Haifeng Lv

Monodisperse Au Nanoparticles for Selective Electrocatalytic Reduction of CO2 to CO

We report selective electrocatalytic reduction of carbon dioxide to carbon monoxide on gold nanoparticles (NPs) in 0.5 M KHCO3 at 25 °C. Among monodisperse 4, 6, 8, and 10 nm NPs tested, the 8 nm Au NPs show the maximum Faradaic efficiency (FE) (up to 90% at -0.67 V vs reversible hydrogen electrode, RHE). Density functional theory calculations suggest that more edge sites (active for CO evolution) than corner sites (active for the competitive H2 evolution reaction) on the Au NP surface facilitates the stabilization of the reduction intermediates, such as COOH*, and the formation of CO. This mechanism is further supported by the fact that Au NPs embedded in a matrix of butyl-3-methylimidazolium hexafluorophosphate for more efficient COOH* stabilization exhibit even higher reaction activity (3 A/g mass activity) and selectivity (97% FE) at -0.52 V (vs RHE). The work demonstrates the great potentials of using monodisperse Au NPs to optimize the available reaction intermediate binding sites for efficient and selective electrocatalytic reduction of CO2 to CO.

Active and Selective Conversion of CO2 to CO on Ultrathin Au Nanowires

In this communication, we show that ultrathin Au nanowires (NWs) with dominant edge sites on their surface are active and selective for electrochemical reduction of CO2 to CO. We first develop a facile seed-mediated growth method to synthesize these ultrathin (2 nm wide) Au NWs in high yield (95%) by reducing HAuCl4 in the presence of 2 nm Au nanoparticles (NPs). These NWs catalyze CO2 reduction to CO in aqueous 0.5 M KHCO3 at an onset potential of -0.2 V (vs reversible hydrogen electrode). At -0.35 V, the reduction Faradaic efficiency (FE) reaches 94% (mass activity 1.84 A/g Au) and stays at this level for 6 h without any noticeable activity change. Density functional theory (DFT) calculations suggest that the excellent catalytic performance of these Au NWs is attributed both to their high mass density of reactive edge sites (≥16%) and to the weak CO binding on these sites. These ultrathin Au NWs are the most efficient nanocatalyst ever reported for electrochemical reduction of CO2 to CO.

New Approach to Fully Ordered fct-FePt Nanoparticles for Much Enhanced Electrocatalysis in Acid

Fully ordered face-centered tetragonal (fct) FePt nanoparticles (NPs) are synthesized by thermal annealing of the MgO-coated dumbbell-like FePt-Fe3O4 NPs followed by acid washing to remove MgO. These fct-FePt NPs show strong ferromagnetism with room temperature coercivity reaching 33 kOe. They serve as a robust electrocatalyst for the oxygen reduction reaction (ORR) in 0.1 M HClO4 and hydrogen evolution reaction (HER) in 0.5 M H2SO4 with much enhanced activity (the most active fct-structured alloy NP catalyst ever reported) and stability (no obvious Fe loss and NP degradation after 20 000 cycles between 0.6 and 1.0 V (vs RHE)). Our work demonstrates a reliable approach to FePt NPs with much improved fct-ordering and catalytic efficiency for ORR and HER.

Metal–Organic Framework-Derived Bamboo-like Nitrogen-Doped Graphene Tubes as an Active Matrix for Hybrid Oxygen-Reduction Electrocatalysts

In this work, large size (i.e., diameter > 100 nm) graphene tubes with nitrogen-doping are prepared through a high-temperature graphitization process of dicyandiamide (DCDA) and Iron(II) acetate templated by a novel metal-organic framework (MIL-100(Fe)). The nitrogen-doped graphene tube (N-GT)-rich iron-nitrogen-carbon (Fe-N-C) catalysts exhibit inherently high activity towards the oxygen reduction reaction (ORR) in more challenging acidic media. Furthermore, aiming to improve the activity and stability of conventional Pt catalysts, the ORR active N-GT is used as a matrix to disperse Pt nanoparticles in order to build a unique hybrid Pt cathode catalyst. This is the first demonstration of the integration of a highly active Fe-N-C catalyst with Pt nanoparticles. The synthesized 20% Pt/N-GT composite catalysts demonstrate significantly enhanced ORR activity and H(2) -air fuel cell performance relative to those of 20% Pt/C, which is mainly attributed to the intrinsically active N-GT matrix along with possible synergistic effects between the non-precious metal active sites and the Pt nanoparticles. Unlike traditional Pt/C, the hybrid catalysts exhibit excellent stability during the accelerated durability testing, likely due to the unique highly graphitized graphene tube morphologies, capable of providing strong interaction with Pt nanoparticles and then preventing their agglomeration.

A New Core/Shell NiAu/Au Nanoparticle Catalyst with Pt-like Activity for Hydrogen Evolution Reaction.

We report a general approach to NiAu alloy nanoparticles (NPs) by co-reduction of Ni(acac)2 (acac = acetylacetonate) and HAuCl4·3H2O at 220 °C in the presence of oleylamine and oleic acid. Subject to potential cycling between 0.6 and 1.0 V (vs reversible hydrogen electrode) in 0.5 M H2SO4, the NiAu NPs are transformed into core/shell NiAu/Au NPs that show much enhanced catalysis for hydrogen evolution reaction (HER) with Pt-like activity and much robust durability. The first-principles calculations suggest that the high activity arises from the formation of Au sites with low coordination numbers around the shell. Our synthesis is not limited to NiAu but can be extended to FeAu and CoAu as well, providing a general approach to MAu/Au NPs as a class of new catalyst superior to Pt for water splitting and hydrogen generation.

High-Performance Rh2P Electrocatalyst for Efficient Water Splitting

The search for active, stable, and cost-efficient electrocatalysts for hydrogen production via water splitting could make a substantial impact on energy technologies that do not rely on fossil fuels. Here we report the synthesis of rhodium phosphide electrocatalyst with low metal loading in the form of nanocubes (NCs) dispersed in high-surface-area carbon (Rh2P/C) by a facile solvo-thermal approach. The Rh2P/C NCs exhibit remarkable performance for hydrogen evolution reaction and oxygen evolution reaction compared to Rh/C and Pt/C catalysts. The atomic structure of the Rh2P NCs was directly observed by annular dark-field scanning transmission electron microscopy, which revealed a phosphorus-rich outermost atomic layer. Combined experimental and computational studies suggest that surface phosphorus plays a crucial role in determining the robust catalyst properties.

Dual Electrical-Behavior Regulation on Electrocatalysts Realizing Enhanced Electrochemical Water Oxidation

Dual electrical-behavior regulation on electrocatalysts is proven to be an effective strategy for realizing enhanced electrochemical water oxidation. Electrical-behavior regulation opens up a promising avenue to design advanced electrocatalysts.

Peapod‐like Li3VO4/N‐Doped Carbon Nanowires with Pseudocapacitive Properties as Advanced Materials for High‐Energy Lithium‐Ion Capacitors

Lithium ion capacitors are new energy storage devices combining the complementary features of both electric double-layer capacitors and lithium ion batteries. A key limitation to this technology is the kinetic imbalance between the Faradaic insertion electrode and capacitive electrode. Here, we demonstrate that the Li3 VO4 with low Li-ion insertion voltage and fast kinetics can be favorably used for lithium ion capacitors. N-doped carbon-encapsulated Li3 VO4 nanowires are synthesized through a morphology-inheritance route, displaying a low insertion voltage between 0.2 and 1.0 V, a high reversible capacity of ≈400 mAh g-1 at 0.1 A g-1 , excellent rate capability, and long-term cycling stability. Benefiting from the small nanoparticles, low energy diffusion barrier and highly localized charge-transfer, the Li3 VO4 /N-doped carbon nanowires exhibit a high-rate pseudocapacitive behavior. A lithium ion capacitor device based on these Li3 VO4 /N-doped carbon nanowires delivers a high energy density of 136.4 Wh kg-1 at a power density of 532 W kg-1 , revealing the potential for application in high-performance and long life energy storage devices.

High stability platinum electrocatalysts with zirconia–carbon hybrid supports

A nano-ZrO2 shell was decorated successfully on the surface of carbon to improve the stability of an electrocatalyst. Pt nanoparticles (NPs) were formed on the support by an isothermal hydrolysis procedure. This composite was characterized by X-ray powder diffraction, thermogravimetric analysis, high-resolution transmission electron microscopy (HRTEM) with EDS and cyclic voltammogram techniques. HRTEM images show that the nano-ZrO2 shell has been decorated on the surface of carbon and 2–3 nm Pt NPs are dispersed on the carbon surface homogeneously, including the edge of the nano-ZrO2 shell. The electrochemical stability of the prepared Pt/ZrO2–C is enhanced considerably in comparison with a conventional Pt/C catalyst, which can be attributed to the inhibition of the migration and aggregation of Pt NPs on the support and the increase of the oxidation resistance of carbon with the nano-ZrO2 shell.

Promoting Active Species Generation by Electrochemical Activation in Alkaline Media for Efficient Electrocatalytic Oxygen Evolution in Neutral Media

In this study, by using dicobalt phosphide nanoparticles as precatalysts, we demonstrated that electrochemical activation of metallic precatalysts in alkaline media (comparing with directly electrochemical activation in neutral media) could significantly promote the OER catalysis in neutral media, specifically realizing a 2-fold enhanced activity and meanwhile showing a greatly decreased overpotential of about 100 mV at 10 mA cm-2. Compared directly with electrochemical activation in neutral media, the electrochemical activation in harsh alkaline media could easily break the strong Co-Co bond and promote active species generation on the surface of metallic Co2P, thus accounting for the enhancement of neutral OER activity, which is also evidenced by HRTEM and the electrochemical double-layer capacitance measurement. The activation of electrochemical oxidation of metallic precatalysts in alkaline media enhanced neutral OER catalysis could also be observed on CoP nanoparticles and Ni2P nanoparticles, suggesting this is a generic strategy. Our work highlights that the activation of electrochemical oxidation of metallic precatalysts in alkaline media would pave new avenues for the design of advanced neutral OER electrocatalysts.