Hassan Chaouk

Porous conducting membranes based on polypyrrole–PMMA composites

Abstract A series of porous membranes consisting of polymethyl methacrylate (PMMA) and polypyrrole (PPy) were prepared using porogen leaching techniques. The liquid porogen used was polypropylene glycol, molecular weight 775 (PPG-775) while sodium chloride powder was used as the solid porogen. The pore structure of the asymmetrical membranes was characterised using scanning electron microscopy (SEM) which demonstrated pore sizes ranging from 2 to 100 μm. The permeability of the membranes was characterised with either lysozyme (molecular weight=14,000) or bovine serum albumin (BSA, molecular weight=67,000). The membranes prepared with sodium chloride demonstrated little resistance to the passage of water or albumin while the membranes prepared with PPG-774 had limited permeability to lysozyme.

The use of corneal organ culture in biocompatibility studies

This study investigated the potential of a corneal organ culture system in the evaluation of polymers for ophthalmic devices that require epithelialisation. Two different polymers were tested in lenticule form to explore the sensitivity of this in vitro assay. Polycarbonate and perfluoropolyether-based lenticules were surgically implanted into bovine corneas and compared with a parallel series of sham-wounded corneas. Following surgery, all corneas were maintained in an air/liquid organ culture system for up to 8 days during which time they were evaluated clinically to monitor the rate of epithelial growth across the lenticule surface (implanted) or wound bed (sham). Data showed differences in the kinetics of epithelial migration according to the underlying surface with full epithelialisation of the sham series occurring on day 5+/-0.5, the perfluoropolyether lenticules on day 6+0.5 and polycarbonate lenticules on day 8+/-0.5. Histology revealed differences in the structure and morphology of the migrating and stable epithelium in each series of corneas. The differential response of the corneal epithelium was related to the physiochemical characteristics of the natural (sham) or synthetic (perfluoropolyether or polycarbonate) substrata which the epithelium could detect when maintained in organ culture. This assay system has utility for screening candidate polymers for certain ophthalmic applications.

Cell interactions with perfluoropolyether-based network copolymers

We have investigated the potential of several polymers based on perfluoropolyether (PFPE) macromonomers for use in biomaterial applications. Polymer networks were synthesised from the PFPE macromonomers of increasing chain length and the adhesion and proliferation of corneal, vascular and bone cells was evaluated on these polymers. The polymer surfaces were quite hydrophobic, having sessile air-water contact angles ranging between 96 and 125 degrees. However, these polymers supported the attachment and growth of bovine corneal epithelial and endothelial cells and fibroblasts at 60-100% of the rate of cell growth on the culture substratum, TCPS. Furthermore, the PFPE polymers supported the attachment and growth of vascular endothelial cells (from human umbilical artery) and human bone-derived cells over a 7 day period at an equal level to TCPS. The relationship between the macromonomer chain length (n = 1 to 4) and the ability of the resulting PFPE homopolymer to support the overgrowth of corneal epithelial tissue was also evaluated. The PFPE-containing polymers supported corneal epithelial tissue overgrowth, with the most effective having a performance equivalent to that of TCPS. In addition to these homopolymers, copolymers comprising of PFPE and N,N-dimethylaminoethyl methacrylate (DMAEMA) were also synthesised. Surprisingly, the addition of DMAEMA to the PFPE polymer network lead to a reduction in the growth and attachment of corneal epithelial cells and fibroblasts. These results indicate that PFPE-based materials show a potential for use in the development of biomaterials in the ocular, vascular and orthopaedic areas.

The influence of surface topography of a porous perfluoropolyether polymer on corneal epithelial tissue growth and adhesion

Design principles for corneal implants are challenging and include permeability which inherently involves pore openings on the polymer surface. These topographical cues can be significant to a successful clinical outcome where a stratified epithelium is needed over the device surface, such as with a corneal onlay or corneal repair material. The impact of polymer surface topography on the growth and adhesion of corneal epithelial tissue was assessed using porous perfluoropolyether membranes with a range of surface topography. Surfaces were characterised by AFM and XPS, and the permeability and water content of membranes was measured. Biological testing of membranes involved a 21-day in vitro tissue assay to evaluate migration, stratification and adhesion of corneal epithelium. Similar parameters were monitored in vivo by surgically implanting membranes into feline corneas for up to 5 months. Data showed optimal growth and adhesion of epithelial tissue in vitro when polymer surface features were below a 150 nm RMS value. Normal processes of tissue growth and adhesion were disrupted when RMS values approached 300 nm. Data from the in vivo study confirmed these findings. Together, outcomes demonstrated the importance of surface topography in the design of implantable devices that depend on functional epithelial cover.