Heather Lord

Applications of solid-phase microextraction in food analysis.

Food analysis is important for the evaluation of the nutritional value and quality of fresh and processed products, and for monitoring food additives and other toxic contaminants. Sample preparation, such as extraction, concentration and isolation of analytes, greatly influences the reliable and accurate analysis of food. Solid-phase microextraction (SPME) is a new sample preparation technique using a fused-silica fiber that is coated on the outside with an appropriate stationary phase. Analyte in the sample is directly extracted to the fiber coating. The SPME technique can be used routinely in combination with gas chromatography (GC), GC-mass spectrometry (GC-MS), high-performance liquid chromatography (HPLC) or LC-MS. Furthermore, another SPME technique known as in-tube SPME has also been developed for combination with LC or LC-MS using an open tubular fused-silica capillary column as an SPME device instead of SPME fiber. These methods using SPME techniques save preparation time, solvent purchase and disposal costs, and can improve the detection limits. This review summarizes the SPME techniques for coupling with various analytical instruments and the applications of these techniques to food analysis.

Evolution of solid-phase microextraction technology

The main objective of this contribution is to describe the development of the concepts, techniques and devices associated with solid-phase microextraction, as a response to the evolution of understanding of the fundamental principles behind this technique. The discussion begins with an historical perspective on the very early work conduced almost a decade ago. As new fundamental understanding about the functioning of the technology developed, new ways of constructing and using the SPME devices evolved.

Microextraction of drugs.

This review will attempt to provide an overview as well as a theoretical and practical understanding of the use of microextraction technologies for drug analysis. The majority of the published reports to date focus on the use of fibre solid-phase microextraction and so the review is significantly focused on this technology. Other areas of microextraction such as single drop and solvent film microextraction are also described. Where there are insufficient examples in the literature to illustrate important concepts, examples of non-drug analyses are presented. The review is intended for readers new to the field of microextraction or its use in drug extraction, but also provides an overview of the most recent advances in the field which may be of interest to more experienced users. Particular emphasis is placed on the effect various sample matrices have on extraction characteristics.

Protocol for solid-phase microextraction method development.

Solid-phase microextraction (SPME) is a sample preparation method developed to solve some of the analytical challenges of sample preparation as well as sample introduction and integration of different analytical steps into one system. Since its development, the utilization of SPME has addressed the need to facilitate rapid sample preparation and integrate sampling, extraction, concentration and sample introduction to an analytical instrument into one solvent-free step. This achievement resulted in fast adoption of the technique in many fields of analytical chemistry and successful hyphenation to continuously developing sophisticated separation and detection systems. However, the facilitation of high-quality analytical methods in combination with SPME requires optimization of the parameters that affect the extraction efficiency of this sample preparation method. Therefore, the objective of the current protocol is to provide a detailed sequence of SPME optimization steps that can be applied toward development of SPME methods for a wide range of analytical applications.

Fundamentals and applications of needle trap devices: a critical review.

The needle trap device (NTD) is an extraction trap that contains a sorbent inside a small needle, through which fluid can be actively drawn into and out of by a gas-tight syringe or pump, or analytes can be introduced passively to the trap by diffusion. The needle trap (NT) is a potentially solventless sampling technique/sample preparation and introduction device. Both fluid-borne analytes and particles can be trapped inside the needle and then adsorbed analytes are desorbed in an inlet of analytical instrument and introduced for identification and quantification. The fluid may be either gaseous or liquid. The objectives of this critical review are to summarize the theory of the sampling process for both active and passive time-average extraction modes in addition to outlining the evolution of the technology and main applications.

Analysis of polar pesticides in water and wine samples by automated in-tube solid-phase microextraction coupled with high-performance liquid chromatography-mass spectrometry

A simple and sensitive method for the determination of polar pesticides in water and wine samples was developed by coupling automated in-tube solid-phase microextraction (SPME) to high-performance liquid chromatography-electrospray ionization mass spectrometry (HPLC-ESI-MS). To achieve optimum performance, the conditions for both the in-tube SPME and the ESI-MS detection were investigated. In-tube SPME conditions were optimized by selecting the appropriate extraction parameters, especially the stationary phases used for SPME. For the compounds studied, a custom-made polypyrrole (PPY)-coated capillary showed superior extraction efficiency as compared to several commercial capillaries tested, and therefore, it was selected for in-tube SPME. The influence of the ethanol content on the performance of in-tube SPME was also investigated. It was found that the amount of pesticides extracted decreased with the increase of ethanol content in the solutions. The ESI-MS detection conditions were optimized as follows: nebulizer gas, N2 (30 p.s.i.; 1 p.s.i.=6894.76 Pa); drying gas, N2 (10 l/min, 350 degrees C); capillary voltage, 4500 V; ionization mode, positive; mass scan range, 50-350 amu; fragmentor voltage, variable depending on the ions selected. Due to the high extraction efficiency of the PPY coating and the high sensitive mass detection, the detection limits (S/N = 3) of this method for the compounds studied are in the range of 0.01 to 1.2 ng/ml, which are more than one order of magnitude lower than those of the previous in-tube SPME-HPLC-UV method. A linear relationship was obtained for each analyte in the concentration range of 0.5 to 200 ng/ml with MS detection. This method was applied to the analysis of phenylurea and carbamate pesticides in spiked water and wine samples.

Solid phase microextraction of inorganic anions based on polypyrrole film

The natural anion exchange property of conducting polymer polypyrrole (PPY) was examined using solid phase microextraction (SPME) methods. Our preliminary results demonstrated that the anion exchange property of PPY could be utilized for direct SPME of anionic species from aqueous solutions without derivatization. This paper presents the first example of coupling SPME to ion chromatography (IC).

Determination of stimulants in human urine and hair samples by polypyrrole coated capillary in-tube solid phase microextraction coupled with liquid chromatography-electrospray mass spectrometry

A simple and sensitive method for the determination of amphetamine, methamphetamine and their methylenedioxy derivatives in urine and hair samples was developed by coupling automated in-tube solid phase microextraction (SPME) to high performance liquid chromatography-electrospray ionization mass spectrometry (HPLC-ES-MS). To achieve optimum performance, the conditions for both the in-tube SPME and the ES-MS detection were investigated. ES-MS detection conditions were studied by flow injection analysis (FIA) with direct liquid injection. In-tube SPME conditions were optimized by selecting the appropriate extraction parameters, including capillary stationary phases and sample pH. For the compounds studied, a custom-made polypyrrole (PPY) coated capillary showed superior extraction efficiency as compared to commercial capillaries. Therefore, the PPY coated capillary was selected for in-tube SPME in this study. The calibration curves of stimulants were linear in the range from 0.1 to 100 ng ml(-1) with detection limits (S/N=3) of 8-56 ng l(-1). This method was successfully applied to the analysis of the stimulants in spiked human urine and hair samples.

Automated in-tube solid-phase microextraction-liquid chromatography-electrospray ionization mass spectrometry for the determination of ranitidine.

The technique of automated in-tube solid-phase microextraction (SPME) coupled with liquid chromatography-electrospray ionization mass spectrometry (LC-ESI-MS) was evaluated for the determination of ranitidine. In-tube SPME is an extraction technique for organic compounds in aqueous samples, in which analytes are extracted from the sample directly into an open tubular capillary column by repeated aspirate/dispense steps. In order to optimize the extraction of ranitidine, several in-tube SPME parameters such as capillary column stationary phase, extraction pH and number and volume of aspirate/dispense steps were investigated. The optimum extraction conditions for ranitidine from aqueous samples were 10 aspirate/dispense steps of 30 microliters of sample in 25 mM Tris-HCl (pH 8.5) with an Omegawax 250 capillary column (60 cm x 0.25 mm I.D., 0.25 micron film thickness). The ranitidine extracted on the capillary column was easily desorbed with methanol, and then transported to the Supelcosil LC-CN column with the mobile phase methanol-2-propanol-5 M ammonium acetate (50:50:1). The ranitidine eluted from the column was determined by ESI-MS in selected ion monitoring mode. In-tube SPME followed by LC-ESI-MS was performed automatically using the HP 1100 autosampler. Each analysis required 16 min, and carryover of ranitidine in this system was below 1%. The calibration curve of ranitidine in the range of 5-1000 ng/ml was linear with a correlation coefficient of 0.9997 (n = 24), and a detection limit at a signal-to-noise ratio of three was ca. 1.4 ng/ml. The within-day and between-day variations in ranitidine analysis were 2.5 and 6.2% (n = 5), respectively. This method was also applied for the analyses of tablet and urine samples.

In vivo solid-phase microextraction for monitoring intravenous concentrations of drugs and metabolites

This protocol for in vivo solid-phase microextraction (SPME) can be used to monitor and quantify intravenous concentrations of drugs and metabolites without the need to withdraw a blood sample for analysis. The SPME probe is inserted directly into a peripheral vein of a living animal through a standard medical catheter, and extraction occurs typically over 2–5 min. After extraction, the analytes are removed from the sorbent and analyzed by, for example, liquid chromatography–tandem mass spectrometry. It has been validated in comparison with conventional blood analysis, and we describe here the in vitro experiments typically conducted during method development. The new-generation biocompatible SPME probes are designed specifically for extraction of semi-volatiles and nonvolatiles directly from aqueous samples and can be steam sterilized. Sorbents are coated on fine-gauge surgical steel wire (200-μm diameter), which is more rugged and biocompatible than conventional fibers (100-μm fused silica fiber). They incorporate a binding agent that resists fouling by the biological matrix and does not cause an immune response in the experimental animal. The sorbents used (coating thickness of ∼50 μm) are selected for their affinity for the types of small molecules of interest. The procedure is illustrated by the analysis of benzodiazepines with polypyrrole-coated wires inserted into peripheral blood vessels of beagles, although it can be adapted for use in smaller animals. The in vivo sampling can require as little as 1 min, in which case the entire procedure from sampling to instrumental analysis can take as little as 30 min.