materials with unique semiconducting and basic properties that are useful in many applications including photocatalysis and sensing. Most syntheses of MCN focus on creating theoretically predicted C3 N4 stoichiometry with a band gap of 2.7 eV using a nano-hard templating approach with triazine-based precursors. However, the performance of the MCN in semiconducting applications is limited to the MCN framework with a small band gap, which would be linked with the addition of more N in the CN framework, but this remains a huge challenge. Here, we report a precursor with high nitrogen content, 3-amino-1,2,4-triazole, that enables the formation of new and well-ordered 3D MCN with C3 N5 stoichiometry (MCN-8), which has not been predicted so far, and a low-band-gap energy (2.2 eV). This novel class of material without addition of any dopants shows not only a superior photocatalytic water-splitting performance with a total of 801 μmol of H2 under visible-light irradiation for 3 h but also excellent sensing properties for toxic acids.

Enhanced Supercapacitor Performance of N‐Doped Mesoporous Carbons Prepared from a Gelatin Biomolecule

Nitrogen-containing mesoporous carbon electrodes with tunable pore diameters for supercapacitor applications are synthesized by the nanocasting technique using a naturally abundant gelatin polymer as the single precursor for nitrogen and carbon.

A facile photo-induced synthesis of COOH functionalized meso-macroporous carbon films and their excellent sensing capability for aromatic amines

A simple photo-induced approach is developed for the preparation of COOH functionalized meso-macroporous carbon films with tunable pores without using any inorganic mesoporous silica templates, which show excellent sensing selectivity for aniline and the selectivity can be enhanced upon increasing COOH functional groups.

Co3O4 microcubes with exceptionally high conductivity using a CoAl layered double hydroxide precursor via soft chemically synthesized cobalt carbonate

Cubic microparticles of Co3O4 spinel were synthesized by calcination of CoCO3 obtained using CoAl layered double hydroxide (LDH) as a unitary precursor through soft-chemical decomposition. The obtained cobalt spinel showed an exceptionally high electrical conductivity at room temperature. This is attributed to high concentrations of charge carriers (Co4+), unique morphology, high reduction temperature and low activation barrier.

Diaminotetrazine based mesoporous C3N6 with a well-ordered 3D cubic structure and its excellent photocatalytic performance for hydrogen evolution

Novel nitrogen enriched diamino-s-tetrazine based highly ordered 3D mesoporous carbon nitride (MCN-9) hybrid materials with a body centered cubic Ia3d structure having high specific surface areas, large pore volumes, and tunable pore diameters were prepared by employing 3D body centered cubic KIT-6 mesoporous silica having a gyroidal porous structure and various pore diameters as the sacrificial hard template through a simple self-condensation followed by polymerization reaction of aminoguanidine hydrochloride inside the nanochannels of the KIT-6 template. Characterization results reveal that the prepared materials exhibit a 3D porous structure with well-defined mesopores and possess excellent physical parameters including high surface areas (157–346 m2 g−1), large pore volumes (0.36–0.63 cm3 g−1), different pore diameters (5.5–6.0 nm) and a high N/C ratio of 1.87, which is much higher than that of ideal C3N4 (1.33). The deep yellow colored MCN-9 with a 3D porous structure also shows good absorption properties with a tunable narrow bandgap of 2.25–2.5 eV, which is again much lower than that of C3N4 (2.7 eV) and helps to achieve much higher photocatalytic water splitting activity than non-porous C3N4 and other carbon nitrides under visible light irradiation.

Cobalt oxide functionalized nanoporous carbon electrodes and their excellent supercapacitive performance

Nanoporous carbon (CMK-3-150) functionalized with different amounts of cobalt oxide (CoO) nanoparticles was synthesized by an incipient wetness impregnation technique for supercapacitor application. The characterization results reveal that the specific surface area and pore volume of the CoO functionalized CMK-3-150 marginally decrease upon increasing the amount of the CoO whereas the pore diameter and the structure of the CMK-3-150 were not affected even after the functionalization. The electrochemical measurements show that the specific capacitance of the electrodes was enhanced after the functionalization with CoO. Among the electrodes studied, CMK-3-150 functionalized with 15 wt% CoO shows an excellent cycling stability and specific capacitance of 331 F g−1, which is ca. two times higher than that of the pure nanoporous carbon. This enhanced performance is due to the combined contribution of electrical double layer capacitance and pseudocapacitance. A symmetric supercapacitor device based on the CMK-3-150–15Co electrode gives the maximum energy density of 29.67 W h kg−1 at a power density of 0.07 kW kg−1.

Mesoporous BN and BCN nanocages with high surface area and spherical morphology

Novel mesoporous BN and BCN materials with cage type porous structure and spherical morphology have been synthesized using carbon nanocages with 3D porous structure as a template via an elemental substitution method at a low synthesis temperature. The obtained materials exhibit a large specific pore volume with uniform pore size distribution and the specific surface area ranging from 945 to 1023 m(2) g(-1).

Highly Selective Synthesis of Ortho‐Prenylated Phenols and Chromans by using a New Bimetallic CuAl‐KIT‐5 with a 3D‐Cage‐type Mesoporous Structure

A nice piece of KIT: The first synthesis of a new bimetallic 3D-cage-type mesoporous catalyst CuAl-KIT-5 and its remarkable performance for the highly selective synthesis of ortho-prenylated phenols and chromans is reported.