Hasi Wu-Li-Ji

Study on two-cell stimulated Brillouin scattering system with mixture medium

In this paper, a method of choosing mixture medium in two-cell stimulated Brillouin scattering (SBS) system to improve the system performance is proposed. The Brillouin frequency shift (BFS) of mixture medium varies with the mixing ratio and thus the difference of the BFS between the two cells can be eliminated. The two-cell SBS system with acetone (C3H6O) in its generator cell and mixture liquid of CCl4/C2Cl4 in its amplifier cell is investigated. The C3H6O has a high optical breakdown threshold and the mixture liquid of CCl4/C2Cl4 has a small absorption coefficient and the same BFS as that of C3H6O when the volume fraction of CCl4 is 4%. Compared with two-cell SBS system with the same liquid (C2Cl4) or different liquid (C3H6O and C2Cl4) in generator and amplifier cell, the SBS system with mixture liquid (CCl4/C2Cl4) in amplifier cell and C3H6O in generator cell improves the power-load, energy reflectivity (ER), phase conjugation (PC) fidelity and ER stability.

Spectrum evolutions of spontaneous and pump-depleted stimulated Brillouin scatterings in liquid media

A theoretical model for calculating spontaneous and stimulated Brillouin scattering(SBS) spectra is described. An empirical formula for the Stokes output spectral linewidth, a function of spontaneous Brillouin linewidth and the exponential gain coefficient, is obtained by the calculated data fitting. The formula holds true for two cases involving pump undepletion and depletion. The lineshape change from spontaneous to highly pump-depleted SBS spectra is also investigated. The result shows that for the pump power below the SBS threshold, the Stokes output spectral lineshape evolves from Lorentzian to approximately Gaussian as the pump power increases. For the pump power near or beyond the threshold, the SBS spectrum is in the form of a steady Gaussian profile, and the spectral linewidth comes to a certain value about 7 times narrower than the spontaneous one. The theoretical results are experimentally demonstrated by using several common liquid media.

Pulse Compression Based on Laser-Induced Optical Breakdown in Suspension

Pulse compression based on laser-induced optical breakdown in suspension is investigated. The physical mechanism behind it is analyzed theoretically and validated in the Q-switched Nd:YAG laser system. A 12-ns pump pulse is suppressed to 5 ns with good fidelity in the front edge and sharp steepness in the trailing edge. The HT-270, which has a small gain coefficient and absorption coefficient, is used as a solvent, and therefore the disturbance induced by stimulated Brillouin scattering and absorption are minimized and the transmittivity is enhanced.

Investigation on improving characteristics of two-cell SBS system with CCl4/C2H5OH liquid mixture

In order to improve the performance of the two-cell stimulated Brillouin scattering (SBS) system, this paper proposes the methods of using mixtures, which require amplifier media to have small absorption rate, and generator media to have high optical breakdown threshold and Brillouin frequency shift equal to that of the amplification media. The characteristics of the two-cell SBS system are studied experimentally by using CCl4 as amplifier medium and CCl4, C2H5OH and CCl4/C2H5OH liquid mixture as generator medium pumped by Nd:YAG Q-switched laser. The obtained results show that liquid mixture in generator cell improves the power load ability, phase conjugation fidelity, energy reflectivity (ER) and ER stability.

A method to measure the Brillouin frequency shift of the medium through Brillouin amplification ratio

In order to measure the Brillouin frequency shift (BFS) of the medium, this paper proposes a method using mixtures in a two-cell stimulated Brillouin scattering system, which uses a medium to be measured as amplifier medium and a mixture medium as generator medium. The seed light from the generator gains effective amplification in the amplifier and the amplification ratio changes with the mixing fraction. Only when the BFS of the mixture medium is equal to that of the medium in the amplifier does the seed light obtain the maximum amplification ratio. The method has the advantage of independence of the wavelength of the incident light.