Hazem Eimar

Hydrogen peroxide whitens teeth by oxidizing the organic structure

OBJECTIVES The mechanism of tooth bleaching using peroxide oxidizers is not fully understood. It is unknown whether peroxide radicals make teeth whiter by deproteinizing, demineralizing, or oxidizing tooth tissues. This study was designed to define the mechanism of tooth bleaching and determine which of tooth enamel chemical components is/are affected by bleaching. METHODS Sixty sound teeth were collected from adult patients. The teeth were divided into 6 equal groups (n=10). Groups 1, 2, 3 and 4 were treated for 4 days with one of the following solutions: deproteinizing (NaOH) that removes organic content, demineralizing (EDTA) that decalcifies the mineral content, oxidizing (H(2)O(2)) and distilled water (control). Group 5 and 6 were pre-treated with either deproteinizing or demineralizing solutions before treating them with oxidizing solutions for 4 days. Changes in enamel elemental ratios, crystallinity index and tooth shade parameters of the treated teeth were examined by means of EDS, Raman spectroscopy and shade-spectrophotometry. The data obtained was analysed with Wilcoxon Signed-Ranks Test, and the statistical significance was set at p<0.05. RESULTS Tooth deproteinization increased the lightness by 4.8 ± 2.7°, tooth demineralization resulted in 8.5 ± 5.6° decrease in the lightness and tooth oxidization induced 19.9 ± 6.5° increase in the lightness. Oxidization of the deproteinized teeth did not influence shade parameters, but oxidation of the demineralized teeth resulted in 10.7 ± 5.8° increase in the lightness. CONCLUSION Hydrogen peroxide does not induce significant changes in tooth enamel organic and inorganic relative contents, and it whitens teeth just by oxidizing their organic matrix. These findings are of great clinical significance since they explain the mechanism of tooth bleaching, and help understanding its limitations and disadvantages.

The effect of autoclaving on the physical and biological properties of dicalcium phosphate dihydrate bioceramics: brushite vs. monetite.

Dicalcium phosphate dihydrate (brushite) is an osteoconductive biomaterial with great potential as a bioresorbable cement for bone regeneration. Preset brushite cement can be dehydrated into dicalcium phosphate anhydrous (monetite) bioceramics by autoclaving. This heat treatment results in changes in the physical characteristics of the material, improving in vivo bioresorption. This property is a great advantage in bone regeneration; however, it is not known how autoclaving brushite preset cement might improve its capacity to regenerate bone. This study was designed to compare brushite bioceramics with monetite bioceramics in terms of physical characteristics in vitro, and in vivo performance upon bone implantation. In this study we observed that monetite bioceramics prepared by autoclaving preset brushite cements had higher porosity, interconnected porosity and specific surface area than their brushite precursors. In vitro cell culture experiments revealed that bone marrow cells expressed higher levels of osteogenic genes Runx2, Opn, and Alp when the cells were cultured on monetite ceramics rather than on brushite ones. In vivo experiments revealed that monetite bioceramics resorbed faster than brushite ones and were more infiltrated with newly formed bone. In summary, autoclaving preset brushite cements results in a material with improved properties for bone regeneration procedures.

The role of enamel crystallography on tooth shade.

OBJECTIVES Tooth shade is influenced by a combination of extrinsic-stains that are adsorbed to the enamel surface and by its intrinsic-shade resulting from the interaction of light with tooth structures. This study was designed to investigate how the variations in enamel ultrastructure may affect tooth optical properties. METHODS One-hundred extracted teeth were collected from adult patients attending McGill-Undergraduate Dental Clinics. Shade-spectrophotometry, FTIR and XRD were used to assess tooth shade, enamel chemical composition and crystallography. The data obtained was analysed for Pearson correlation analysis and multiple linear regression analysis. The statistical significance was set at P < 0.05. RESULTS Tooth shade parameters varied dramatically within the studied population. Pearson correlation analysis demonstrated that tooth hue was associated with enamel hydroxyapatite (HA) crystal size (R = -0.358; B = -0.866; P = 0.007), tooth chroma was associated with enamel HA carbonization (R = -0.419; B = -99.06; P = 0.005), and tooth lightness was associated with both enamel HA crystal size (R = -0.313; B = -1.052; P = 0.019) and the degree of HA carbonization (R = -0.265; B=-57.95; P = 0.033). Multiple linear regression analysis demonstrated that the size of enamel HA crystals and the relative content of mineral carbonate were the most important predictors for tooth shade lightness (P = 0.018) and chroma (P=0.008), respectively. In contrast, enamel organic content had no correlation with tooth shade. CONCLUSIONS In the present study we have revealed that the tooth shade is regulated by the size of their HA enamel crystals. On the other hand, variation in the degree of enamel HA carbonization can also affect the tooth shade. These findings are of great relevance in dentistry since it provides better understanding of tooth aesthetics.

Membranes over the lateral window in sinus augmentation procedures: a two‐arm and split‐mouth randomized clinical trials

OBJECTIVE This study evaluates whether or not, among other factors, membrane-coverage of antrostomy defects improves implant survival in sinus augmentation procedures. MATERIALS AND METHODS We performed a two-arm and split-mouth randomized controlled clinical trial on 104 and 5 patients respectively. In the two-arm study, antrostomy defects were membrane-covered in 66 procedures and uncovered in 69, before placing a total of 265 implants that were followed up for 1 year. In the split-mouth study, following bilateral sinus augmentation, antrostomy defects were membrane-covered on one side and left uncovered on the contra-lateral. Bone biopsies from each sinus were histologically analysed 6 months later. RESULTS In the two-arm study, implant survival rates were similar (p = 0.08) in the membrane-covered (96.1%) and uncovered (94.2%) groups. In the split-mouth study, bone augmentation was similar in both groups (p = 0.52). Delayed implant placement (p = 0.04), thick Schneiders membrane (≥2 mm) (p < 0.01), treatment for hypertension (p = 0.04) and non-smoking (p = 0.01) seemed to be associated with lower risk of implant failure. CONCLUSIONS Implant survival in sinus lifting procedures could be influenced significantly by timing of implant placement, Schneiders membrane thickness, antihypertensive treatment and smoking habits, but not by antrostomy membrane coverage.

Trace elements can influence the physical properties of tooth enamel

In previous studies, we showed that the size of apatite nanocrystals in tooth enamel can influence its physical properties. This important discovery raised a new question; which factors are regulating the size of these nanocrystals? Trace elements can affect crystallographic properties of synthetic apatite, therefore this study was designed to investigate how trace elements influence enamel’s crystallographic properties and ultimately its physical properties.The concentration of trace elements in tooth enamel was determined for 38 extracted human teeth using inductively coupled plasma-optical emission spectroscopy (ICP-OES). The following trace elements were detected: Al, K, Mg, S, Na, Zn, Si, B, Co, Cr, Cu, Fe, Mn, Mo, Ni, Pb, Sb, Se and Ti. Simple and stepwise multiple regression was used to identify the correlations between trace elements concentration in enamel and its crystallographic structure, hardness, resistance to crack propagation, shade lightness and carbonate content. The presence of some trace elements in enamel was correlated with the size (Pb, Ti, Mn) and lattice parameters (Se, Cr, Ni) of apatite nanocrystals. Some trace elements such as Ti was significantly correlated with tooth crystallographic structure and consequently with hardness and shade lightness. We conclude that the presence of trace elements in enamel could influence its physical properties.

Local regulation of tooth mineralization by sphingomyelin phosphodiesterase 3.

Sphingomyelin phosphodiesterase 3 (Smpd3) encodes a membrane-bound enzyme that cleaves sphingomyelin to generate several bioactive metabolites. A recessive mutation called fragilitas ossium (fro) in the Smpd3 gene leads to impaired mineralization of bone and tooth extracellular matrix (ECM) in fro/fro mice. In teeth from fro/fro mice at various neonatal ages, radiography and light and electron microscopy showed delayed mantle dentin mineralization and a consequent delay in enamel formation as compared with that in control +/fro mice. These tooth abnormalities progressively improved with time. Immunohistochemistry showed expression of SMPD3 by dentin-forming odontoblasts. SMPD3 deficiency, however, did not affect the differentiation of these cells, as shown by osterix and dentin sialophosphoprotein expression. Using a transgenic mouse rescue model (fro/fro; Col1a1-Smpd3) in which Smpd3 expression is driven by a murine Col1a1 promoter fragment active in osteoblasts and odontoblasts, we demonstrate a complete correction of the tooth mineralization delays. In conclusion, analysis of these data demonstrates that Smpd3 expression in odontoblasts is required for tooth mineralization.

Anti‐VEGFs hinder bone healing and implant osseointegration in rat tibiae

AIM To assess the effect of anti-vascular endothelial growth factors (VEGF) on bone healing (defect volume) and implant osseointegration (bone-implant contact per cent) in rat tibia. MATERIALS AND METHODS In Sprague-Dawley rats (n = 36), a unicortical defect was created in the right tibia and a titanium implant was placed in the left tibia of each rat. Rats were assigned into three groups and received either anti-vascular endothelial growth factor neutralizing antibody, Ranibizumab or saline (control). Two weeks following surgery, rats were euthanized and bone samples were retrieved. Bone healing and osseointegration were assessed using micro-CT and histomorphometry. One-way anova followed by the Tukeys test was used for data analyses. RESULTS The volume of the bone defects in the anti-VEGF group (2.48 ± 0.33 mm(3) ) was larger (p = 0.026) than in the controls (2.11 ± 0.36 mm(3) ) as measured by μ-CT. Bone-implant contact percent in the anti-VEGF (19.9 ± 9.4%) and Ranibizumab (21.7 ± 9.2%) groups were lower (p < 0.00) than in the control group (41.8 ± 12.4%). CONCLUSIONS The results of this study suggest that drugs that inhibit the activity of vascular endothelial growth factor (i.e. anti-VEGF) may hinder bone healing and implant osseointegration in rat tibiae.

Antihypertensive Medications and the Survival Rate of Osseointegrated Dental Implants: A Cohort Study

PURPOSE Antihypertensive drugs in general are beneficial for bone formation and remodeling, and are associated with lower risk of bone fractures. As osseointegration is influenced by bone metabolism, this study aimed to investigate the association between antihypertensive drugs and the survival rate of osseointegrated implants. MATERIALS AND METHODS This retrospective cohort study included a total of 1,499 dental implants in 728 patients (327 implants in 142 antihypertensive-drugs-users and 1,172 in 586 nonusers). Multilevel mixed effects parametric survival analyses were used to test the association between antihypertensive drugs use and implant failure adjusting for potential confounders. RESULTS Only 0.6% of the implants failed in patients using antihypertensive drugs while 4.1% failed in nonusers. A higher survival rate of dental implants was observed among users of antihypertensive drugs [HR (95% CI): 0.12 (0.03-0.49)] compared to nonusers. CONCLUSIONS Our findings suggest that treatment with antihypertensive drugs may be associated with an increased survival rate of osseointegrated implants. To our knowledge, this could be the first study showing that the systemic use of a medication could be associated with higher survival rate of dental implants.

Diagenesis-inspired reaction of magnesium ions with surface enamel mineral modifies properties of human teeth.

UNLABELLED Mineralized tissues such as teeth and bones consist primarily of highly organized apatitic calcium-phosphate crystallites within a complex organic matrix. The dimensions and organization of these apatite crystallites at the nanoscale level determine in part the physical properties of mineralized tissues. After death, geological processes such as diagenesis and dolomitization can alter the crystallographic properties of mineralized tissues through cycles of dissolution and re-precipitation occurring in highly saline environments. Inspired by these natural exchange phenomena, we investigated the effect of hypersalinity on tooth enamel. We discovered that magnesium ions reacted with human tooth enamel through a process of dissolution and re-precipitation, reducing enamel crystal size at the surface of the tooth. This change in crystallographic structure made the teeth harder and whiter. Salt-water rinses have been used for centuries to ameliorate oral infections; however, our discovery suggests that this ancient practice could have additional unexpected benefits. STATEMENT OF SIGNIFICANCE Here we describe an approach inspired by natural geological processes to modify the properties of a biomineral - human tooth enamel. In this study we showed that treatment of human tooth enamel with solutions saturated with magnesium induced changes in the nanocrystals at the outer surface of the protective enamel layer. As a consequence, the physical properties of the tooth were modified; tooth microhardness increased and the color shade became whiter, thus suggesting that this method could be used as a clinical treatment to improve dental mechanical properties and esthetics. Such an approach is simple and straightforward, and could also be used to develop new strategies to synthesize and modify biominerals for biomedical and industrial applications.

Regulated fracture in tooth enamel: A nanotechnological strategy from nature

Tooth enamel is a very brittle material; however it has the ability to sustain cracks without suffering catastrophic failure throughout the lifetime of mechanical function. We propose that the nanostructure of enamel can play a significant role in defining its unique mechanical properties. Accordingly we analyzed the nanostructure and chemical composition of a group of teeth, and correlated it with the crack resistance of the same teeth. Here we show how the dimensions of apatite nanocrystals in enamel can affect its resistance to crack propagation. We conclude that the aspect ratio of apatite nanocrystals in enamel determines its resistance to crack propagation. According to this finding, we proposed a new model based on the Hall-Petch theory that accurately predicts crack propagation in enamel. Our new biomechanical model of enamel is the first model that can successfully explain the observed variations in the behavior of crack propagation of tooth enamel among different humans.