Haowen Huang

Ultra-sensitive detection of cysteine by gold nanorod assembly.

In this paper, we have developed a simple, rapid, selective, and ultra-sensitive assay to detect cysteine by means of gold nanorods assembly. This methodology is based on the end-to-end assembly of gold nanorods and it is very sensitive due to the useful formation of the gold nanorods chain in the presence of cysteine under acidic aqueous solution. The sharp absorption peak changes observed from the assembly formed by the gold nanorods allow one to monitor very subtle differences induced by cysteine in an acidic medium and therefore, it can provide a quantitative measure of the cysteine concentration. On the other hand, the high extinction coefficients of gold nanorods allow one to monitor the changes at lower concentrations compared to that accomplished by conventional absorbance-based chromophores. Therefore, one of the significant features is the ability to detect cysteine in the presence of other essential alpha-amino acids at concentrations as low as 10 pM, which to the best of our knowledge is the lowest reported for a colorimetric cysteine detection system. More importantly, this assay is particularly attractive because it does not rely on organic cosolvents, enzymatic reactions, light-sensitive dye molecules, lengthy protocols, and sophisticated instrumentation.

A novel label-free multi-throughput optical biosensor based on localized surface plasmon resonance

A novel and sensitive multi-throughput localized surface plasmon resonance (MLSPR) biosensor was developed for the first time. Various gold nanorods with different aspect ratios were used to fabricate the optical sensor. Five kinds of gold nanorods with different aspect ratios were chosen to construct five throughputs of MLSPR. Various LSPR peaks imply that different acceptor-ligand pairs can be detected simultaneously in the wavelength range from 530 to 940nm. The biosensor immobilized on glass slides was applied to label-free detection between acceptor and ligand. The MLSPR-based optical biosensor can be used to detect three antigen-antibody pairs simultaneously. The biosensor proposed herein is easy to fabricate, and its operation procedure is convenient as labeling procedure is unnecessary.

A novel method for iodate determination using cadmium sulfide quantum dots as fluorescence probes

We have developed a novel method for the determination of iodate based on the carboxymethyl cellulose-capped CdS quantum dots (QDs). Factors affecting the iodate detection were investigated, and the optimum conditions were determined. Under the optimum conditions, the relative fluorescence intensity of CdS quantum dots was linearly proportional to IO(3)(-) over a concentration range from 1.0 × 10(-8) to 1.0 × 10(-5) mol L(-1) with a correlation coefficient of 0.9987 and a detection limit of 6.0 nmol L(-1). Iodide, being oxidized by bromine to form iodate, was detected indirectly. The method was successfully applied to the determination of iodate and total amount of iodine in table salt samples. The related mechanism was also discussed.

Amplification of localized surface plasmon resonance signals by a gold nanorod assembly and ultra-sensitive detection of mercury

Controlled assembly of gold nanorods induced by Na(3)PO(4) leads to a significant amplification of localized surface plasmon resonance (LSPR) signals. The strong affinity between Au and Hg alters the coupled LSPR signals due to the amalgamation of Hg and Au. This allows detection of Hg in aqueous solutions with ultra-high sensitivity and excellent selectivity, without sample pretreatment.

Label-free optical biosensor based on localized surface plasmon resonance of immobilized gold nanorods

We describe the fabrication and characterization of a localized surface plasmon resonance (LSPR) biosensor that utilizes gold nanorods immobilized as the optical transducer which requires the intensity change at a single wavelength to be monitored as a function of receptor-analyte binding at the nanorod surface. In contrary to free gold nanorods suspended in an aqueous solution with high sensitivity to the longitudinal plasmon wavelength to the surrounding environment, the intensity of the longitudinal plasmon band based on immobilized gold nanorods is more sensitive to changes in the surrounding dielectric properties than the change in the longitudinal plasmon wavelength. Quantitative calculation gives a linear equation between the concentration (X) of the test sample and intensity of LPB (Y) as Y=0.0881+12.9502X and 0.1 pM anti-goat can be detected using this IgG probe in this study. This sensor chip made of immobilized gold nanorods is very stable. The immobilized gold nanorods preserved under 4 degrees C for 1 year yield almost the same extinction spectrum as the original nanorods. This study reveals a reliable and sensitive method to measure the intensity of longitudinal plasmon bands based on the highly stable LSPR substrate. Moreover, the performance is comparable to dynamic SPR measurements in immunoassays and can monitor the receptor-analyte reactions in real time.

Optical and biological sensing capabilities of Au2S/AuAgS coated gold nanorods.

Gold nanorods coated with a multiplex component, namely Au(2)S/AuAgS coated gold nanorods, are produced without precipitation and aggregation among the nanorods. Both the thickness of the shell and size of the core can be readily controlled by this technique allowing one to tune the plasmon resonance of the nanocomposites over a range of several hundred nanometers. These Au(2)S/AuAgS coated gold nanorods exhibit interesting optical properties and are suitable for many biological sensing applications. Functionalization of the Au(2)S/AuAgS coated gold nanorods is achieved by manipulating the affinity between the Au(2)S/AuAgS and thiol compounds. Biomolecules can be covalently attached via the NH(2) bond of the antibodies to the NHS-terminated nanorods. The longitudinal peaks of the Au(2)S/AuAgS coated gold nanorods are extremely sensitive to the refractive index changes induced by target binding, suggesting that they are excellent sensors for target-specific binding events and have the potential to achieve single-molecule sensitivity in microspectroscopy.

Multiplex plasmonic sensor for detection of different metal ions based on a single type of gold nanorod.

In this paper, a label-free multiplex plasmonic sensor has been developed to selectively determine different metal ions including Fe(3+), Hg(2+), Cu(2+), and Ag(+) ions based on a single type of gold nanorod (GNR). Under proper conditions, these metal ions can react with GNRs, resulting in changes of nanostructure and composition. The determination of Fe(3+), Hg(2+), Cu(2+), and Ag(+) ions is therefore readily implemented due to changes of longitudinal plasmon wavelength (LPW) of nanorods. Moreover, the GNR-based assay can not only determine all four kinds of metal ions successively but also can detect which of any one or several kinds of metal ions. This assay is sensitive to detect Fe(3+), Hg(2+), Cu(2+), and Ag(+) as low as 10(-6), 10(-8), 10(-10), and 10(-8) M, respectively. Importantly, the special nanostructure and composition of the nanorods are induced by these metal ions, which allow this sensor to maintain high selectivity to determine these metal ions. This nanosensor abrogates the need for complicated chemosensors or sophisticated equipment, providing a simple and highly selective detection platform.

Study of the interaction between N-confused porphyrin and bovine serum albumin by fluorescence spectroscopy

The fluorescence and ultraviolet spectroscopy were explored to study the interaction between N-confused porphyrins (NCP) and bovine serum albumin (BSA) under imitated physiological condition. The experimental results indicated that the fluorescence quenching mechanism between BSA and NCP was static quenching procedure at low NCP concentration at 293 and 305 K or a combined quenching (static and dynamic) procedure at higher NCP concentration at 305 K. The binding constants, binding sites and the corresponding thermodynamic parameters ΔH, ΔS, and ΔG were calculated at different temperatures. The comparison of binding potency of the three NCP to BSA showed that the substituting groups in benzene ring could enhance the binding affinity. From the thermodynamic parameters, we concluded that the action force was mainly hydrophobic interaction. The binding distances between NCP and BSA were calculated using Förster non-radiation energy transfer theory. In addition, the effect of NCP on the conformation of BSA was analyzed using synchronous fluorescence spectroscopy.

Preparation of controllable core-shell gold nanoparticles and its application in detection of silver ions.

We report a novel shell technique to prepare controllable core-shell nanoparticles. In this technique, the shell is formed when the core reacts with metal ions and Na(2)S(2)O(3) and the size of the core and thickness of the shell can be controlled. Transmission electron microscopy and X-ray diffraction reveal that the shell consists of insoluble complex salts comprising Au(2)S, AuAgS, and Ag(3)AuS(2). The resulting core-shell nanoparticles obtained at different reaction stages demonstrate that the formation of Au(2)S, AuAgS, and Ag(3)AuS(2) shell proceeds from the outside. The morphological evolution of the particles changes significantly with reaction time demonstrating that formation of the shell results from diffusion in the solid shell. The core-shell nanoparticles produced by this technique can be used as nanosensors to detect Ag(+) in aqueous media with high selectivity and sensitivity. The excellent selectivity for Ag(+) is demonstrated by comparing the response to other metal ions. In addition, our evaluation indicates that gold nanorods offer higher sensitivity than gold nanospheres.

Study on the interaction between salvianic acid A sodium and bovine serum albumin by spectroscopic methods.

The interaction between salvianic acid A sodium (SAS) and bovine serum albumin (BSA) was investigated using fluorescence and ultraviolet spectroscopy at different temperatures under imitated physiological conditions. The experimental results showed that the fluorescence of BSA was quenched by SAS through a static quenching procedure. The binding constants of SAS with BSA were 2.03, 1.17 and 0.71×10(5) L mol(-1) at 291, 298 and 305 K, respectively. Negative values of ΔG, ΔH, and ΔS indicate that the interaction between SAS and BSA is driven by hydrogen bonds and van der Waals forces. According to Förster non-radiation energy transfer theory, the binding distance between BSA and SAS was calculated to be about 2.92 nm. The effect of SAS on the conformation of BSA was analyzed using synchronous fluorescence spectroscopy. In addition, the effect of some metal ions Cu(2+), Ca(2+), Mg(2+), and Zn(2+) on the binding constant between SAS and BSA was examined.