Haibo Zeng

Quantum Dot Light‐Emitting Diodes Based on Inorganic Perovskite Cesium Lead Halides (CsPbX3)

Novel quantum-dot light-emitting diodes based on all-inorganic perovskite CsPbX3 (X = Cl, Br, I) nanocrystals are reported. The well-dispersed, single-crystal quantum dots (QDs) exhibit high quantum yields, and tunable light emission wavelength. The demonstration of these novel perovskite QDs opens a new avenue toward designing optoelectronic devices, such as displays, photodetectors, solar cells, and lasers.

ZnO-based hollow nanoparticles by selective etching: elimination and reconstruction of metal-semiconductor interface, improvement of blue emission and photocatalysis.

A weak acid selective etching strategy was put forward to fabricate oxide-based hollow nanoparticles (HNPs) using core/shell nanostructures of active metal/oxide nanoparticles as sacrificial templates. ZnO-based HNPs, including pure ZnO, Au/ZnO, Pt/ZnO, and Au/Pt/ZnO HNPs with diameter below 50 nm and shell thickness below 6 nm has been first achieved at low temperature. The diameter, thickness, and even sizes of ZnO and noble metal ultrafine crystals of HNPs can be well adjusted by the etching process. Synchronous with the formation of HNPs, the internal metal-semiconductor interfaces can be controllably eliminated (Zn-ZnO) and reconstructed (noble metal-ZnO). Excitingly, such microstructure manipulation has endued them with giant improvements in related performances, including the very strong blue luminescence with enhancement over 3 orders of magnitude for the pure ZnO HNPs and the greatly improved photocatalytic activity for the noble metal/ZnO HNPs. These give them strong potentials in relevant applications, such as blue light emitting devices, environment remediation, drug delivery and release, energy storage and conversion, and sensors. The designed fabrication procedure is simple, feasible, and universal for a series of oxide and noble metal/oxide HNPs with controlled microstructure and improved performances.

Atomically Thin Arsenene and Antimonene: Semimetal–Semiconductor and Indirect–Direct Band-Gap Transitions†

The typical two-dimensional (2D) semiconductors MoS2, MoSe2, WS2, WSe2 and black phosphorus have garnered tremendous interest for their unique electronic, optical, and chemical properties. However, all 2D semiconductors reported thus far feature band gaps that are smaller than 2.0 eV, which has greatly restricted their applications, especially in optoelectronic devices with photoresponse in the blue and UV range. Novel 2D mono-elemental semiconductors, namely monolayered arsenene and antimonene, with wide band gaps and high stability were now developed based on first-principles calculations. Interestingly, although As and Sb are typically semimetals in the bulk, they are transformed into indirect semiconductors with band gaps of 2.49 and 2.28 eV when thinned to one atomic layer. Significantly, under small biaxial strain, these materials were transformed from indirect into direct band-gap semiconductors. Such dramatic changes in the electronic structure could pave the way for transistors with high on/off ratios, optoelectronic devices working under blue or UV light, and mechanical sensors based on new 2D crystals.

All‐Inorganic Colloidal Perovskite Quantum Dots: A New Class of Lasing Materials with Favorable Characteristics

All-inorganic colloidal cesium lead halide perovskite quantum dots (CsPbX3 , X = Cl, Br, I) are revealed to be a new class of favorable optical-gain materials, which show -combined merits of both colloidal quantum dots and halide perovskites. Low-threshold and -ultrastable stimulated emission is -demonstrated under atmospheric conditions with wavelength tunability across the whole -visible spectrum via either size or composition control.

A Comprehensive Review of One-Dimensional Metal-Oxide Nanostructure Photodetectors

One-dimensional (1D) metal-oxide nanostructures are ideal systems for exploring a large number of novel phenomena at the nanoscale and investigating size and dimensionality dependence of nanostructure properties for potential applications. The construction and integration of photodetectors or optical switches based on such nanostructures with tailored geometries have rapidly advanced in recent years. Active 1D nanostructure photodetector elements can be configured either as resistors whose conductions are altered by a charge-transfer process or as field-effect transistors (FET) whose properties can be controlled by applying appropriate potentials onto the gates. Functionalizing the structure surfaces offers another avenue for expanding the sensor capabilities. This article provides a comprehensive review on the state-of-the-art research activities in the photodetector field. It mainly focuses on the metal oxide 1D nanostructures such as ZnO, SnO2, Cu2O, Ga2O3, Fe2O3, In2O3, CdO, CeO2, and their photoresponses. The review begins with a survey of quasi 1D metal-oxide semiconductor nanostructures and the photodetector principle, then shows the recent progresses on several kinds of important metal-oxide nanostructures and their photoresponses and briefly presents some additional prospective metal-oxide 1D nanomaterials. Finally, the review is concluded with some perspectives and outlook on the future developments in this area.

50-Fold EQE Improvement up to 6.27% of Solution-Processed All-Inorganic Perovskite CsPbBr3 QLEDs via Surface Ligand Density Control.

Solution-processed CsPbBr3 quantum-dot light-emitting diodes with a 50-fold external quantum efficiency improvement (up to 6.27%) are achieved through balancing surface passivation and carrier injection via ligand density control (treating with hexane/ethyl acetate mixed solvent), which induces the coexistence of high levels of ink stability, photoluminescence quantum yields, thin-film uniformity, and carrier-injection efficiency.

Temperature-dependent shifts of three emission bands for ZnO nanoneedle arrays

The photoluminescence properties of ZnO nanoneedle arrays, grown on silicon substrate by electrodeposition, are studied over the temperatures from 10K to 300K. There exist three emission bands in ultraviolet, violet, and green regions, respectively. With increasing temperature, these bands show different temperature dependences: A normal redshift for the ultraviolet emission, S-shaped shift for the violet emission, and blueshift for the green one. The origins of these three bands and their temperature-dependent shifts are explained based on defect levels (zinc interstitial and oxygen vacancy levels) and carrier localization effect at the defect levels in addition to band-gap shrinkage.

Monolayer and Few-Layer All-Inorganic Perovskites as a New Family of Two-Dimensional Semiconductors for Printable Optoelectronic Devices.

Printed flexible photodetectors based on 2D inorganic perovskites with atomic thickness show excellent photosensing with fast rise and decay response times. As-synthesized nanosheets can easily be dispersed in various solvents, leading to large-area, crack-free, low-roughness, flexible films after printing. This study demonstrates that all-inorganic perovskite CsPbX3 nanosheets as a new class of 2D semiconductors have huge potential for flexible optoelectronic applications.

Nonlinear Absorption and Low-Threshold Multiphoton Pumped Stimulated Emission from All-Inorganic Perovskite Nanocrystals

Halide perovskite materials have attracted intense research interest due to the striking performance in photoharvesting photovoltaics as well as photoemitting applications. Very recently, the emerging CsPbX3 (X = Cl, Br, I) perovskite nanocrystals have been demonstrated to be efficient emitters with photoluminescence quantum yield as high as ∼90%, room temperature single photon sources, and favorable lasing materials. Herein, the nonlinear optical properties, in particular, the multiphoton absorption and resultant photoluminescence of the CsPbBr3 nanocrystals, were investigated. Notably, a large two-photon absorption cross-section of up to ∼1.2 × 10(5) GM is determined for 9 nm sized CsPbBr3 nanocrystals. Moreover, low-threshold frequency-upconverted stimulated emission by two-photon absorption was observed from the thin film of close-packed CsPbBr3 nanocrystals. The stimulated emission is found to be photostable and wavelength-tunable. We further realize the three-photon pumped stimulated emission in green spectra range from colloidal nanocrystals for the first time. Our results reveal the strong nonlinear absorption in the emerging CsPbX3 perovskite nanocrystals and suggest these nanocrystals as attractive multiphoton pumped optical gain media, which would offer new opportunities in nonlinear photonics and revive the nonlinear optical devices.

Violet photoluminescence from shell layer of Zn/ZnO core-shell nanoparticles induced by laser ablation

A strong violet photoluminescence (PL) band at 425nm (2.92eV) was observed from the ZnO shell layer of the Zn∕ZnO core-shell nanoparticles prepared by laser ablation in liquid media. Such violet PL decreases with increase of the shell thickness or annealing temperature, showing good controllability. Based on the electron paramagnetic resonance measurements, the violet emission is attributed to the electronic transition from the defect level, corresponding to high-concentration zinc interstitials, to the valence band. This study is in favor to clarify the defect-related emissions and to extend the optical and electronic applications of nanostructured ZnO.