H.K. Imdadul

A comprehensive review on the assessment of fuel additive effects on combustion behavior in CI engine fuelled with diesel biodiesel blends

Development in transport technology is a major issue owing to the increase the number of vehicles, which in turn increases emissions, which result in global warming. The world’s present transportation systems are greatly dependent on petroleum which will deplete rapidly due to limited reserves of fossil fuel. In addition, transportation is responsible for more than 25 percent of the world’s greenhouse gas (GHG) emissions, and this share is rising, which is a threat for future. As an alternative, biodiesel has drawn attention due to its renewability, biodegradability, high conductivity, low sulfur content, flash point, low aromatic content, increased lubricity etc. with less carbon monoxide and carbon dioxide emission. On the other hand, as the viscosity of biodiesel is greater than diesel due to its higher molecular mass and chemical structure, problems such as pumping, combustion, atomization in the injector system, injector deposit, plugging of filters, carbon deposits on piston and head of engine occur. Most previous studies concluded that although particulate emissions from biodiesel fuelled engines are much less than in gasoline, NOx emissions increases significantly. The adjustment of ignition delay in the premixed combustion phase, faster rate of fuel burn, advanced start of combustion, low radiation heat transfer and variable adiabatic flame temperature is mainly responsible for NOx formation and other emissions. Hence fuel additives may play an important role to counteract such problems and achieve various specified standards. Researchers have used many additives to improve the quality of biodiesel such as metal-based additives, oxygenated additives, cetane improvers, ignition promoters, cold-flow improvers, antioxidants and lubricity improvers etc. This literature review characterizes the combustion behavior of diesel engines fuelled by diesel, biodiesel and its blends including additives. It was found that combustion characteristics were improved by introducing additives into diesel and biodiesel blends, while exhaust emissions are also reduced.

A comprehensive review on biodiesel cold flow properties and oxidation stability along with their improvement processes

Biodiesel, which comprises fatty acid esters, is derived from different sources, such as vegetable oils from palm, sunflower, soybean, canola, Jatropha, and cottonseed sources, animal fats, and waste cooking oil. Biodiesel is considered as an alternative fuel for diesel engines. However, biodiesel has poor cold flow behavior (i.e., high cloud point & pour point) and oxidation stability compared with petroleum diesel because of the presence of saturated and unsaturated fatty acid esters. Consequently, the performance of biodiesel during cold weather is affected. When biodiesel is oxidized, the subsequent dregs can adversely affect the performance of the fuel system as well as clog the fuel filter, fuel lines, and injector. This phenomenon results in start-up and operability problems. Cold flow behavior is usually assessed through the pour point (PP), cloud point (CP), and cold filter plugging point (CFPP). Earlier studies on cold flow focused on reducing the devastating effect of poor cold flow problems, such as lowering the PP, CP, and CFPP of biodiesel. This present paper provides an overview of the cold flow behavior and oxidation stability of biodiesel, as well as their effect on the engine operation system. The improvements on the behavior of cold flow of biodiesel are also discussed.

A comprehensive study on the improvement of oxidation stability and NOx emission levels by antioxidant addition to biodiesel blends in a light-duty diesel engine

Moringa oleifera oil, a non-edible biodiesel feedstock with high unsaturated fatty acid content, was used in this study. MB20 (20% Moringa oil methyl ester and 80% diesel fuel blend) was mixed with three antioxidants, namely, N,N′-diphenyl-1,4-phenylenediamine (DPPD), N-phenyl-1,4-phenylenediamine (NPPD) and 2-ethylhexyl nitrate (EHN), at a concentration of 1000 ppm. The effects of these antioxidants on the oxidation stability of biodiesel as well as on the exhaust emission and performance of a single-cylinder diesel engine were analysed. After the Rancimat test, oxidation stability was enhanced by the antioxidants in the order of DPPD > NPPD > EHN. Results also showed that DPPD-, NPPD- and EHN-treated blends reduced NOx emissions within 5.9–8.80% compared with those in the untreated blend because of suppressed free radical formation. Antioxidant-treated blends contained high amounts of carbon monoxide and hydrocarbon and showed improved smoke opacity, thereby indicating that emissions were below the diesel fuel emission levels. Results demonstrated that antioxidant addition to MB20 improves engine performance characteristics. This study shows that MB20 blends with antioxidants can be used in diesel engines without any modification.

Experimental assessment of non-edible candlenut biodiesel and its blend characteristics as diesel engine fuel

Exploring new renewable energy sources as a substitute of petroleum reserves is necessary due to fulfilling the oncoming energy needs for industry and transportation systems. In this quest, a lot of research is going on to expose different kinds of new biodiesel sources. The non-edible oil from candlenut possesses the potential as a feedstock for biodiesel production. The present study aims to produce biodiesel from crude candlenut oil by using two-step transesterification process, and 10%, 20%, and 30% of biodiesel were mixed with diesel fuel as test blends for engine testing. Fourier transform infrared (FTIR) and gas chromatography (GC) were performed and analyzed to characterize the biodiesel. Also, the fuel properties of biodiesel and its blends were measured and compared with the specified standards. The thermal stability of the fuel blends was measured by thermogravimetric analysis (TGA) and differential scan calorimetry (DSC) analysis. Engine characteristics were measured in a Yanmar TF120M single cylinder direct injection (DI) diesel engine. Biodiesel produced from candlenut oil contained 15% free fatty acid (FFA), and two-step esterification and transesterification were used. FTIR and GC remarked the biodiesels’ existing functional groups and fatty acid methyl ester (FAME) composition. The thermal analysis of the biodiesel blends certified about the blends’ stability regarding thermal degradation, melting and crystallization temperature, oxidative temperature, and storage stability. The brake power (BP), brake specific fuel consumption (BSFC), and brake thermal efficiency (BTE) of the biodiesel blends decreased slightly with an increasing pattern of nitric oxide (NO) emission. However, the hydrocarbon (HC) and carbon monoxides (CO) of biodiesel blends were found decreased.