Haneef Ur Rehman

Degradation of complex carbohydrate: immobilization of pectinase from Bacillus licheniformis KIBGE-IB21 using calcium alginate as a support.

Pectinases are heterogeneous group of enzymes that catalyse the hydrolysis of pectin substances which is responsible for the turbidity and undesirable cloudiness in fruits juices. In current study, partially purified pectinase from Bacillus licheniformis KIBGE-IB21 was immobilized in calcium alginate beads. The effect of sodium alginate and calcium chloride concentration on immobilization was studied and it was found that the optimal sodium alginate and calcium chloride concentration was 3.0% and 0.2 M, respectively. It was found that immobilization increases the optimal reaction time for pectin degradation from 5 to 10 min and temperature from 45 to 55°C, whereas, the optimal pH remained same with reference to free enzyme. Thermal stability of enzyme increased after immobilization and immobilized pectinase retained more than 80% of its initial activity after 5 days at 30°C as compared with free enzyme which showed only 30% of residual activity. The immobilized enzyme also exhibited good operational stability and 65% of its initial activity was observed during third cycle. In term of pectinase immobilization efficiency and stability, this calcium alginate beads approach seemed to permit good results and can be used to make a bioreactor for various applications in food industries.

Immobilization of pectin degrading enzyme from Bacillus licheniformis KIBGE IB-21 using agar-agar as a support

Pectinase from Bacillus licheniformis KIBGE IB-21 was immobilized in agar-agar matrix using entrapment technique. Effect of different concentrations of agar-agar on pectinase immobilization was investigated and it was found that maximum immobilization was achieved at 3.0% agar-agar with 80% enzyme activity. After immobilization, the optimum temperature of enzyme increased from 45 to 50 °C and reaction time from 5 to 10 minutes as compared to free enzyme. Due to the limited diffusion of high molecular weight substrate, K(m) of immobilized enzyme slightly increased from 1.017 to 1.055 mg ml(-1), while Vmax decreased from 23,800 to 19,392 μM min(-1) as compared to free enzyme. After 120 h entrapped pectinase retained their activity up to 82% and 71% at 30 °C and 40 °C, respectively. The entrapped pectinase showed activity until 10th cycle and maintain 69.21% activity even after third cycle.

Polygalacturonase: production of pectin depolymerising enzyme from Bacillus licheniformis KIBGE IB-21.

Polygalacturonase is an enzyme that hydrolyzes external and internal α (1-4) glycosidic bonds of pectin to decrease the viscosity of fruits juices and vegetable purees. Several bacterial strains were isolated from soil and rotten vegetables and screened for polygalacturonase production. The strain which produced maximum polygalacturonase was identified Bacillus licheniformis on the basis of taxonomic studies and 16S rDNA analysis. The isolated bacterial strain produced maximum polygalacturonase at 37 °C after 48 h of fermentation. Among various carbon sources apple pectin (1.0%) showed maximum enzyme production. Different agro industrial wastes were also used as substrate in batch fermentation and it was found that wheat bran is capable of producing high yield of enzyme. Maximum polygalacturonase production was obtained by using yeast extract (0.3%) as a nitrogen source. It was observed that B. licheniformis KIBGE IB-21 is capable of producing 1015 U/mg of polygalacturonase at neutral pH.

Immobilization of pectin depolymerising polygalacturonase using different polymers.

Polygalacturonase catalyses the hydrolysis of pectin substances and widely has been used in food and textile industries. In current study, different polymers such as calcium alginate beads, polyacrylamide gel and agar-agar matrix were screened for the immobilization of polygalacturonase through entrapment technique. Polyacrylamide gel was found to be most promising one and gave maximum (89%) immobilization yield as compared to agar-agar (80%) and calcium alginate beads (46%). The polymers increased the reaction time of polygalacturonase and polymers entrapped polygalacturonases showed maximum pectinolytic activity after 10 min of reaction as compared to free polygalacturonase which performed maximum activity after 5.0 min of reaction time. The temperature of polygalacturonase for maximum enzymatic activity was increased from 45°C to 50°C and 55°C when it was immobilized within agar-agar and calcium alginate beads, respectively. The optimum pH (pH 10) of polygalacturonase was remained same when it was immobilized within polyacrylamide gel and calcium alginate beads, but changed from pH 10 to pH 9.0 after entrapment within agar-agar. Thermal stability of polygalacturonase was improved after immobilization and immobilized polygalacturonases showed higher tolerance against different temperatures as compared to free enzyme. Polymers entrapped polygalacturonases showed good reusability and retained more than 80% of their initial activity during 2nd cycles.

Continuous degradation of maltose by enzyme entrapment technology using calcium alginate beads as a matrix

Maltase from Bacillus licheniformis KIBGE-IB4 was immobilized within calcium alginate beads using entrapment technique. Immobilized maltase showed maximum immobilization yield with 4% sodium alginate and 0.2 M calcium chloride within 90.0 min of curing time. Entrapment increases the enzyme–substrate reaction time and temperature from 5.0 to 10.0 min and 45 °C to 50 °C, respectively as compared to its free counterpart. However, pH optima remained same for maltose hydrolysis. Diffusional limitation of substrate (maltose) caused a declined in Vmax of immobilized enzyme from 8411.0 to 4919.0 U ml−1 min−1 whereas, Km apparently increased from 1.71 to 3.17 mM ml−1. Immobilization also increased the stability of free maltase against a broad temperature range and enzyme retained 45% and 32% activity at 55 °C and 60 °C, respectively after 90.0 min. Immobilized enzyme also exhibited recycling efficiency more than six cycles and retained 17% of its initial activity even after 6th cycles. Immobilized enzyme showed relatively better storage stability at 4 °C and 30 °C after 60.0 days as compared to free enzyme.

Influence of phytic acid and its metal complexes on the activity of pectin degrading polygalacturonase.

Polygalacturonase is one of the important requirements of different microorganism to cause pathogenicity and spoilage of fruits and vegetables that involved in degradation of pectin during plant tissue infections. In current study, 20 mM phytic acid inhibited 70% activity of polygalacturonase. The effect of different concentration of metal ions such as Cu(+2), Al(+3) and V(+4) were studied separately and it was found that the 20 mM of these metal ions inhibited 37.2%, 79%, and 53% activity of polygalacturonase, respectively. Finally, the complexes of phytic acid and these metals ions were prepared and 1:1 ratio of phytic acid and metal ions complexes showed maximum inhibitory activity of enzyme as compared to complexes having 1:2 and 1:3 ratio except phytate-copper complexes which showed no inhibitory effect on the activity of polygalacturonase.