Hassan A. Alhazmi

Recent advances in affinity capillary electrophoresis for binding studies

The present review covers recent advances and important applications of affinity capillary electrophoresis (ACE). It provides an overview about various ACE types, including ACE-MS, the multiple injection mode, the use of microchips and field-amplified sample injection-ACE. The most common scenarios of the studied affinity interactions are protein-drug, protein-metal ion, protein-protein, protein-DNA, protein-carbohydrate, carbohydrate-drug, peptide-peptide, DNA-drug and antigen-antibody. Approaches for the improvements of ACE in term of precision, rinsing protocols and sensitivity are discussed. The combined use of computer simulation programs to support data evaluation is presented. In conclusion, the performance of ACE is compared with other techniques such as equilibrium dialysis, parallel artificial membrane permeability assay, high-performance affinity chromatography as well as surface plasmon resonance, ultraviolet, circular dichroism, nuclear magnetic resonance, Fourier transform infrared, fluorescence, MS and isothermal titration calorimetry.

A comprehensive platform to investigate protein–metal ion interactions by affinity capillary electrophoresis

In this work, the behavior of several metal ions with different globular proteins was investigated by affinity capillary electrophoresis. Screening was conducted by applying a proper rinsing protocol developed by our group. The use of 0.1M EDTA in the rinsing solution successfully desorbs metal ions from the capillary wall. The mobility ratio was used to evaluate the precision of the method. Excellent precision for repeated runs was achieved for different protein metal ion interactions (RSD% of 0.05-1.0%). Run times were less than 6 min for all of the investigated interactions. The method has been successfully applied for the interaction study of Li(+), Na(+), Mg(2+), Ca(2+), Ba(2+), Al(3+), Ga(3+), La(3+), Pd(2+), Ir(3+), Ru(3+), Rh(3+), Pt(2+), Pt(4+), Os(3+), Au(3+), Au(+), Ag(+), Cu(1+), Cu(2+), Fe(2+), Fe(3+), Co(2+), Ni(2+), Cr(3+), V(3+), MoO4(2-) and SeO3(2-) with bovine serum albumin, ovalbumin, β-lactoglobulin and myoglobin. Different interaction values were obtained for most of the tested metal ions even for that in the same metal group. Results were discussed and compared in view of metal and semimetal groups interaction behavior with the tested proteins. The calculated normalized difference of mobility ratios for each protein-metal ion interaction and its sign (positive and negative) has been successfully used to detect the interaction and estimate further coordination of the bound metal ion, respectively. The comprehensive platform summarizes all the obtained interaction results, and is valuable for any future protein-metal ion investigation.

Targeting Peroxisome Proliferator-Activated Receptors Using Thiazolidinediones: Strategy for Design of Novel Antidiabetic Drugs

Thiazolidinediones are a class of well-established antidiabetic drugs, also named as glitazones. Thiazolidinedione structure has been an important structural domain of research, involving design and development of new drugs for the treatment of type 2 diabetes. Extensive research on the mechanism of action and the structural requirements has revealed that the intended antidiabetic activity in type 2 diabetes is due to their agonistic effect on peroxisome proliferator-activated receptor (PPAR) belonging to the nuclear receptor super family. Glitazones have specific affinity to PPARγ, one of the subtypes of PPARs. Certain compounds under development have dual PPARα/γ agonistic activity which might be beneficial in obesity and diabetic cardiomyopathy. Interesting array of hybrid compounds of thiazolidinedione PPARγ agonists exhibited therapeutic potential beyond antidiabetic activity. Pharmacology and chemistry of thiazolidinediones as PPARγ agonists and the potential of newer analogues as dual agonists of PPARs and other emerging targets for the therapy of type 2 diabetes are presented. This review highlights the possible modifications of the structural components in the general frame work of thiazolidinediones with respect to their binding efficacy, potency, and selectivity which would guide the future research in design of novel thiazolidinedione derivatives for the management of type 2 diabetes.

Optimization of affinity capillary electrophoresis for routine investigations of protein–metal ion interactions

To facilitate the implementation of affinity capillary electrophoresis into routine binding screening studies of proteins with metal ions, method acceleration, transfer and precision improvement were investigated. Affinity capillary electrophoresis was accelerated by using shorter capillaries, employing lower sample concentrations and smaller injection volumes. Intra- and inter-instrument method transfers were investigated considering the temperature setting of the capillary cooling system. For intra-instrument method transfer, similar results were obtained when transferring a method from a long (62 cm) to a short (31 cm) capillary. The analysis time was reduced from 9 to 4 min. In case of inter-instrument method transfer, interaction results showed small variation on the capillary electrophoresis instrument with inefficient capillary cooling system. Binding measurement precision was enhanced by slightly pushing the sample above the beginning of the capillary. Changing the buffer vials after each 30 runs and employing extra flushing after each 60 subsequent runs further enhanced the precision. The use of 0.1 molar ethylenediaminetetraacetic acid in the rinsing solution successfully desorbs the remaining metal ions from the capillary wall. Excellent precision for apparent mobility ratio measurements was achieved for different protein-metal ion interactions (relative standard deviation of 0.16-0.89%, 15 series, 12 runs for each).

Ca(2+) -complex stability of GAPAGPLIVPY peptide in gas and aqueous phase, investigated by affinity capillary electrophoresis and molecular dynamics simulations and compared to mass spectrometric results.

Strong, sequence‐specific gas‐phase bindings between proline‐rich peptides and alkaline earth metal ions in nanoESI‐MS experiments were reported by Lehmann et al. (Rapid Commun. Mass Spectrom. 2006, 20, 2404–2410), however its relevance for physiological‐like aqueous phase is uncertain. Therefore, the complexes should also be studied in aqueous solution and the relevance of the MS method for binding studies be evaluated. A mobility shift ACE method was used for determining the binding between the small peptide GAPAGPLIVPY and various metal ions in aqueous solution. The findings were compared to the MS results and further explained using computational methods. While the MS data showed a strong alkaline earth ion binding, the ACE results showed nonsignificant binding. The proposed vacuum state complex also decomposed during a molecular dynamic simulation in aqueous solution. This study shows that the formed stable peptide–metal ion adducts in the gas phase by ESI‐MS does not imply the existence of analogous adducts in the aqueous phase. Comparing peptide–metal ion interaction under the gaseous MS and aqueous ACE conditions showed huge difference in binding behavior.

A Fast and Validated Reversed-Phase HPLC Method for Simultaneous Determination of Simvastatin, Atorvastatin, Telmisartan and Irbesartan in Bulk Drugs and Tablet Formulations

The aim of this study was to develop and validate a fast and simple reversed-phase HPLC method for simultaneous determination of four cardiovascular agents—atorvastatin, simvastatin, telmisartan and irbesartan in bulk drugs and tablet oral dosage forms. The chromatographic separation was accomplished by using Symmetry C18 column (75 mm × 4.6 mm; 3.5 μ) with a mobile phase consisting of ammonium acetate buffer (10 mM; pH 4.0) and acetonitrile in a ratio 40:60 v/v. Flow rate was maintained at 1 mL/min up to 3.5 min, and then suddenly changed to 2 mL/min till the end of the run (7.5 min). The data was acquired using ultraviolet detector monitored at 220 nm. The method was validated for linearity, precision, accuracy and specificity. The developed method has shown excellent linearity (R2 > 0.999) over the concentration range of 1–16 µg/mL. The limits of detection (LODs) and limits of quantification (LOQs) were in the range of 0.189–0.190 and 0.603–0.630 µg/mL, respectively. Inter-day and intra-day accuracy and precision data were recorded in the acceptable limits. The new method has successfully been applied for quantification of all four drugs in their tablet dosage forms with percent recovery within 100 ± 2%.

Comparing monolithic and fused core HPLC columns for fast chromatographic analysis of fat soluble vitamins

Abstract HPLC stationary phases of monolithic and fused core type can be used to achieve fast chromatographic separation as an alternative to UPLC. In this study, monolithic and fused core stationary phases are compared for fast separation of four fat-soluble vitamins. Three new methods on the first and second generation monolithic silica RP-18e columns and a fused core pentafluoro-phenyl propyl column were developed. Application of three fused core columns offered comparable separations of retinyl palmitate, DL-α-tocopheryl acetate, cholecalciferol and menadione in terms of elution speed and separation efficiency. Separation was achieved in approx. 5 min with good resolution (Rs > 5) and precision (RSD ≤ 0.6 %). Monolithic columns showed, however, a higher number of theoretical plates, better precision and lower column backpressure than the fused core column. The three developed methods were successfully applied to separate and quantitate fat-soluble vitamins in commercial products.

Ultrafast monolithic HPLC method for simultaneous quantification of the anticancer agents, imatinib and sorafenib: Application to tablet dosage forms

Purpose : To develop and validate a simple ultrafast monolithic high performance liquid chromatography (HPLC) method for the simultaneous quantification of two anti-cancer agents, imatinib and sorafenib, in pure form and tablet preparations. Method : Chromatographic separation was accomplished using Chromolith flash RP-18 HPLC-column (25 - 4.6 mm; macropores, 2 μm; mesopores, 13 – 15 nm). The optimum mobile phase composition of ammonium acetate buffer (10 mM, pH 8.5) and methanol at ratio of 35:65 v/v was used. Effluent flow rate was adjusted to 1.0 mL/min and the analysis was performed at 250 nm wavelength. The developed method was evaluated for specificity, linearity, precision and accuracy. Results : The method offered a linear relationship over the concentration range of 1 - 16 μg/ml (correction coefficient, R 2 = 0.9999) for both analytes. Limit of detection (LOD) was 0.1891 and 0.1888 μg/ml while limit of quantification (LOQ) was 0.6303 and 0.6294 μg/ml for imatinib and sorafenib, respectively. Mean recovery was within 100 ± 2 %. The utility of the new method was demonstrated by its successful use for the analysis of commercially available tablet formulations of both drugs. Conclusion : The developed method is fast and economical, and is being recommended for routine analysis of imatinib and sorafenib in bulk drug and tablet dosage forms in quality control laboratories. Keywords : RP-HPLC, Chromolith, Imatinib, Sorafenib, Validation, Quality control

Thermophoresis for characterizing biomolecular interaction.

The study of biomolecular interactions is crucial to get more insight into the biological system. The interactions of protein-protein, protein-nucleic acids, protein-sugars, nucleic acid-nucleic acids and protein-small molecules are supporting therapeutics and technological developments. Recently, the development in a large number of analytical techniques for characterizing biomolecular interactions reflect the promising research investments in this field. In this review, microscale thermophoresis technology (MST) is presented as an analytical technique for characterizing biomolecular interactions. Recent years have seen much progress and several applications established. MST is a powerful technique in quantitation of binding events based on the movement of molecules in microscopic temperature gradient. Simplicity, free solutions analysis, low sample volume, short analysis time, and immobilization free are the MST advantages over other competitive techniques. A wide range of studies in biomolecular interactions have been successfully carried out using MST, which tend to the versatility of the technique to use in screening binding events in order to save time, cost and obtained high data quality.

Catha Edulis Active Principle, Cathinone, Suppresses Motor Coordination, Accelerates Anxiety and Alters the Levels of Dopamine and its Metabolites in the Limbic Areas of Male Swiss Albino Mice

Abstract Cathinone, the active principle of khat (Catha edulis), stimulates, excites and produces euphoric feelings in khat users. Locomotor and rearing activities, either individual or in groups, of male Swiss albino mice were decreased significantly compared to the control. Motor coordination tests (rotarod, rope climb and grip tests) have shown decreased motor performance in the mice treated with cathinone compared to the control. The elevated plus maze test has shown significant anxiety in the mice compared to the control. Contents of dopamine and its metabolite, homovanillic acid, were increased in the limbic areas compared to the control group. In contrast, contents of 3,4-dihydroxyphenyl acetic acid were depleted significantly and dose dependently compared to the control group in the limbic areas of mice. In conclusion, natural cathinone has depleted motor coordination, accelerated anxiety in mice and altered the contents of dopamine and its metabolites.