Hark Hoe Tan

Enhanced luminescence from GaN nanopillar arrays fabricated using a top-down process.

We report the fabrication of GaN nanopillar arrays with good structural uniformity using the top-down approach. The photoluminescence intensity from the nanopillar arrays is enhanced compared to the epilayer. We use finite difference time domain simulations to show that the enhancement in photoluminescence intensity from the nanopillar arrays is a result of anti-reflection properties of the arrays that result in enhanced light absorption and increase light extraction efficiency compared to the epilayer. The measured quantum efficiency of the nanopillars is comparable to that of an epitaxially grown GaN epilayer.

Improved photoelectrochemical performance of GaN nanopillar photoanodes

In this work, we report on the photoelectrochemical (PEC) investigation of n-GaN nanopillar (NP) photoanodes fabricated using metal organic chemical vapour deposition and the top-down approach. Substantial improvement in photocurrents is observed for GaN NP photoanodes compared to their planar counterparts. The role of carrier concentration and NP dimensions on the PEC performance of NP photoanodes is further elucidated. Photocurrent density is almost doubled for doped NP photoanodes whereas no improvement is noticed for undoped NP photoanodes. While the diameter of GaN NP is found to influence the onset potential, carrier concentration is found to affect both the onset and overpotential of the electrodes. Optical and electrochemical impedance spectroscopy characterisations are utilised to further explain the PEC results of NP photoanodes. Finally, improvement in the photostability of NP photoanodes with the addition of NiO as a co-catalyst is investigated.

Radiation effects on GaAs/AlGaAs core/shell ensemble nanowires and nanowire infrared photodetectors

With the recent advances in nanowire (NW) growth and fabrication, there has been rapid development and application of GaAs NWs in optoelectronics. It is also of importance to study the radiation tolerance of optoelectronic nano-devices for atomic energy and space-based applications. Here, photoluminescence (PL) and time-resolved photoluminescence measurements were carried out on GaAs/AlGaAs core/shell NWs at room temperature before and after 1 MeV proton irradiation with fluences ranging from 1.0xa0×xa01012-3.0xa0×xa01013 cm-2. It is found that the GaAs/AlGaAs core/shell NWs with smaller diameter show much less PL degradation compared with the ones with larger diameters. The increased radiation hardness is mainly attributed to the improvement of a room temperature dynamic-annealing mechanism near the surface of the NWs. We also found that the minority carrier lifetime is closely related to both the PL intensity and defect density induced by irradiation. Finally, GaAs/AlGaAs ensemble NW photodetectors operating in the near-infrared spectral regime have been demonstrated. The influence of proton irradiation on light and dark current characteristics also indicates that NW structures are a good potential candidate for radiation harsh-environment applications.

Effect of active region position in Fabry-Perot single transverse mode broad-waveguide InGaAsP/InP lasers

The dependence of laser performance on the active region position in broad-waveguide laser diodes is presented in this paper. Performance of structures with different position of active region is compared in simulation and actual devices. Lasers with active region displaced towards the p-cladding layer outperformed the lasers with active region undisplaced or displaced towards the n-cladding layer both in simulation and experimentally. Maximum output power increased by 25% for devices with active region displaced towards the p-cladding layer.

Merged beam laser design for reduction of gain-saturation and two-photon absorption in high power single mode semiconductor lasers

In this paper we report a method to overcome the limitations of gain-saturation and two-photon absorption faced by developers of high power single mode InP-based lasers and semiconductor optical amplifiers (SOA) including those based on wide-waveguide or slab-coupled optical waveguide laser (SCOWL) technology. The method is based on Y-coupling design of the laser cavity. The reduction in gain-saturation and two-photon absorption in the merged beam laser structures (MBL) are obtained by reducing the intensity of electromagnetic field in the laser cavity. Standard ridge-waveguide lasers and MBLs were fabricated, tested and compared. Despite a slightly higher threshold current, the reduced gain-saturation in MBLs results in higher output power. The MBLs also produced a single spatial mode, as well as a strongly dominating single spectral mode which is the inherent feature of MBL-type cavity.

Dynamics and control of gold-encapped gallium arsenide nanowires imaged by 4D electron microscopy

Significance Imaging chemical/physical reaction dynamics at nanoscale interfaces of a composite nanostructure requires resolutions in both space and time. Using single-pulse methodology, we directly and visually capture the irreversible eutectic-related phase reactions of a single, same metal/semiconductor nanowire at nanometer–nanosecond spatiotemporal resolution by 4D electron microscopy. With a nondestructive free-standing sample preparation free from environmental disturbance that is important for statistical investigation, we have both qualitatively and quantitatively elucidated the transient phase reactions and obtained important physical properties of the newly formed phases, such as latent heat and specific heat. Our work provides an efficient way of quantitatively determining physical properties of a nanoscale object with a tiny small quantity, especially when not available in bulk counterparts. Eutectic-related reaction is a special chemical/physical reaction involving multiple phases, solid and liquid. Visualization of a phase reaction of composite nanomaterials with high spatial and temporal resolution provides a key understanding of alloy growth with important industrial applications. However, it has been a rather challenging task. Here, we report the direct imaging and control of the phase reaction dynamics of a single, as-grown free-standing gallium arsenide nanowire encapped with a gold nanoparticle, free from environmental confinement or disturbance, using four-dimensional (4D) electron microscopy. The nondestructive preparation of as-grown free-standing nanowires without supporting films allows us to study their anisotropic properties in their native environment with better statistical character. A laser heating pulse initiates the eutectic-related reaction at a temperature much lower than the melting points of the composite materials, followed by a precisely time-delayed electron pulse to visualize the irreversible transient states of nucleation, growth, and solidification of the complex. Combined with theoretical modeling, useful thermodynamic parameters of the newly formed alloy phases and their crystal structures could be determined. This technique of dynamical control aided by 4D imaging of phase reaction processes on the nanometer-ultrafast time scale opens new venues for engineering various reactions in a wide variety of other systems.

Photoelectrochemical studies of InGaN/GaN MQW photoanodes

The research interest in photoelectrochemical (PEC) water splitting is ever growing due to its potential to contribute towards clean and portable energy. However, the lack of low energy band gap materials with high photocorrosion resistance is the primary setback inhibiting this technology from commercialisation. The ternary alloy InGaN shows promise to meet the photoelectrode material requirements due to its high chemical stability and band gap tunability. The band gap of InGaN can be modulated from the UV to IR regions by adjusting the In concentration so as to absorb the maximum portion of the solar spectrum. This paper reports on the influence of In concentration on the PEC properties of planar and nanopillar (NP) InGaN/GaN multi-quantum well (MQW) photoanodes, where NPs were fabricated using a top-down approach. Results show that changing the In concentration, while having a minor effect on the PEC performance of planar MQWs, has an enormous impact on the PEC performance of NP MQWs, with large variations in the photocurrent density observed. Planar photoanodes containing MQWs generate marginally lower photocurrents compared to photoanodes without MQWs when illuminated with sunlight. NP MQWs with 30% In generated the highest photocurrent density of 1.6 mA cm-2, 4 times greater than that of its planar counterpart and 1.8 times greater than that of the NP photoanode with no MQWs. The InGaN/GaN MQWs also slightly influenced the onset potential of both the planar and NP photoanodes. Micro-photoluminescence, diffuse reflectance spectroscopy and IPCE measurements are used to explain these results.

Perovskite Photovoltaic Integrated CdS/TiO2 Photoanode for Unbiased Photoelectrochemical Hydrogen Generation

Photoelectrolysis of water using solar energy into storable and environment-friendly chemical fuel in the form of hydrogen provides a potential solution to address the environmental concerns and fulfill future energy requirements in a sustainable manner. Achieving efficient and spontaneous hydrogen evolution in water using solar light as the only energy input is a highly desirable but a difficult target. In this work, we report perovskite solar cell integrated CdS-based photoanode for unbiased photoelectrochemical hydrogen evolution. An integrated tandem device consisting of mesoporous CdS/TiO2 photoanode paired with a triple-cation perovskite (Cs0.05(MA0.17FA0.83)0.95Pb(I0.83Br0.17)3) solar cell is developed via a facile fabrication route. The proposed photovoltaic integrated photoanode presents an efficient tandem configuration with high optical transparency to long-wavelength photons and strong photoelectrochemical conversions from short-wavelength photons. On the basis of this integrated tandem device, an unbiased photocurrent density of 7.8 mA/cm2 is demonstrated under AM1.5G illumination.

Fabrication and photoluminescence studies of GaN nanopillars

GaN nanopillar arrays are fabricated by inductively coupled plasma reactive ion etching (ICP-RIE) of lithographically patterned GaN epilayers grown on sapphire substrate. The morphology and optical quality of the nanopillars is investigated by scanning electron microscopy (SEM) and micro-photoluminescence (μ-PL) respectively. The PL intensity of the nanopillars is enhanced by a factor of more than four compared to that of the epitaxial layers. However, a small increase in the full width half maximum (FWHM) of the nanopillar PL spectra is observed.