Network


Latest external collaboration on country level. Dive into details by clicking on the dots.

Hotspot


Dive into the research topics where Harald Essig is active.

Publication


Featured researches published by Harald Essig.


International Journal of Oral and Maxillofacial Surgery | 2010

Prefabrication of vascularized bioartificial bone grafts in vivo for segmental mandibular reconstruction: experimental pilot study in sheep and first clinical application

Horst Kokemueller; S. Spalthoff; M. Nolff; Frank Tavassol; Harald Essig; Constantin Stuehmer; Kai-Hendrik Bormann; Martin Rücker; Nils-Claudius Gellrich

The key elements for bioartificial bone formation in 3D matrices are large numbers of osteogenic cells and supplies of oxygen and nutrition. Vascularization becomes more important with the increasing size and complexity of seeded scaffolds required for clinical application in reconstructive craniomaxillofacial surgery. Prefabrication of vascularized bioartificial bone grafts in vivo might be an alternative to in vitro tissue engineering techniques. Two cylindrical beta-TCP-scaffolds (25 mm long) were intraoperatively filled with autogenous bone marrow from the iliac crest for cell loading and implanted into the latissimus dorsi muscle in 12 sheep. To determine the effect of axial perfusion, one scaffold in each sheep was surgically supplied with a central vascular bundle. Sheep were killed 3 months after surgery. Histomorphometric analysis showed autogenous bone marrow from the iliac crest was an effective source of osteogenic cells and growth factors, inducing considerable ectopic bone growth in all implanted scaffolds. Bone growth, ceramic resorption and angiogenesis increased significantly with axial perfusion. The results encourage the application of prefabricated bioartificial bone for segmental mandibular reconstruction in man. In clinical practice, vascularized bioartificial bone grafts could change the principles of bone transplantation with minimal donor site morbidity and no shape or volume limitations.


Journal of Craniofacial Surgery | 2008

Computer-assisted navigation in craniomaxillofacial tumors.

Alexander Schramm; Maria Mercedes Suarez-Cunqueiro; Enno Ludwig Barth; Harald Essig; Kai-Hendrik Bormann; Horst Kokemueller; Martin Rücker; Nils-Claudius Gellrich

Surgical procedures in the head and neck region require a detailed knowledge of this regions complex anatomy. Anatomic changes due to tumor growth present special challenges for the surgeon. In addition to the clinical examination, which is still of fundamental importance, imaging procedures such as computer-aided surgical navigation technology are currently being used in the preoperative, intraoperative, and postoperative assessments of anatomic changes. For purposes of analysis, we have analyzed the application of navigation technology into 2 categories: 1) minimally invasive procedure and biopsy; and 2) resection of extensive tumors and reconstruction after tumor surgery. Navigation can make tumor surgery more reliable by specifying correct safety margins, protecting vital structures, and facilitating the reconstruction process.


Head & Neck Oncology | 2011

Reconstruction of mandibular defects - clinical retrospective research over a 10-year period -

Majeed Rana; Riaz Ahmed Warraich; Horst Kokemüller; Juliane Lemound; Harald Essig; Frank Tavassol; A. Eckardt; Nils-Claudius Gellrich

BackroundFunctional and cosmetic defects in the maxillofacial region are caused by various ailments and these defects are addressed according to their need. Simplicity of procedure, intact facial function and esthetic outcome with the least possible donor site morbidity are the minimum requirements of a good reconstruction. Oro-mandibular reconstruction, although a challenge for the head and neck reconstructive surgeon, is now reliable and highly successful with excellent long-term functional and aesthetic outcomes with the use of autogenous bone grafts. Reconstruction of trauma- or mandibular oncologic defects with bony free flaps is considered the gold standard. However the the optimal reconstruction of mandibular defects is still controversial in regards to reconstructive options which include the donor site selection and the timing of surgery. The purpose of this study was to determine the outcome of different osseous reconstruction options using autogenous bone grafts for mandibular reconstructions.MethodsThis study was carried out on 178 patients with mandibular bone defects. They were reconstructed with autogenous bone grafts from different donor sites. At post operative visits they were evaluated for functional and cosmetic results.ResultsThe success rate found in this study was around 90%. Only 7.6% of the cases showed poor results regarding facial contours and mouth opening. All other patients were satisfied with their cosmesis and mouth opening at the recipient sites was in the normal range during last follow-up visits. Donor sites were primarily closed in all cases and there was no hypertrophic scar.ConclusionBased on this study, autogenous bone grafts are a reliable treatment modality for the reconstruction of mandibular bone defects with predictable aesthetic and functional outcomes. As the free vascularized fibular flap has the least resorption and failure rate, it should be the first choice for most cases of mandiblular reconstruction.


International Journal of Oral and Maxillofacial Surgery | 2008

Cone beam CT imaging of airgun injuries to the craniomaxillofacial region

Constantin Stuehmer; Harald Essig; Kai-Hendrik Bormann; O. Majdani; Nils-Claudius Gellrich; Martin Rücker

In airgun injuries, the removal of the projectile is often recommended. The material properties of airgun projectiles make it difficult to determine their precise anatomical location using conventional radiological techniques. Conventional X-rays give only a two-dimensional representation of projectiles and do not allow a foreign object to be located precisely. Multi-slice computed tomography (CT) has become a standard tool in diagnosis. Metal objects can cause artefacts in CT scans and make it difficult to identify adjacent anatomical structures. By contrast, cone-beam CT (CBCT) provides three-dimensional images largely free from metal artefacts. The authors present three cases of airgun injuries and discuss the diagnostic and treatment approaches used. CBCT has proved to be a useful diagnostic tool in planning the treatment of craniofacial airgun injuries. It is superior to CT in detecting hard-tissue structural damage in the immediate vicinity of high-density metal projectiles.


Head & Neck Oncology | 2011

Pre-operative planning for mandibular reconstruction - A full digital planning workflow resulting in a patient specific reconstruction

Harald Essig; Majeed Rana; Horst Kokemueller; Constantin von See; Martin Ruecker; Frank Tavassol; Nils-Claudius Gellrich

ObjectivesReconstruction of large mandiblular defects following ablative oncologic surgery could be done by using vascularized bone transfer or, more often, primarily with simultaneous or delayed bone grafting, using load bearing reconstruction plates. Bending of these reconstruction plates is typically directed along the outer contour of the original mandible. Simultaneously or in a second operation vascularized or non-vascularized bone is fixed to the reconstruction plate. However, the prosthodontic-driven backward planning to ease bony reconstruction of the mandible in terms of dental rehabilitation using implant-retained overdentures might be an eligible solution. The purpose of this work was to develop, establish and clinically evaluate a novel 3D planning procedure for mandibular reconstruction.Materials and methodsThree patients with tumors involving the mandible, which included squamous cell carcinoma in the floor of the mouth and keratocystic odontogenic tumor, were treated surgically by hemimandibulectomy.ResultsIn primary alloplastic mandible reconstruction, shape and size of the reconstruction plate could be predefined and prebent prior to surgery.Clinical relevanceThis study provides modern treatment strategies for mandibular reconstruction.


Journal of Biomedical Materials Research Part A | 2010

Effects of VEGF loading on scaffold-confined vascularization

Daniel Lindhorst; Frank Tavassol; Constantin von See; Paul Schumann; Matthias W. Laschke; Yves Harder; Kai-Hendrik Bormann; Harald Essig; Horst Kokemüller; Andreas Kampmann; André Voss; Rolf Mülhaupt; Michael D. Menger; Nils-Claudius Gellrich; Martin Rücker

Adequate vascularization of tissue-engineered constructs remains a major challenge in bone grafting. In view of this, we loaded ß-tricalcium-phosphate (ß-TCP) and porous poly(L-lactide-co-glycolide) (PLGA) scaffolds via collagen coating with vascular endothelial growth factor (VEGF) and studied whether the VEGF loading improves scaffold angiogenesis and vascularization. Dorsal skinfold chambers were implanted into 48 balb/c mice, which were assigned to 6 groups (n = 8 each). Uncoated (controls), collagen-coated, and additionally VEGF-loaded PLGA and ß-TCP scaffolds were inserted into the chambers. Angiogenesis, neovascularization, and leukocyte-endothelial cell interaction were analyzed repeatedly during a 14-day observation period using intravital fluorescence microscopy. Furthermore, VEGF release from PLGA und ß-TCP scaffolds was studied by ELISA. Micromorphology was studied from histological specimens. Unloaded ß-TCP scaffolds showed an accelerated and increased angiogenic response when compared with unloaded PLGA scaffolds. In vitro, PLGA released significantly higher amounts of VEGF compared with ß-TCP at the first two days resulting in a rapid drop of the released amount at the following days up to day 7 where the VEGF release was negligible. Nonetheless, in vivo VEGF loading increased neovascularization, especially in ß-TCP scaffolds. This increased vascularization was associated with a temporary leukocytic response with pronounced leukocyte-endothelial cell interaction at days 3 and 6. Histology revealed adequate host tissue response and engraftment of both ß-TCP and PLGA scaffolds. Our study demonstrates that ß-TCP scaffolds offer more suitable conditions for vascularization than PLGA scaffolds, in particular if they are loaded with VEGF.


Journal of Craniofacial Surgery | 2012

Advances and innovations in computer-assisted head and neck oncologic surgery.

Majeed Rana; Harald Essig; A. Eckardt; Frank Tavassol; Martin Ruecker; Alexander Schramm; Nils-Claudius Gellrich

Abstract Over the past years, computer-assisted surgery has gained more importance in craniomaxillofacial surgery, especially in primary and secondary treatment of head and neck malignancies. The basis for oncologic treatment of the head and neck region requires detailed planning using computed tomography, cone-beam computed tomography, or magnetic resonance imaging in combination with computer-assisted, infrared-based navigation system. These techniques allow a preplanned image-guided path to the tumor region for taking biopsies, resection, or reconstruction. The aim of this work was to show the advances and technical benefits for tumor surgery in a daily clinical routine from the view of the craniomaxillofacial surgeon. The target of our working group was to develop and clinically evaluate a novel three-dimensional planning and navigation software solution for treatment of craniofacial tumors. This work was carried out on 5 categories for oncologic surgical procedures in which computer-assisted surgery was applied from 2005 to 2011: preplanned trajectorial-guided tumor biopsy, intraoperative image–controlled tumor resection, tumor mapping, reconstruction after tumor surgery (true to original), and oral rehabilitation (backward planning). Successful preoperative planning, import of image data suitable for navigation, and intraoperative precise infrared-based navigation were obtained for all 5 categories without any complications. Image-guided navigation technique for head and neck oncologic surgery provides a precise, safe surgical method with real-time excellent anatomic orientation. Regarding the advantages of computer-assisted surgery, this technique will play a major part in craniofacial reconstructive surgery and will address widespread general methodologic solutions that are of great interest in multidisciplinary oncologic treatment.


Journal of Cranio-maxillofacial Surgery | 2015

Splintless orthognathic surgery: A novel technique using patient- specific implants (PSI)

Thomas Gander; Marius Bredell; Theodore Eliades; Martin Rücker; Harald Essig

In the past few years, advances in three-dimensional imaging have conducted to breakthrough in the diagnosis, treatment planning and result assessment in orthognathic surgery. Hereby error-prone and time-consuming planning steps, like model surgery and transfer of the face bow, can be eluded. Numerous positioning devices, in order to transfer the three-dimensional treatment plan to the intraoperative site, have been described. Nevertheless the use of positioning devices and intraoperative splints are failure-prone and time-consuming steps, which have to be performed during the operation and during general anesthesia of the patient. We describe a novel time-sparing and failsafe technique using patient-specific implants (PSI) as positioning guides and concurrently as rigid fixation of the maxilla in the planned position. This technique avoids elaborate positioning and removal of manufactured positioning devices and allows maxillary positioning without the use of occlusal splints.


Journal of Oral and Maxillofacial Surgery | 2012

Endoscope-assisted transoral reduction and internal fixation versus closed treatment of mandibular condylar process fractures--a prospective double-center study.

Horst Kokemueller; Vitomir S. Konstantinović; Enno-Ludwig Barth; Sabine Goldhahn; Constantin von See; Frank Tavassol; Harald Essig; Nils-Claudius Gellrich

PURPOSE The aim of this international AO-study was to compare the functional outcome after open versus closed treatment of mandibular condylar neck fractures. PATIENTS AND METHODS A prospective comparative study with two follow-ups (FU) at 8-12 weeks and 1 year was undertaken in two clinics, which exclusively privileged either surgical or conservative treatment due to different therapeutic agendas. Patients from clinic 1 (ENDO group) received endoscope-assisted transoral open reduction and internal fixation, whereas patients from clinic 2 (CONS group) were treated conservatively without surgery. Patients with unilateral condylar neck fractures showing one or more of the following conditions were included: displacement of the condyle with an inclination >30° and/or severe functional impairment such as malocclusion or open bite, with or without dislocation of the condylar fragment; severe pain upon palpation or movement, and/or vertical shortening of the ascending ramus. High or intracapsular condylar neck fractures were excluded. RESULTS 75 patients (44 CONS and 31 ENDO patients) with condylar neck fractures were included in this study. The Asymmetric Helkimo Dysfunction Score (A-HDS) was slightly lower in the CONS group than in the ENDO group at the 8-12-week FU, corresponding to better function on the short-term. At the 1-year FU, however, there were slightly better values in the ENDO group. For the Clinical Dysfunction Index (Di) and the Anamnestic Dysfunction Index (Ai), CONS patients had a better outcome than ENDO patients at the 8-12 week FU, ie, a higher proportion of ENDO patients had severe symptoms due to the operative trauma. Yet these symptoms improved by one year, finishing with a significant higher proportion of symptom-free patients in the ENDO group. In addition, these patients had better values for the Index for Occlusion and Articulation Disturbance (Oi) at both FU examinations, ie, the proportion of patients without any occlusal disturbances was significantly higher in the ENDO group. On average, the duration of postoperative maxillo-mandibular fixation (MMF) was 3 times longer for the CONS group than for the ENDO group (33 vs. 11 days). CONCLUSION Both treatment options may yield acceptable results for displaced condylar neck fractures. Especially in patients with severe malocclusion directly after trauma, however, endoscope-assisted transoral open reduction and fixation seems to be the appropriate treatment for prevention of occlusal disturbances during FU.


International Journal of Oral and Maxillofacial Surgery | 2014

En bloc prefabrication of vascularized bioartificial bone grafts in sheep and complete workflow for custom-made transplants

Horst Kokemüller; Philipp Jehn; S. Spalthoff; Harald Essig; Frank Tavassol; Paul Schumann; A. Andreae; I. Nolte; M. Jagodzinski; Nils-Claudius Gellrich

The aim of this pilot study was to determine, in a new experimental model, whether complex bioartificial monoblocs of relevant size and stability can be prefabricated in a defined three-dimensional design, in which the latissimus dorsi muscle serves as a natural bioreactor and the thoracodorsal vessel tree is prepared for axial construct perfusion. Eighteen sheep were included in the study, with six animals in each of three experimental groups. Vitalization of the β-tricalcium phosphate-based constructs was performed by direct application of unmodified osteogenic material from the iliac crest (group A), in vivo application of nucleated cell concentrate (NCC) from bone marrow aspirate (group B), and in vitro cultivation of bone marrow stromal cells (BMSC) in a perfusion bioreactor system (group C). The contours of the constructs were designed digitally and transferred onto the bioartificial bone grafts using a titanium cage, which was bent over a stereolithographic model of the defined subvolume intraoperatively. At the end of the prefabrication process, only the axial vascularized constructs of group A demonstrated vital bone formation with considerable stability. In groups B and C, the applied techniques were not able to induce ectopic bone formation. The presented computer-assisted workflow allows the prefabrication of custom-made bioartificial transplants.

Collaboration


Dive into the Harald Essig's collaboration.

Top Co-Authors

Avatar
Top Co-Authors

Avatar
Top Co-Authors

Avatar
Top Co-Authors

Avatar
Top Co-Authors

Avatar
Top Co-Authors

Avatar

Majeed Rana

Hannover Medical School

View shared research outputs
Top Co-Authors

Avatar
Top Co-Authors

Avatar
Top Co-Authors

Avatar
Top Co-Authors

Avatar

A. Eckardt

Hannover Medical School

View shared research outputs
Researchain Logo
Decentralizing Knowledge