Gyutae Nam

All‐Solid‐State Cable‐Type Flexible Zinc–Air Battery

A cable-type flexible Zn-air battery with a spiral zinc anode, gel polymer electrolyte (GPE), and air cathode coated on a nonprecious metal catalyst is designed in order to extend its application area toward wearable electronic devices.

Metal-Free Ketjenblack Incorporated Nitrogen-Doped Carbon Sheets Derived from Gelatin as Oxygen Reduction Catalysts

Electrocatalysts facilitating oxygen reduction reaction (ORR) are vital components in advanced fuel cells and metal-air batteries. Here we report Ketjenblack incorporated nitrogen-doped carbon sheets derived from gelatin and apply these easily scalable materials as metal-free electrocatalysts for ORR. These carbon nanosheets demonstrate highly comparable catalytic activity for ORR as well as better durability than commercial Vulcan carbon supported Pt catalysts in alkaline media. Physico-chemical characterization and theoretical calculations suggest that proper combination of graphitic and pyridinic nitrogen species with more exposed edge sites effectively facilitates a formation of superoxide, [O2(ad)](-), via one-electron transfer, thus increasing catalytic activities for ORR. Our results demonstrate a novel strategy to expose more nitrogen doped edge sites by irregular stacked small sheets in developing better electrocatalysts for Zn-air batteries. These desirable architectures are embodied by an amphiphlilic gelatin mediated compatible synthetic strategy between hydrophobic carbon and aqueous water.

Optimizing nanoparticle perovskite for bifunctional oxygen electrocatalysis

Highly efficient bifunctional oxygen electrocatalysts are indispensable for the development of highly efficient regenerative fuel cells and rechargeable metal-air batteries, which could power future electric vehicles. Although perovskite oxides are known to have high intrinsic activity, large particle sizes rendered from traditional synthesis routes limit their practical use due to low mass activity. We report the synthesis of nano-sized perovskite particles with a nominal composition of Lax(Ba0.5Sr0.5)1−xCo0.8Fe0.2O3−δ (BSCF), where lanthanum concentration and calcination temperature were controlled to influence oxide defect chemistry and particle growth. This approach produced bifunctional perovskite electrocatalysts ∼50 nm in size with supreme activity and stability for both the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). The electrocatalysts preferentially reduced oxygen to water (<5% peroxide yield), exhibited more than 20 times higher gravimetric activity (A g−1) than IrO2 in OER half-cell tests (0.1 M KOH), and surpassed the charge/discharge performance of Pt/C (20 wt%) in zinc-air full cell tests (6 M KOH). Our work provides a general strategy for designing perovskite oxides as inexpensive, stable and highly active bifunctional electrocatalysts for future electrochemical energy storage and conversion devices.

Fabrication of Ba0.5Sr0.5Co0.8Fe0.2O3–δ Catalysts with Enhanced Electrochemical Performance by Removing an Inherent Heterogeneous Surface Film Layer

A heat-treatment approach for Ba0.5Sr0.5Co0.8Fe0.2O(3-δ) (BSCF5582) is introduced as a way of enhancing the electrocatalytic performance of perovskite catalysts. The perovskite made by heat-treatment in oxygen atmosphere loses around 30 nm of spinel layer on the surface relative to the untreated version, and demonstrates enhanced oxygen reduction reaction and oxygen evolution reaction catalytic activities.

Integrated Hierarchical Cobalt Sulfide/Nickel Selenide Hybrid Nanosheets as an Efficient Three-dimensional Electrode for Electrochemical and Photoelectrochemical Water Splitting

Developing highly active electrocatalysts for photoelectrochemical water splitting is critical to bring solar/electrical-to-hydrogen energy conversion processes into reality. Herein, we report a three-dimensional (3D) hybrid electrocatalyst that is constructed through in situ anchoring of Co9S8 nanosheets onto the surface of Ni3Se2 nanosheets vertically aligned on an electrochemically exfoliated graphene foil. Benefiting from the synergistic effects between Ni3Se2 and Co9S8, the highly conductive graphene support, and large surface area, the novel 3D hybrid electrode delivers superior electrocatalytic activity toward water reduction in alkaline media, featuring overpotentials of -0.17 and -0.23 V to achieve current densities of 20 and 50 mA cm-2, respectively, demonstrating an electrocatalytic performance on the top of the Ni3Se2- and Co9S8-based electrocatalysts as reported in literature. Experimental investigations and theoretical calculations confirm that the remarkable activity of the obtained material results from the unique 3D hierarchical architecture and interface reconstruction between Ni3Se2 and Co9S8 through Ni-S bonding, which leads to charge redistribution and thus lowers the energy barrier of hydrogen desorption in the water splitting process. Further integration of the 3D hybrid electrode with a macroporous silicon photocathode enables highly active and sustainable sunlight-driven water splitting in both basic media and real river water. The overall water splitting with 10 mA cm-2 at a low voltage of 1.62 V is achieved using our hybrid as both anode and cathode catalysts, which surpasses that of the Ir/C-Pt/C couple (1.60 V) for sufficiently high overpotentials.

Single crystalline pyrochlore nanoparticles with metallic conduction as efficient bi-functional oxygen electrocatalysts for Zn-air batteries

Oxygen reduction reaction (ORR) or oxygen evolution reaction (OER) electrocatalysts including carbon-, non-precious metal-, metal alloy-, metal oxide-, and carbide/nitride-based materials are of great importance for energy conversion and storage technologies. Among them, metal oxides (e.g., perovskite and pyrochlore) are known to be promising candidates as electrocatalysts. Nevertheless, the intrinsic catalytic activities of pyrochlore oxides are still poorly understood because of the formation of undesirable phases derived from the synthesis processes. Herein, we present highly pure single crystalline pyrochlore nanoparticles with metallic conduction (Pb2Ru2O6.5) as an efficient bi-functional oxygen electrocatalyst. Notably, it has been experimentally shown that the covalency of Ru–O bonds affects the ORR and OER activities by comparing the X-ray absorption near edge structure (XANES) spectra of the metallic Pb2Ru2O6.5 and insulating Sm2Ru2O7 for the first time. Moreover, we followed the interatomic distance changes of Ru–O bonds using in situ X-ray absorption spectroscopy (XAS) to investigate the structural stabilities of the pyrochlore catalysts during electrocatalysis. The highly efficient metallic Pb2Ru2O6.5 exhibited outstanding bi-functional catalytic activities and stabilities for both ORR and OER in aqueous Zn–air batteries.

Enhanced Intrinsic Catalytic Activity of λ-MnO2 by Electrochemical Tuning and Oxygen Vacancy Generation

Chemically prepared λ-MnO2 has not been intensively studied as a material for metal-air batteries, fuel cells, or supercapacitors because of their relatively poor electrochemical properties compared to α- and δ-MnO2 . Herein, through the electrochemical removal of lithium from LiMn2 O4 , highly crystalline λ-MnO2 was prepared as an efficient electrocatalyst for the oxygen reduction reaction (ORR). The ORR activity of the material was further improved by introducing oxygen vacancies (OVs) that could be achieved by increasing the calcination temperature during LiMn2 O4 synthesis; a concentration of oxygen vacancies in LiMn2 O4 could be characterized by its voltage profile as the cathode in a lithiun-metal half-cell. λ-MnO2-z prepared with the highest OV exhibited the highest diffusion-limited ORR current (5.5 mA cm(-2) ) among a series of λ-MnO2-z electrocatalysts. Furthermore, the number of transferred electrons (n) involved in the ORR was >3.8, indicating a dominant quasi-4-electron pathway. Interestingly, the catalytic performances of the samples were not a function of their surface areas, and instead depended on the concentration of OVs, indicating enhancement in the intrinsic catalytic activity of λ-MnO2 by the generation of OVs. This study demonstrates that differences in the electrochemical behavior of λ-MnO2 depend on the preparation method and provides a mechanism for a unique catalytic behavior of cubic λ-MnO2 .

A Highly Efficient and Robust Cation Ordered Perovskite Oxide as a Bifunctional Catalyst for Rechargeable Zinc-Air Batteries

Of the various catalysts that have been developed to date for high performance and low cost, perovskite oxides have attracted attention due to their inherent catalytic activity as well as structural flexibility. In particular, high amounts of Pr substitution of the cation ordered perovskite oxide originating from the state-of-the-art Ba0.5Sr0.5Co0.8Fe0.2O3-δ (BSCF) electrode could be a good electrode or catalyst because of its high oxygen kinetics, electrical conductivity, oxygen capacity, and structural stability. However, even though it has many favorable intrinsic properties, the conventional high-temperature treatment for perovskite synthesis, such as solid-state reaction and combustion process, leads to the particle size increase which gives rise to the decrease in surface area and the mass activity. Therefore, we prepared mesoporous nanofibers of various cation-ordered PrBa0.5Sr0.5Co2-xFexO5+δ (x = 0, 0.5, 1, 1.5, and 2) perovskites via electrospinning. The well-controlled B-site metal ratio and large surface area (∼20 m2 g-1) of mesoporous nanofiber result in high performance of the oxygen reduction reaction and oxygen evolution reaction and stability in zinc-air battery.

Unveiling the Catalytic Origin of Nanocrystalline Yttrium Ruthenate Pyrochlore as a Bifunctional Electrocatalyst for Zn–Air Batteries

Zn-air batteries suffer from the slow kinetics of oxygen reduction reaction (ORR) and/or oxygen evolution reaction (OER). Thus, the bifunctional electrocatalysts are required for the practical application of rechargeable Zn-air batteries. In terms of the catalytic activity and structural stability, pyrochlore oxides (A2[B2-xAx]O7-y) have emerged as promising candidates. However, a limited use of A-site cations (e.g., lead or bismuth cations) of reported pyrochlore catalysts have hampered broad understanding of their catalytic effect and structure. More seriously, the catalytic origin of the pyrochlore structure was not clearly revealed yet. Here, we report the new nanocrystalline yttrium ruthenate (Y2[Ru2-xYx]O7-y) with pyrochlore structure. The prepared pyrochlore oxide demonstrates comparable catalytic activities in both ORR and OER, compared to that of previously reported metal oxide-based catalysts such as perovskite oxides. Notably, we first find that the catalytic activity of the Y2[Ru2-xYx]O7-y is associated with the oxidations and corresponding changes of geometric local structures of yttrium and ruthenium ions during electrocatalysis, which were investigated by in situ X-ray absorption spectroscopy (XAS) in real-time. Zn-air batteries using the prepared pyrochlore oxide achieve highly enhanced charge and discharge performance with a stable potential retention for 200 cycles.

NiFe (Oxy) Hydroxides Derived from NiFe Disulfides as an Efficient Oxygen Evolution Catalyst for Rechargeable Zn-Air Batteries: The Effect of Surface S Residues

A facile H2 O2 oxidation treatment to tune the properties of metal disulfides for oxygen evolution reaction (OER) activity enhancement is introduced. With this method, the degree of oxidation can be readily controlled and the effect of surface S residues in the resulted metal (oxy)hydroxides for the OER is revealed for the first time. The developed NiFe (oxy)hydroxide catalyst with residual S demonstrates an extraordinarily low OER overpotential of 190 mV at the current density of 10 mA cm-2 after coupling with carbon nanotubes, and outstanding performance in Zn-air battery tests. Theoretical calculation suggests that the surface S residues can significantly reduce the adsorption free energy difference between O* and OH* intermediates on the Fe sites, which should account for the high OER activity of NiFe (oxy)hydroxide catalysts. This work provides significant insight regarding the effect of surface heteroatom residues in OER electrocatalysis and offers a new strategy to design high-performance and cost-efficient OER catalysts.