Hee-Kyung Park

Peptide Nucleic Acid-Based Array for Detecting and Genotyping Human Papillomaviruses

ABSTRACT We describe a novel array for accurate and reliable genotyping of human papillomavirus (HPV) using peptide nucleic acid (PNA) probes. In order to exploit the superior hybridization properties of PNA with target HPV DNAs, we developed a novel PNA array (PANArray HPV). PANArray HPV enables the detection and genotyping of HPVs using 32 type-specific PNA capture probes for medically important HPVs. All tested HPV types showed highly unique hybridization patterns with type-specific PNA probes. PNA array results showed stable specificities and sensitivities after up to 13 months of storage at room temperature. Also, we demonstrated the superior specificity, sensitivity, and stability of PNA arrays for HPV genotyping. We compared the genotyping results of the PNA array to sequencing with MY09/11 PCR products derived from 72 clinical samples. The results showed excellent agreement between the PNA array and sequencing, except for samples reflecting multiple infections. The results from the PNA array were compared with those of type-specific PCR when discrepant results occurred owing to multiple infections. The results for the PNA array matched those of type-specific PCR in all cases. Newly developed PNA arrays show excellent specificity and sensitivity and long shelf life. Our results suggest that the PNA array represents a reliable alternative to conventional DNA arrays for HPV genotyping, as well as for diagnostics.

Comparison of a Conventional Antimicrobial Susceptibility Assay to an Oligonucleotide Chip System for Detection of Drug Resistance in Mycobacterium tuberculosis Isolates

ABSTRACT An oligonucleotide chip (Combichip Mycobacteria chip) detecting specific mutations in the rpoB, katG, and inhA genes of Mycobacterium tuberculosis was compared with conventional antimicrobial susceptibility results. The probes detecting drug resistance were as follows: 7 wild-type and 13 mutant probes for rifampin and 2 wild-type and 3 mutant probes for isoniazid. Target DNA of M. tuberculosis was amplified by PCR, followed by hybridization and scanning. Direct sequencing was performed to verify the results of the oligonucleotide chip. One-hundred seven of 115 rifampin-resistant strains (93%) had mutations in the rpoB gene. Eighty-five of 119 isoniazid-resistant strains (71%) had mutations in the katG gene or inhA gene. The diagnostic oligonucleotide chip with mutation-specific probes is a reliable and useful tool for the rapid and accurate diagnosis of resistance against rifampin and isoniazid in M. tuberculosis isolates.

Oligonucleotide Chip for Detection of Lamivudine-Resistant Hepatitis B Virus

ABSTRACT Hepatitis B virus (HBV) is one of the major causes of liver disease worldwide. It is important to conduct antiviral therapy against chronic hepatitis B to minimize the amount of liver damage. Lamivudine has been known to be an effective antiviral agent for the treatment of HBV infection. However, the emergence of viral mutants resistant to lamivudine is the main concern during the treatment of HBV-infected patients. Therefore, the detection of lamivudine-resistant mutants is of clinical importance. We have developed an oligonucleotide chip for the detection of lamivudine-resistant HBV which is rapid and accurate. The oligonucleotide chip consists of quality control probes, negative control probes, and specific oligonucleotide probes for the detection of lamivudine-resistant HBV. The specific probes consist of five probes for the detection of wild-type rtL180, rtM204, and rtV207 sequences and seven probes for the detection of HBV mutations. We tested 123 serum samples from patients with chronic HBV infection who had received lamivudine therapy. Eighty samples contained mutants with YMDD mutations. Among these, 17 contained rtM204V (YVDD), 24 contained rtM204I3 (YIDD3), 3 contained rtM204I2 (YIDD2), and 36 contained mixed types. We compared the results obtained with our oligonucleotide chip with those obtained by PCR-restriction fragment length polymorphism (RFLP) analysis and sequencing. The rate of concordance between the assay with the oligonucleotide chip and PCR-RFLP analysis for detection of the YMDD motif was 96.7%. The rate of concordance between the results obtained with the oligonucleotide chip for the detection of rtL180 and rtV207 and the results obtained by sequencing was 100%. Thus, the oligonucleotide chip is a reliable and useful tool for the detection of antiviral-resistant HBV.

Peptide Nucleic Acid Array for Detection of Point Mutations in Hepatitis B Virus Associated with Antiviral Resistance

ABSTRACT The detection of antiviral-resistant hepatitis B virus (HBV) mutations is important for monitoring the response to treatment and for effective treatment decisions. We have developed an array using peptide nucleic acid (PNA) probes to detect point mutations in HBV associated with antiviral resistance. PNA probes were designed to detect mutations associated with resistance to lamivudine, adefovir, and entecavir. The PNA array assay was sensitive enough to detect 102 copies/ml. The PNA array assay was able to detect mutants present in more than 5% of the virus population when the total HBV DNA concentration was greater than 104 copies/ml. We analyzed a total of 68 clinical samples by this assay and validated its usefulness by comparing results to those of the sequencing method. The PNA array correctly identified viral mutants and has high concordance (98.3%) with direct sequencing in detecting antiviral-resistant mutations. Our results showed that the PNA array is a rapid, sensitive, and easily applicable assay for the detection of antiviral-resistant mutation in HBV. Thus, the PNA array is a useful and powerful diagnostic tool for the detection of point mutations or polymorphisms.

Yield condition and compression characteristics of semi-solid material by upper-bound method

In semi-solid forging, it is necessary to control the forming variables accurately in order to make near net shape products. Generally, the defects of products may occur due to liquid segregation that can be caused by deformation, strain rate, and condition of friction. The liquid segregation is to be predicted by flow analysis. This paper presents upper bound analysis model using the new yield function proposed by Doraiveluet al. The model has been applied to analyze the simple compression process of semi-solid Sn-15%Pb alloys to confirm the usefulness of the yield function. The radial distribution of the liquid fraction at various strains, strain rates, and friction conditions between die and workpiece has been estimated.

Web-based Research Assistant Tools for Analysis of Microbial Diversity

The study of available genotypes (biodiversity analysis) in bacterial communities is of growing importance in several fields such as ecology, environmental technology, clinical diagnostics, etc. These culture-independent genotyping techniques, especially amplifying 16S rRNA genes, attempt to overcome some shortcomings of conventional cultivation method. Biodiversity analysis based on molecular technique were laborious for base-calling chromatogram, trimming primer sites, correcting strand directions, electing representative operation taxonomic units (OTU), etc. Also, biologists wanted intuitively to confirm results of the above processes. For making up these demands, we developed the web application based on Folder-Process-Filter (FPF) modeling with correspondence to classical Model-View-Controller model. The model of web application leads to keep virtues of simplicity and directness for development and management of the stepwise web interfaces. The web application was developed in Perl and CGI on Linux workstation. It can be freely accessed from http://home.pusan.ac.kr/～genome/tools/rat.htm.