Gyan P Singh

Phenytoin as a coanalgesic in cancer pain

The efficacy of phenytoin (PHT), buprenorphine (Bu), and Bu+PHT for the relief of cancer pain of various etiologies was evaluated in a randomized, double-blind study of 3 groups, each comprised of 25 patients. Treatment duration was 1 month. PHT (100 mg by mouth twice daily) provided greater than 50% pain relief to 18 patients (72%) and greater than 75% relief to 4 (16%). Bu (0.2 mg sublingually twice daily) gave 21 patients (84%) greater than 50% relief and 15 patients (60%) greater than 75% relief. Of the Bu-treated patients, 8 had major side effects, while none of the PHT-treated patients experienced significant untoward reactions. Combined therapy (PHT, 50 mg PO+Bu 0.1 mg SL twice daily) provided greater than 50% pain relief to 22 patients (88%) and greater than 75% to 18 (72%); only 3 patients experienced a significant side effect. This study suggests that phenytoin has mild-to-moderate pain-relieving properties of its own and can significantly enhance buprenorphine analgesia. By permitting a lower opioid dose, it may reduce the occurrence of opioid-related side effects. PHTs lack of serious side effects, as well as its documented anxiolytic and antidepressant actions, may add to its comparative usefulness. Further clinical trials of PHT as a coanalgesic and/or adjuvant agent in cancer pain are warranted.

A comparison of shear bond strength of orthodontic brackets bonded with four different orthodontic adhesives.

Objectives: The objective of this study is to compare the shear bond strength (SBS) of stainless steel (SS) orthodontic brackets bonded with four different orthodontic adhesives. Materials and Methods: Eighty newly extracted premolars were bonded to 0.022 SS brackets (Ormco, Scafati, Italy) and equally divided into four groups based on adhesive used: (1) Rely-a-Bond (self-cure adhesive, Reliance Orthodontic Product, Inc., Illinois, USA), (2) Transbond XT (light-cure adhesive, 3M Unitek, CA, USA), (3) Transbond Plus (sixth generation self-etch primer, 3M Unitek, CA, USA) with Transbond XT (4) Xeno V (seventh generation self-etch primer, Dentsply, Konstanz, Germany) with Xeno Ortho (light-cure adhesive, Dentsply, Konstanz, Germany) adhesive. Brackets were debonded with a universal testing machine (Model No. 3382 Instron Corp., Canton, Mass, USA). The adhesive remnant index (ARI) was recordedIn addition, the conditioned enamel surfaces were observed under a scanning electron microscope (SEM). Results: Transbond XT (15.49 MPa) attained the highest bond strength. Self-etching adhesives (Xeno V, 13.51 MPa; Transbond Plus, 11.57 MPa) showed clinically acceptable SBS values and almost clean enamel surface after debonding. The analysis of variance (F = 11.85, P < 0.0001) and Chi-square (χ2 = 18.16, P < 0.05) tests revealed significant differences among groups. The ARI score of 3 (i.e., All adhesives left on the tooth) to be the most prevalent in Transbond XT (40%), followed by Rely-a-Bond (30%), Transbond Plus with Transbond XT (15%), and Xeno V with Xeno Ortho (10%). Under SEM, enamel surfaces after debonding of the brackets appeared porous when an acid-etching process was performed on the surfaces of Rely-a-Bond and Transbond XT, whereas with self-etching primers enamel presented smooth and almost clean surfaces (Transbond Plus and Xeno V group). Conclusion: All adhesives yielded SBS values higher than the recommended bond strength (5.9-7–8 MPa), Seventh generation self-etching primer Xeno V with Xeno Ortho showed clinically acceptable SBS and the least amount of residual adhesive left on the enamel surface after debonding.

Brodie bite with an extracted mandibular first molar in a young adult: A case report

Total buccal crossbites are rare, but, when they occur, they can be extremely difficult to correct, even with surgery and orthodontics. In most patients with in-locking crossbites, the maxillary teeth erupt past their mandibular antagonists, creating severe occlusal difficulties. This article presents an adult patient with scissors-bite or partial telescoping bite bilaterally in the posterior region and an extracted mandibular first molar on the right side. She was treated with expansion of the mandibular arch, and the subsequent open bite was closed with the help of masticatory muscle exercises and high-pull headgear. The second and third molars were uprighted and moved mesially to close the extraction spaces.

Comparison of esthetic outcome after extraction or non-extraction orthodontic treatment in class II division 1 malocclusion patients

Introduction: The extraction of premolars as a practical form of orthodontic therapy has been accepted for many years, but there remains a controversy regarding the effect of premolar extraction to improve esthetics as well as dentoskeletal relationship. The esthetic impact of the soft-tissue profile might play a major role in deciding on premolar extraction or non-extraction treatment, particularly in borderline patients. This cephalometric study was undertaken to compare the post-treatment soft-tissue profiles of successfully managed Class II, Division 1 malocclusions treated with either all first premolar extractions or treatment with a non-extraction therapy. Materials and Methods: The sample consisted of 100 post-pubertal female patients of Class II Division I malocclusion. Group 1, treated with four first premolar extractions, consisted of 50 female patients with a mean age of 14 years 1 month. Group 2, treated without extractions, consisted of 50 patients with a mean age of 13 years 5 months. Pre-treatment and post-treatment lateral cephalometric radiographs were evaluated. The pre-treatment to post-treatment stage comparison and the intergroup comparison of the treatment changes were conducted between extraction and non-extraction groups of Class II malocclusion samples with t-tests. Results: The soft-tissue facial profiles of the extraction and non-extraction samples were the same following active treatment except for a more retruded lower lip and a more pronounced lower labial sulcus in those patients subjected to extraction. Conclusions: The extraction or non-extraction decision, if based on sound diagnostic criteria, seems to have no systematic detrimental effects on the facial profile.

Cerebrospinal fluid cytokines and matrix metalloproteinases in human immunodeficiency seropositive and seronegative patients of tuberculous meningitis.

Background: Some important clinical differences exist between human immunodeficiency virus (HIV)-seropositive and HIV-seronegative patients. Alterations in the cerebrospinal fluid (CSF) cytokines and matrix metalloproteinase have been noted in tuberculous meningitis. In HIV-infected patients, the immunopathogenesis is expected to be different. Materials and Methods: In this study, 64 patients of tuberculous meningitis (28 HIV seropositive and 36 seronegative) were included. The patients were followed up for six months. Cerebrospinal fluid (CSF) samples of tuberculous meningitis patients and 20 controls were subjected to tissue necrosis factor (TNF)-α, interleukin (IL)-1β, interferon (IFN)-γ, IL-10, matrix metalloproteinase (MMP)-2, and MMP-9 estimations. The levels were correlated with the patients’ baseline clinical characteristics, CSF parameters, neuroimaging findings, and the outcome. The outcome was assessed and modified with the Barthel index. Results: The CSF cytokines and MMP levels were significantly elevated in tuberculous meningitis when compared with the controls. There was no significant difference seen between HIV seropositive and seronegative tuberculous meningitis, except for the IL-1β level, which was significantly lower in the HIV-infected patients. The cytokine and MMP levels did not correlate with the baseline clinical characteristics, disease severity, cerebrospinal fluid characteristics, neuroimaging findings, and outcome. Conclusion: In conclusion, HIV infection did not affect a majority of the CSF cytokines and MMP levels in tuberculous meningitis except for IL-1β level. None of the estimated inflammatory parameters correlated with the outcome.

An ultrasonographic evaluation of masseter muscle thickness in different dentofacial patterns.

OBJECTIVES The aim of this study is to compare the masseter muscle thickness in different vertical dentofacial patterns and identify the possible sexual dimorphism and also to correlate masseter muscle thickness with craniofacial morphology using cephalometric parameters. MATERIALS AND METHODS The masseter muscle thickness was measured using ultrasonography in 60 subjects (30 females and 30 males). Standardized lateral and posteroanterior cephalograms were taken to determine the facial morphology. The subjects were divided into three vertical pattern groups (I, II, and III) according to their Jarabak ratio: hypodivergent ( n = 20), normodivergent (n = 20), and hyperdivergent (n = 20). The sample was further subdivided into males and female subgroups. RESULTS Masseter muscle thickness relaxed (MMTR) in hypodivergent group was 13.94 ± 1.51. Mean value of MMTR in normodivergent group was 12.53 ± 1.21 and the MMTR in hyperdivergent group was 11.13 ± 1.18. The mean value of masseter muscle thickness contracted (MMTC) in hypodivergent group was 15.46 ± 1.33. Mean value of MMTC in normodivergent group was 13.81 ± 1.38 and the mean value of MMTC in hyperdivergent group was 12.27 ± 1.26. MMTC showed a significant, negative correlation with mandibular plane angle and gonial angle. Posterior facial height, symphysis width, intermolar width of maxillary first molars, maxillary width, and facial width (bizygomatic width) showed significant ( P < 0.05 or P < 0.01) positive correlation. CONCLUSION The masseter muscle thickness varied among the three vertical dentofacial patterns and sexual dimorphism also existed except in the hyperdivergent group. Masseter muscle thickness was found to be negatively correlated to vertical facial pattern and positively associated with transverse craniofacial morphology.

A comparative study of frictional resistance during simulated canine retraction on typodont model.

Objectives: Frictional resistance is an important counterforce to orthodontic tooth movement during sliding mechanics. This study was carried out to evaluate the effect of different bracket-archwire-ligation combinations on “resistance to sliding” during simulated canine retraction on typodont model. Materials and Methods: the frictional resistance was tested between three modern orthodontic brackets-stainless steel, ceramic, and ceramic with metal slot (0.022-inch), and seven different archwires (0.019 × 0.025-inch)-stainless steel, nickel-titanium, Teflon coated stainless steel, stainless steel with the reverse curve of spee (RCS), Teflon coated stainless steel with RCS, Teflon coated nickel-titanium and nickel-titanium with RCS ligated with stainless steel ligature wire and regular clear elastomeric modules. All tests were carried out in a dry state on an Instron universal testing machine (crosshead speed: 0.5 mm/min). 10 measurements were made from each bracket-archwire-ligature combinations. Results: The highest mean frictional resistance was found in ceramic brackets with nickel-titanium RCS archwire ligated with elastomeric modules while minimum frictional resistance was found in stainless steel brackets with Teflon coated stainless steel archwire ligated with stainless steel ligature. Metal slot ceramic brackets generated significantly lower frictional forces than ceramic brackets, but higher values than stainless steel brackets. Teflon coated archwires shows highly significant reduction of the frictional resistance than their corresponding uncoated archwires. Archwires with RCS had the higher frictional resistance than normal counterpart archwires. Conclusion: Ceramic brackets with metal slot and Teflon coated SS archwires seem to be a good alternative to conventional stainless steel brackets and archwires in space closure with sliding mechanics in patients with esthetic demands.

Cephalometric evaluation of hyoid bone position and pharyngeal spaces following treatment with Twin block appliance.

Objective: To evaluate the position of hyoid bone in the subjects treated with Twin block appliance. Materials and Methods: The sample consisted of 40 Angles Class II division 1 subjects treated with Twin block appliance. Lateral radiographs were taken before and after treatment. According to Schudys facial divergence angle (SN-MP), the subjects were classified in to three groups: group I (hypodivergent, SN-MP: <31° (27°-30°), n=15), group II (normodivergent, SN-MP: 31°-34°, n=15), and group III (hyperdivergent, SN-MP: >34° (35°−38°), n=10). Lateral cephalograms were traced and analyzed manually. After measurements of variables, Students t-test and one-way analysis of variance (ANOVA) were performed. Results: Post treatment with Twin block therapy, hyoid bone shifted significantly (P<0.01) forward in horizontal dimension in all three groups, although it was highest in group III. However, there was no significant difference amongst the groups. In vertical dimension, hyoid bone shifted in upward direction in all three groups; however, the shift was significant (P<0.01) only in group I and there was a significant difference between group I and rest of the two groups. Width of upper airway significantly (P<0.01) increased and ANB angle significantly (P<0.001) decreased in all three groups with forward movement of mandible. Conclusions: After treatment with Twin block appliance, significant changes occurred in horizontal dimension (anterior displacement), which resulted in significant increase in width of upper pharynx in all three groups.

Cytokines, MMP-2, and MMP-9 levels in patients with a solitary cysticercus granuloma.

OBJECTIVES In patients with neurocysticercosis, perilesional inflammatory activity is thought to be responsible for seizures. This study was designed to evaluate the serum and cerebrospinal fluid (CSF) concentrations of cytokines as well as matrix metalloproteinase (MMP)-2 and MMP-9 in patients with a solitary cysticercus granuloma. MATERIALS AND METHODS The study included 47 patients suffering from seizures in whom a solitary cysticercus granuloma was detected on a computed tomography (CT) scan. The study also included 47 control subjects. Their serum and cerebrospinal fluid (CSF) was analysed for cytokines and MMP levels. A follow-up CT was performed after 6 months. RESULTS The median levels of cytokines, interleukin (IL)-1β, IL-5, IL-6, IL-10 and tissue necrosis factor (TNF)-α, MMP-2 and MMP-9 were significantly elevated, both in the serum and CSF of patients having an intracerebral solitary cysticercus granuloma, in comparison to that of controls. The follow-up CT revealed that in 27 patients, the lesions were calcified and in 5 patients, there was complete resolution of the lesions. In 15 patients, the lesions remained unchanged. Higher baseline CSF MMP-2 and TNF-α level were seen in patients with persisting lesions. Higher serum baseline MMP-2, IL-6 and a low CSF IL-10 level were seen in patients with complete resolution of the granuloma. A high baseline IL-1β level was associated with a calcified lesion. Fourteen patients had recurrence of seizures. A high baseline serum TNF-α level was independently associated with seizure recurrence (P = 0.021, OR = 1.041, CI = 1.006 to 1.078). CONCLUSION In patients with a solitary cysticercus granuloma, cytokines and matrix metalloproteinases in the CSF and serum are elevated. Different patterns of immunological changes were observed in patients following resolution or calcification of the lesion.

A newer simultaneous space creation, eruption, and adjacent root control spring for the management of impacted tooth.

Usually, treatment of impaction includes: Welcome preparation (to create space), surgical exposure and attachment to the impacted tooth and the orthodontic guidance for the eruption of the impacted tooth. Sometimes, due to deficiency of space, creation of space for impacted tooth requires first, and space regaining efforts may require the distal movement of posterior teeth and or mesial movement of anterior teeth in the arch, but it may create some problems. To overcome the unwanted problem in this clinical situation and to reduce overall treatment duration of the patient, we have developed the Simultaneous space creation, Eruption and Adjacent root control spring to control crown as well as root movement.