Haobo Tan

Design and Application of an Unattended Multifunctional H-TDMA System

The hygroscopic properties of aerosols have a significant impact on aerosol particle number size distributions (PNSD), formation of cloud condensation nuclei, climate forcing, and atmospheric visibility, as well as human health. To allow for the observation of the hygroscopic growth of aerosols with long-term accuracy, an unattended multifunctional hygroscopicity-tandem differential mobility analyzer (H-TDMA) system was designed and built by the Institute of Tropical and Marine Meteorology (ITMM), China Meteorological Administration (CMA), in Guangzhou, China. The system is capable of measuring dry and wet PNSD, hygroscopic growth factor by particle size, and mixing states. This article describes in detail the working principles,components, andcalibrationmethodsofthesystem.Standardpolystyrenelatex(PSL)sphereswithfive different diameters were chosen to test the system’s precision and accuracy of particle size measurement. Ammonium sulfate was used to test the hygroscopic response of the system for accurate growth factor measurement. The test results show that the deviation of the growth factor measured by the system is within a scope of 20.01 to 20.03 compared to K€ theoretical curves. Results of temperature and humidity control performancetestsindicatethatthesystemisrobust.Aninternaltemperaturegradientoflessthan0.2 Kforasecond differential mobility analyzer (DMA2) makes it possible to reach a set-point relative humidity (RH) value of 90% and with a standard deviation of 60.44%, sufficient for unattended field observation.

A vertical sounding of severe haze process in Guangzhou area

We detected a severe haze process in Guangzhou area with lidar and microwave radiometer, performed an inversion to get boundary layer height by wavelet covariance transform, and analyzed the correlation between meteorological factors of boundary layer and visibility from the perspective of dynamical and thermodynamic structures. Our results indicate that the boundary layer height shows significant daily changes, consistent with ground visibility variation. During the cleaning process, the boundary layer height exceeded 1 km; during severe haze, the height was only 500 m. Temperature gradient of 50–100 m, which was 30 h lag, was remarkably correlated with visibility, with the correlation coefficient of 0.77. High layer visibility (255 m) and low layer stability were significantly anticorrelation, and the maximum anticorrelation coefficient was up to −0.76 in cleaning days and −0.49 in haze days. In the related boundary layer meteorological factors, surface ventilation coefficient was linearly correlated with ground visibility, with the greatest correlation coefficient of 0.88. The correlation coefficients of boundary layer height, ground wind velocity, relative humidity and ground visibility were 0.76, 0.67, and −0.77, respectively. There was a strong correlation between different meteorological factors. The dominant meteorological factor during this haze process was surface ventilation coefficient. In the area without boundary layer height sounding, ground visibility and wind velocity could be used to estimate boundary layer height.

Characterization of Secondary Aerosol and its Extinction Effects on Visibility over the Pearl River Delta Region, China

Aerosol samples collected from July 2007 to March 2008 were used to obtain major aerosol constituents in an urban location in the Pearl River Delta Region (PRD), China. The minimum organic carbon (OC)/elemental carbon (EC) ratio was used to calculate the primary and secondary organic carbon and the extinction effect of the secondary aerosol on visibility was estimated. As indicated in the analysis, the mass of secondary aerosol takes up 50% of the total mass of PM2.5; the OC/EC ratio is larger than 2 and there are significant characteristics of secondary aerosol generation; the levels of secondary OC are comparable with those of sulfate; and there is obvious enrichment of secondary aerosol on more polluted days. In a dry environment, the extinction weight is 59% for the secondary aerosol, while it is as high as 82% if the environment is highly humid (relative humidity [RH] = 95%). The hygroscopic growth of the aerosol can reduce visibility greatly; the secondary aerosol shares much larger quotas on more polluted days. For the Pearl River Delta (PRD), secondary aerosol and carbonaceous aerosol, especially secondary organic carbon (SOC), are a very acute problem; the study of the generating mechanism and sources for secondary aerosol is the key to the effort of controlling visibility in this region. The equation set forth in IMPROVE experiments can only be referenced but is not applicable to evaluate the extinction effect of individual aerosol components on visibility in the PRD region. Implications: The extinction effects on visibility by different constituents are studied in this work using compositional data derived from the measurements, with special efforts on examining the extinction of secondary aerosol and the enrichment and extinction contributions of the constituents with the variation of pollution level and relative humidity, so as to provide a scientific basis for the mitigation of atmospheric aerosol pollution and improving visibility in the PRD of China.

A Study of a Retrieval Method for Temperature and Humidity Profiles from Microwave Radiometer Observations Based on Principal Component Analysis and Stepwise Regression

Abstract This paper discusses the application of principal component analysis and stepwise regression in the retrieval of vertical profiles of temperature and humidity based on the measurements of a 35-channel microwave radiometer. It uses the radiosonde data of 6 yr from Hong Kong, China, and the monochromatic radiative transfer model (MonoRTM) to calculate the brightness temperatures of the 35 channels of the radiometer. The retrieval of the atmospheric profile is then established based on principal component analysis and stepwise regression. The accuracy of the retrieval method is also analyzed. Using an independent sample, the root-mean-square error of the retrieved temperature is less than 1.5 K, on average, with better retrieval results in summer than in winter. Likewise, the root-mean-square error of the retrieved water vapor density reaches a maximum value of 1.4 g m−3 between 0.5 and 2 km, and is less than 1 g m−3 for all other heights. The retrieval method is then applied to the actual measured ...

A Modeling Study of Impact of Emission Control Strategies on PM2.5 Reductions in Zhongshan, China, Using WRF-CMAQ

A WRF-CMAQ modeling system is used to assess the impact of emission control strategies and weather conditions on haze pollution in Zhongshan, Guangdong Province, China. One-month simulations for January 2014 are completed and evaluated with the observational data. The simulations show reasonable agreement with the observations. Several sensitivity studies are completed to quantify the percentage contributions of local emissions versus regional emissions to the PM2.5 concentrations under different weather conditions. The results indicate that the contributions from local emission is higher than those of the emissions from regional transport when there is no intrusion of cold front (i.e., 58% contribution from local emission versus 42% contribution from the regional transport). The contribution of regional transport is increased to 76% when a strong cold front appears. Furthermore, the sensitivity study demonstrates that PM2.5 concentrations on the first, second, and third days are reduced by 47%, 52%, and 58%, respectively, after the local emissions are turned off when there is no intrusion of cold front. Finally, a case study shows that industrial, residential, and mobile emissions account for 24%, 22%, and 15% of the change of PM2.5, respectively, during a heavy haze pollution event in Zhongshan.

Real time analysis of lead-containing atmospheric particles in Guangzhou during wintertime using single particle aerosol mass spectrometry

The toxic effects of lead on human health and the environment have long been a focus of research. To explore sources of lead in Guangzhou, China, we investigated atmospheric lead-containing particles (LCPs) during wintertime using a single particle aerosol mass spectrometer (SPAMS). Based on mass spectral features, LCPs were classified into eight major particle types, including Pb-Cl and Pb-Cl-Li (coal combustion and waste incineration), Pb-Cl-EC and Pb-Cl-OC (diesel trucks and coal combustion), Pb-Cl-Fe (iron and steel industry), Pb-Cl-AlSi (dust), Pb-Sec (secondary formation), and Pb-Cl-Zn (industrial process); these sources (in parentheses) were identified by comparing atmospheric LCP mass spectra with authentic Pb emission source mass spectra. Sampling periods with LCP number fractions (NFs) more than three times the average LCP NF (APF = 4.35%) and below the APF were defined as high LCP NF periods (HLFPs: H1, H3, and H5) and low LCP NF APF periods (LLFPs: L2 and L4), respectively. Diurnal patterns and high Pb-Sec content during LLFPs indicate that photochemical activity and heterogeneous reactions may have controlled Pb-Sec particle formation. The inverse Pb-Cl and Pb-Sec particle diurnal trends during LLFPs suggest the replacement of Cl by sulfate and nitrate. On average over the five periods, ~ 76% of the LCPs likely arose from coal combustion and/or waste incineration, which were dominant sources during all five periods, followed by diesel trucks during LLFPs and iron- and steel-related sources during HLFPs; HLFP LCPs arose mainly from primary emissions. These results can be used to more efficiently control Pb emission sources and prevent harm to human and environmental health from Pb toxicity.