Haixiang Yu

A label-free aptamer-fluorophore assembly for rapid and specific detection of cocaine in biofluids.

We report a rapid and specific aptamer-based method for one-step cocaine detection with minimal reagent requirements. The feasibility of aptamer-based detection has been demonstrated with sensors that operate via target-induced conformational change mechanisms, but these have generally exhibited limited target sensitivity. We have discovered that the cocaine-binding aptamer MNS-4.1 can also bind the fluorescent molecule 2-amino-5,6,7-trimethyl-1,8-naphthyridine (ATMND) and thereby quench its fluorescence. We subsequently introduced sequence changes into MNS-4.1 to engineer a new cocaine-binding aptamer (38-GC) that exhibits higher affinity to both ligands, with reduced background signal and increased signal gain. Using this aptamer, we have developed a new sensor platform that relies on the cocaine-mediated displacement of ATMND from 38-GC as a result of competitive binding. We demonstrate that our sensor can detect cocaine within seconds at concentrations as low as 200 nM, which is 50-fold lower than existing assays based on target-induced conformational change. More importantly, our assay achieves successful cocaine detection in body fluids, with a limit of detection of 10.4, 18.4, and 36 μM in undiluted saliva, urine, and serum samples, respectively.

Amplified single base-pair mismatch detection via aggregation of exonuclease-sheared gold nanoparticles.

Single nucleotide polymorphism (SNP) detection is important for early diagnosis, clinical prognostics, and disease prevention, and a rapid and sensitive low-cost SNP detection assay would be valuable for resource-limited clinical settings. We present a simple platform that enables sensitive, naked-eye detection of SNPs with minimal reagent and equipment requirements at room temperature within 15 min. SNP detection is performed in a single tube with one set of DNA probe-modified gold nanoparticles (AuNPs), a single exonuclease (Exo III), and the target in question. Exo III’s apurinic endonucleolytic activity differentially processes hybrid duplexes between the AuNP-bound probe and DNA targets that are perfectly matched or contain a single-base mismatch. For perfectly matched targets, Exo III’s exonuclease activity facilitates a process of target recycling that rapidly shears DNA probes from the particles, generating an AuNP aggregation-induced color change, whereas no such change occurs for mismatched targets. This color change is easily observed with as little as 2 nM of target, 100-fold lower than the target concentration required for reliable naked eye observation with unmodified AuNPs in well-optimized reaction conditions. We further demonstrate that this system can effectively discriminate a range of different mismatches.

Nanoprobe-Enhanced, Split Aptamer-Based Electrochemical Sandwich Assay for Ultrasensitive Detection of Small Molecules

It is quite challenging to improve the binding affinity of antismall molecule aptamers. We report that the binding affinity of anticocaine split aptamer pairs improved by up to 66-fold by gold nanoparticles (AuNP)-attached aptamers due to the substantially increased local concentration of aptamers and multiple and simultaneous ligand interactions. The significantly improved binding affinity enables the detection of small molecule targets with unprecedented sensitivity, as demonstrated in nanoprobe-enhanced split aptamer-based electrochemical sandwich assays (NE-SAESA). NE-SAESA replaces the traditional molecular reporter probe with AuNPs conjugated to multiple reporter probes. The increased binding affinity allowed us to use 1,000-fold lower reporter probe concentrations relative to those employed in SAESA. We show that the near-elimination of background in NE-SAESA effectively improves assay sensitivity by ∼1,000-100,000-fold for ATP and cocaine detection, relative to equivalent SAESA. With the ongoing development of new strategies for the selection of aptamers, we anticipate that our sensor platform should offer a generalizable approach for the high-sensitivity detection of diverse targets. More importantly, we believe that NE-SAESA represents a novel strategy to improve the binding affinity between a small molecule and its aptamer and potentially can be extended to other detection platforms.

Paper-Based Device for Rapid Visualization of NADH Based on Dissolution of Gold Nanoparticles

We describe a paper-based device that enables rapid and sensitive room-temperature detection of dihydronicotinamide adenine dinucleotide (NADH) via a colorimetric readout and demonstrate its value for monitoring NAD+-driven enzymatic reactions. Our system is based on NADH-mediated inhibition of gold nanoparticle (AuNPs) dissolution in a Au3+-cetyltrimethylammonium bromide (CTAB) solution. We fabricated a device consisting of a mixed cellulose ester paper featuring a wax-encircled, AuNP-coated film atop a cotton absorbent layer sandwiched between two plastic cover layers. In the absence of NADH, the Au3+-CTAB complex dissolves the AuNP layer completely, generating a white color in the test zone. In the presence of NADH, Au3+ is rapidly reduced to Au+, greatly decreasing the dissolution of AuNPs and yielding a red color that becomes stronger at increasing concentrations of NADH. This device exploits capillary force-assisted vertical diffusion, allowing us to apply a 25 μL sample to a surface-confined test zone to achieve a detection limit of 12.5 μM NADH. We used the enzyme glucose dehydrogenase as a model to demonstrate that our paper-based device can monitor NAD+-driven biochemical processes with and without selective dehydrogenase inhibitors by naked-eye observation within 4 min at room temperature in a small sample volume. We believe that our paper-based device could offer a valuable and low-cost analytical tool for monitoring NAD+-associated enzymatic reactions and screening for dehydrogenase inhibitors in a variety of testing contexts.

Ambient Filtration Method To Rapidly Prepare Highly Conductive, Paper-Based Porous Gold Films for Electrochemical Biosensing.

Thin gold films offer intriguing material properties for potential applications including fuel cells, supercapacitors, and electronic and photonic devices. We describe here an ambient filtration method that provides a simple and novel way to generate rapidly porous and thin gold films without the need for sophisticated instruments, clean-room environments, and any postgrowth process or sintering steps. Using this approach, we can fabricate highly conductive gold films composed of gold nanoparticles layered atop a matrix of metallic single-walled carbon nanotubes on mixed cellulose ester filter paper within 20 min. These hybrid films (thickness ∼40 nm) exhibit fast electron transfer and excellent electrocatalytic properties that are similar to purchased gold films, but with a larger electroactive surface that lends itself to more sensitive analyte detection. We used the neurotransmitters dopamine and serotonin as benchmark analytes to demonstrate that our hybrid gold films can clearly discriminate the presence of both molecules in a mixture with resolution that greatly exceeds that of either purchased gold slides or electrodeposited gold films. Importantly, we postulate that this new approach could readily be generalized for the rapid fabrication of films from various other metals under ambient conditions, and could also be used as a prelude to transferring the resulting films onto glass or other flexible substrates.

Sensitive Detection of Small-Molecule Targets Using Cooperative Binding Split Aptamers and Enzyme-Assisted Target Recycling

Signal amplification via enzyme-assisted target recycling (EATR) offers a powerful means for improving the sensitivity of DNA detection assays, but it has proven challenging to employ EATR with aptamer-based assays for small-molecule detection due to insensitive target response of aptamers. Here, we describe a general approach for the development of rapid and sensitive EATR-amplified small-molecule sensors based on cooperative binding split aptamers (CBSAs). CBSAs contain two target-binding domains and exhibit enhanced target response compared with single-domain split aptamers. We introduced a duplexed C3 spacer abasic site between the two binding domains, enabling EATR signal amplification through exonuclease IIIs apurinic endonuclease activity. As a demonstration, we engineered a CBSA-based EATR-amplified fluorescence assay to detect dehydroisoandrosterone-3-sulfate. This assay achieved 100-fold enhanced target sensitivity relative to a non-EATR-based assay, with a detection limit of 1 μM in 50% urine. We further developed an instrument-free colorimetric assay employing EATR-mediated aggregation of CBSA-modified gold nanoparticles for the visual detection of low-micromolar concentrations of cocaine. On the basis of the generalizability of CBSA engineering and the robust performance of EATR in complex samples, we believe that such assays should prove valuable for detecting small-molecule targets in diverse fields.

Introducing structure-switching functionality into small-molecule-binding aptamers via nuclease-directed truncation

Abstract We report a broadly applicable enzyme digestion strategy for introducing structure-switching functionality into small-molecule-binding aptamers. This procedure is based on our discovery that exonuclease III (Exo III) digestion of aptamers is greatly inhibited by target binding. As a demonstration, we perform Exo III digestion of a pre-folded three-way-junction (TWJ)-structured cocaine-binding aptamer and a stem–loop-structured ATP-binding aptamer. In the absence of target, Exo III catalyzes 3′-to-5′ digestion of both aptamers to form short, single-stranded products. Upon addition of target, Exo III digestion is halted four bases prior to the target-binding domain, forming a major target-bound aptamer digestion product. We demonstrated that target-binding is crucial for Exo III inhibition. We then determine that the resulting digestion products of both aptamers exhibit a target-induced structure-switching functionality that is absent in the parent aptamer, while still retaining high target-binding affinity. We confirm that these truncated aptamers have this functionality by using an exonuclease I-based digestion assay and further evaluate this characteristic in an electrochemical aptamer-based cocaine sensor and a fluorophore-quencher ATP assay. We believe our Exo III-digestion method should be applicable for the generation of structure-switching aptamers from other TWJ- or stem–loop-containing small-molecule-binding aptamers, greatly simplifying the generation of functionalized sensor elements for folding-based aptasensors.

In vitro isolation of small-molecule-binding aptamers with intrinsic dye-displacement functionality

Abstract Aptamer-based sensors offer a powerful tool for molecular detection, but the practical implementation of these biosensors is hindered by costly and laborious sequence engineering and chemical modification procedures. We report a simple strategy for directly isolating signal-reporting aptamers in vitro through systematic evolution of ligands by exponential enrichment (SELEX) that transduce binding events into a detectable change of absorbance via target-induced displacement of a small-molecule dye. We first demonstrate that diethylthiatricarbocyanine (Cy7) can stack into DNA three-way junctions (TWJs) in a sequence-independent fashion, greatly altering the dyes absorbance spectrum. We then design a TWJ-containing structured library and isolate an aptamer against 3,4-methylenedioxypyrovalerone (MDPV), a synthetic cathinone that is an emerging drug of abuse. This aptamer intrinsically binds Cy7 within its TWJ domain, but MDPV efficiently displaces the dye, resulting in a change in absorbance within seconds. This assay is label-free, and detects nanomolar concentrations of MDPV. It also recognizes other synthetic cathinones, offering the potential to detect newly-emerging designer drugs, but does not detect structurally-similar non-cathinone compounds or common cutting agents. Moreover, we demonstrate that the Cy7-displacement colorimetric assay is more sensitive than a conventional strand-displacement fluorescence assay. We believe our strategy offers an effective generalized approach for the development of sensitive dye-displacement colorimetric assays for other small-molecule targets.

No Structure-Switching Required: A Generalizable Exonuclease-Mediated Aptamer-Based Assay for Small-Molecule Detection

The binding of small molecules to double-stranded DNA can modulate its susceptibility to digestion by exonucleases. Here, we show that the digestion of aptamers by exonuclease III can likewise be inhibited upon binding of small-molecule targets and exploit this finding for the first time to achieve sensitive, label-free small-molecule detection. This approach does not require any sequence engineering and employs prefolded aptamers which have higher target-binding affinities than structure-switching aptamers widely used in current small-molecule detecting assays. We first use a dehydroisoandrosterone-3-sulfate-binding aptamer to show that target binding halts exonuclease III digestion four bases prior to the binding site. This leaves behind a double-stranded product that retains strong target affinity, whereas digestion of nontarget-bound aptamer produces a single-stranded product incapable of target binding. Exonuclease I efficiently eliminates these single-stranded products but is unable to digest the target-bound double-stranded product. The remaining products can be fluorescently quantified with SYBR Gold to determine target concentrations. We demonstrate that this dual-exonuclease-mediated approach can be broadly applied to other aptamers with differing secondary structures to achieve sensitive detection of various targets, even in biological matrices. Importantly, each aptamer digestion product has a unique sequence, enabling the creation of multiplex assays, and we successfully demonstrate simultaneous detection of cocaine and ATP in a single microliter volume sample in 25 min via sequence-specific molecular beacons. Due to the generality and simplicity of this assay, we believe that different DNA signal-reporting or amplification strategies can be adopted into our assay for target detection in diverse analytical contexts.

Dithiothreitol-Regulated Coverage of Oligonucleotide-Modified Gold Nanoparticles To Achieve Optimized Biosensor Performance

DNA-modified gold nanoparticles (AuNPs) are useful signal-reporters for detecting diverse molecules through various hybridization- and enzyme-based assays. However, their performance is heavily dependent on the probe DNA surface coverage, which can influence both target binding and enzymatic processing of the bound probes. Current methods used to adjust the surface coverage of DNA-modified AuNPs require the production of multiple batches of AuNPs under different conditions, which is costly and laborious. We here develop a single-step assay utilizing dithiothreitol (DTT) to fine-tune the surface coverage of DNA-modified AuNPs. DTT is superior to the commonly used surface diluent, mercaptohexanol, as it is less volatile, allowing for the rapid and reproducible controlling of surface coverage on AuNPs with only micromolar concentrations of DTT. Upon adsorption, DTT forms a dense monolayer on gold surfaces, which provides antifouling capabilities. Furthermore, surface-bound DTT adopts a cyclic conformation, which reorients DNA probes into an upright position and provides ample space to promote DNA hybridization, aptamer assembly, and nuclease digestion. We demonstrate the effects of surface coverage on AuNP-based sensors using DTT-regulated DNA-modified AuNPs. We then use these AuNPs to visually detect DNA and cocaine in colorimetric assays based on enzyme-mediated AuNP aggregation. We determine that DTT-regulated AuNPs with lower surface coverage achieve shorter reaction times and lower detection limits relative to those for assays using untreated AuNPs or DTT-regulated AuNPs with high surface coverage. Additionally, we demonstrate that our DTT-regulated AuNPs can perform cocaine detection in 50% urine without any significant matrix effects. We believe that DTT regulation of surface coverage can be broadly employed for optimizing DNA-modified AuNP performance for use in biosensors as well as drug delivery and therapeutic applications.