Haifeng Yuan

Resonant plasmonic enhancement of single-molecule fluorescence by individual gold nanorods

Enhancing the fluorescence of a weak emitter is important to further extend the reach of single-molecule fluorescence imaging to many unexplored systems. Here we study fluorescence enhancement by isolated gold nanorods and explore the role of the surface plasmon resonance (SPR) on the observed enhancements. Gold nanorods can be cheaply synthesized in large volumes, yet we find similar fluorescence enhancements as literature reports on lithographically fabricated nanoparticle assemblies. The fluorescence of a weak emitter, crystal violet, can be enhanced more than 1000-fold by a single nanorod with its SPR at 629 nm excited at 633 nm. This strong enhancement results from both an excitation rate enhancement of ∼130 and an effective emission enhancement of ∼9. The fluorescence enhancement, however, decreases sharply when the SPR wavelength moves away from the excitation laser wavelength or when the SPR has only a partial overlap with the emission spectrum of the fluorophore. The reported measurements of fluorescence enhancement by 11 nanorods with varying SPR wavelengths are consistent with numerical simulations.

Thousand-fold enhancement of single-molecule fluorescence near a single gold nanorod

Single molecules: Large enhancements of single-molecule fluorescence up to 1100 times by using synthesized gold nanorods are reported (see picture). This high enhancement is achieved by selecting a dye with its adsorption and emission close to the surface plasmon resonance of the gold nanorods

Degradation of Methylammonium Lead Iodide Perovskite Structures through Light and Electron Beam Driven Ion Migration

Organometal halide perovskites show promising features for cost-effective application in photovoltaics. The material instability remains a major obstacle to broad application because of the poorly understood degradation pathways. Here, we apply simultaneous luminescence and electron microscopy on perovskites for the first time, allowing us to monitor in situ morphology evolution and optical properties upon perovskite degradation. Interestingly, morphology, photoluminescence (PL), and cathodoluminescence of perovskite samples evolve differently upon degradation driven by electron beam (e-beam) or by light. A transversal electric current generated by a scanning electron beam leads to dramatic changes in PL and tunes the energy band gaps continuously alongside film thinning. In contrast, light-induced degradation results in material decomposition to scattered particles and shows little PL spectral shifts. The differences in degradation can be ascribed to different electric currents that drive ion migration. Moreover, solution-processed perovskite cuboids show heterogeneity in stability which is likely related to crystallinity and morphology. Our results reveal the essential role of ion migration in perovskite degradation and provide potential avenues to rationally enhance the stability of perovskite materials by reducing ion migration while improving morphology and crystallinity. It is worth noting that even moderate e-beam currents (86 pA) and acceleration voltages (10 kV) readily induce significant perovskite degradation and alter their optical properties. Therefore, attention has to be paid while characterizing such materials using scanning electron microscopy or transmission electron microscopy techniques.

Visualization of molecular fluorescence point spread functions via remote excitation switching fluorescence microscopy

The enhancement of molecular absorption, emission and scattering processes by coupling to surface plasmon polaritons on metallic nanoparticles is a key issue in plasmonics for applications in (bio)chemical sensing, light harvesting and photocatalysis. Nevertheless, the point spread functions for single-molecule emission near metallic nanoparticles remain difficult to characterize due to fluorophore photodegradation, background emission and scattering from the plasmonic structure. Here we overcome this problem by exciting fluorophores remotely using plasmons propagating along metallic nanowires. The experiments reveal a complex array of single-molecule fluorescence point spread functions that depend not only on nanowire dimensions but also on the position and orientation of the molecular transition dipole. This work has consequences for both single-molecule regime-sensing and super-resolution imaging involving metallic nanoparticles and opens the possibilities for fast size sorting of metallic nanoparticles, and for predicting molecular orientation and binding position on metallic nanoparticles via far-field optical imaging.

Super-resolution Localization and Defocused Fluorescence Microscopy on Resonantly Coupled Single-Molecule, Single-Nanorod Hybrids

Optical antennas made of metallic nanostructures dramatically enhance single-molecule fluorescence to boost the detection sensitivity. Moreover, emission properties detected at the optical far field are dictated by the antenna. Here we study the emission from molecule–antenna hybrids by means of super-resolution localization and defocused imaging. Whereas gold nanorods make single-crystal violet molecules in the tip’s vicinity visible in fluorescence, super-resolution localization on the enhanced molecular fluorescence reveals geometrical centers of the nanorod antenna instead. Furthermore, emission angular distributions of dyes linked to the nanorod surface resemble that of nanorods in defocused imaging. The experimental observations are consistent with numerical calculations using the finite-difference time-domain method.

Photoluminescence Blinking of Single-Crystal Methylammonium Lead Iodide Perovskite Nanorods Induced by Surface Traps

Photoluminescence (PL) of organometal halide perovskite materials reflects the charge dynamics inside of the material and thus contains important information for understanding the electro-optical properties of the material. Interpretation of PL blinking of methylammonium lead iodide (MAPbI3) nanostructures observed on polycrystalline samples remains puzzling owing to their intrinsic disordered nature. Here, we report a novel method for the synthesis of high-quality single-crystal MAPbI3 nanorods and demonstrate a single-crystal study on MAPbI3 PL blinking. At low excitation power densities, two-state blinking was found on individual nanorods with dimensions of several hundred nanometers. A super-resolution localization study on the blinking of individual nanorods showed that single crystals of several hundred nanometers emit and blink as a whole, without showing changes in the localization center over the crystal. Moreover, both the blinking ON and OFF times showed power-law distributions, indicating trapping–detrapping processes. This is further supported by the PL decay times of the individual nanorods, which were found to correlate with the ON/OFF states. Furthermore, a strong environmental dependence of the nanorod PL blinking was revealed by comparing the measurements in vacuum, nitrogen, and air, implying that traps locate close to crystal surfaces. We explain our observations by proposing surface charge traps that are likely related to under-coordinated lead ions and methylammonium vacancies to result in the PL blinking observed here.

Communication: Crystallite nucleation in supercooled glycerol near the glass transition

Heterogeneity and solid-like structures found near the glass transition provide a key to a better understanding of supercooled liquids and of the glass transition. However, the formation of solid-like structures and its effect on spatial heterogeneity in supercooled liquids is neither well documented nor well understood. In this work, we reveal the crystalline nature of the solid-like structures in supercooled glycerol by means of neutron scattering. The results indicate that inhomogeneous nucleation happens at temperatures near T(g). Nevertheless, the thermal history of the sample is essential for crystallization. This implies such structures in supercooled liquids strongly depend on thermal history. Our work suggests that different thermal histories may lead to different structures and therefore to different length and time scales of heterogeneity near the glass transition.

Resolving Interparticle Heterogeneities in Composition and Hydrogenation Performance between Individual Supported Silver on Silica Catalysts.

Supported metal nanoparticle catalysts are commonly obtained through deposition of metal precursors onto the support using incipient wetness impregnation. Typically, empirical relations between metal nanoparticle structure and catalytic performance are inferred from ensemble averaged data in combination with high-resolution electron microscopy. This approach clearly underestimates the importance of heterogeneities present in a supported metal catalyst batch. Here we show for the first time how incipient wetness impregnation leads to 10-fold variations in silver loading between individual submillimeter-sized silica support granules. This heterogeneity has a profound impact on the catalytic performance, with 100-fold variations in hydrogenation performance at the same level. In a straightforward fashion, optical microscopy interlinks single support particle level catalytic measurements to structural and compositional information. These detailed correlations reveal the optimal silver loading. A thorough consideration of catalyst heterogeneity and the impact thereof on the catalytic performance is indispensable in the development of catalysts.

Perovskite seeding growth of formamidinium-lead-iodide-based perovskites for efficient and stable solar cells

Formamidinium-lead-iodide (FAPbI3)-based perovskites with bandgap below 1.55 eV are of interest for photovoltaics in view of their close-to-ideal bandgap. Record-performance FAPbI3-based solar cells have relied on fabrication via the sequential-deposition method; however, these devices exhibit unstable output under illumination due to the difficulty of incorporating cesium cations (stabilizer) in sequentially deposited films. Here we devise a perovskite seeding method that efficiently incorporates cesium and beneficially modulates perovskite crystallization. First, perovskite seed crystals are embedded in the PbI2 film. The perovskite seeds serve as cesium sources and act as nuclei to facilitate crystallization during the formation of perovskite. Perovskite films with perovskite seeding growth exhibit a lowered trap density, and the resulting planar solar cells achieve stabilized efficiency of 21.5% with a high open-circuit voltage of 1.13 V and a fill factor that exceeds 80%. The Cs-containing FAPbI3-based devices show a striking improvement in operational stability and retain 60% of their initial efficiency after 140 h operation under one sun illumination.Formamidinium-lead-iodide-based perovskites have a preferred bandgap below 1.55 eV for solar cell applications but suffer from operational instability. Here, Zhao et al. improve the film quality using cesium-containing seeded growth to show high stabilized efficiency and more than 100 h lifetime under simulated sunlight.

Plasmon-Mediated Surface Engineering of Silver Nanowires for Surface-Enhanced Raman Scattering

We reveal nanoscale morphological changes on the surface of a silver nanowire (AgNW) in the conventional surface-enhanced Raman scattering (SERS) measurement condition. The surface morphology changes are due to the surface plasmon-mediated photochemical etching of silver in the presence of certain Raman probes, resulting in a dramatic increase of Raman scattering intensity. This observation indicates that the measured SERS enhancement does not always originate from the as-designed/fabricated structures themselves, but sometimes with contribution from the morphological changes by plasmon-mediated photochemical reactions. Our work provides a guideline for more reliable SERS measurements and demonstrates a novel method for simple and site-specific engineering of SERS substrate and AgNW probes for designing and fabricating new SERS systems, stable and efficient TERS mapping, and single-cell SERS endoscopy.