Heather R. Harke

Capillary gel electrophoresis for DNA sequencing : Laser-induced fluorescence detection with the sheath flow cuvette

Capillary polyacrylamide gel electrophoresis separation of dideoxycytidine chain-terminated DNA fragments is reported. A post-column laser-induced fluorescence detector based on the sheath flow cuvette was used to minimize background signals due to light scatter from the gel and capillary. A preliminary mass detection limit of 10(-20) mol of fluorescein-labeled DNA fragments was obtained. The system was used to analyze an actual DNA sequencing sample. Theoretical plate counts of 2 x 10(6) were produced. Gel stability limits the performance of the current system.

Low-cost, high-sensitivity laser-induced fluorescence detection for DNA sequencing by capillary gel electrophoresis

A low cost, 0.75-mW helium neon laser, operating in the green region at 534.5 nm, is used to excite fluorescence from tetramethylrhodamine isothiocyanate-labelled DNA fragments that have been separated by capillary gel electrophoresis. The detection limit (3 sigma) for the dye is 500 ymol [1 yoctomole (1 ymol) = 10(-24) mol] or 300 analyte molecules in capillary zone electrophoresis; the detection limit for labeled primer separated by capillary gel electrophoresis is 2 zmol [1 zeptomole (1 zmol) = 10(-21) mol]. The Richardson-Tabor peak-height encoded sequencing technique is used to prepare DNA sequencing samples. In 6% T, 5% C acrylamide, 7 M urea gels, sequencing rates of 300 bases/hour are produced at an electric field strength of 200 V/cm; unfortunately, the data are plagued by compressions. These compressions are eliminated with addition of 20% formamide to the sequencing gel; the gel runs slowly and sequencing data are generated at a rate of about 70 bases/hour.

Attachment of a single fluorescent label to peptides for determination by capillary zone electrophoresis

Complicated electropherograms are produced in the separation of fluorescently labeled peptides. Incomplete labeling of epsilon-amino groups on lysine residues results in the production of 2n-1 reaction products, where n is the number of alpha and epsilon amino groups in the peptide. A single label is attached to the peptide by first taking the peptide through one cycle of the Edman degradation reaction. All epsilon-amino groups are converted to the phenyl thiocarbamyl and the cleavage step exposes one alpha-amino group at the N-terminus of the peptide; the fluorescent label is attached to the N-terminus.

Effect of total percent polyacrylamide in capillary gel electrophoresis for DNA sequencing of short fragments. A phenomenological model.

Polyacrylamide capillary gels were prepared with constant (5% C) cross-linker concentration and with total acrylamide concentration ranging from 2.5 to 6% T. At each acrylamide concentration, peak spacing was constant for DNA sequencing fragments ranging from 25 to 250 nucleotides in length. Peak spacing increased linearly with the total acrylamide concentration. The intercept of the retention time vs. fragment length plot was independent of % T. Ferguson plots were constructed for short DNA fragments; the polyacrylamide pore size falls in the 2.5 to 3.5 nm range for the gels studied. Theoretical plate count is independent of total acrylamide concentration; longitudinal diffusion, and not thermal gradients, limit the plate count. A phenomenological model is presented that predicts retention time, plate count, and resolution for sequencing fragments ranging in size from 25 to 250 bases and gels that range from 2.5 to 6% total acrylamide.

Single-color laser-induced fluorescence detection and capillary gel electrophoresis for DNA sequencing

Low zeptomole (1 zmol equals 10-21 mol = 600 molecules) detection limits are produced for DNA sequencing by capillary gel electrophoresis. A 750 (mu) w green helium-neon laser ((lambda) equals 543.5 nm) is used to excite tetramethylrhodamine-labeled DNA fragments in a sheath-flow cuvette. A cooled photomultiplier tube is used to detect fluorescence in a single spectral channel. Sequencing data is generated at a rate of about 70 bases/hour.