Heechol Choi

Ambient Carbon Dioxide Capture by Boron-Rich Boron Nitride Nanotube

Carbon dioxides (CO(2)) emitted from large-scale coal-fired power stations or industrial manufacturing plants have to be properly captured to minimize environmental side effects. From results of ab initio calculations using plane waves [PAW-PBE] and localized atomic orbitals [ONIOM(wB97X-D/6-31G*:AM1)], we report strong CO(2) adsorption on boron antisite (B(N)) in boron-rich boron nitride nanotube (BNNT). We have identified two adsorption states: (1) A linear CO(2) molecule is physically adsorbed on the B(N), showing electron donation from the CO(2) lone-pair states to the B(N) double-acceptor state, and (2) the physisorbed CO(2) undergoes a carboxylate-like structural distortion and C═O π-bond breaking due to electron back-donation from B(N) to CO(2). The CO(2) chemisorption energy on B(N) is almost independent of tube diameter and, more importantly, higher than the standard free energy of gaseous CO(2) at room temperature. This implies that boron-rich BNNT could capture CO(2) effectively at ambient conditions.

Photodissociation Dynamics of Thiophenol-d1: The Nature of Excited Electronic States along the S-D Bond Dissociation Coordinate

The S-D bond dissociation dynamics of thiophenol-d1 (C6H5SD) pumped at 266, 243, and 224 nm are examined using the velocity map ion imaging technique. At both 266 and 243 nm, distinct peaks associated with X and A states of the phenylthiyl radical (C6H5S*) are observed in the D+ image at high and low kinetic energy regions, respectively. The partitioning of the available energy into the vibrational energy of the phenylthiyl radical is found to be enhanced much more strongly at 266 nm compared to that at 243 nm. This indicates that the pipi* electronic excitation at 266 nm is accompanied by significant vibrational excitation. Given the relatively large anisotropy parameter of -0.6, the S-D dissociation at 266 nm is prompt and should involve the efficient coupling to the upper-lying n(pi)sigma* repulsive potential energy surface. The optical excitation of thiophenol at 224 nm is tentatively assigned to the pisigma* transition, which leads to the fast dissociation on the repulsive potential energy surface along the S-D coordinate. The nature of the electronic transitions associated with UV absorption bands is investigated with high-level ab initio calculations. Excitations to different electronic states of thiophenol result in unique branching ratios and vibrational excitations for the fragment of the phenylthiyl radical in the two lowest electronic states.

Factors Affecting the Branching Ratio of Photodissociation: Thiophenol Studied through Quantum Wavepacket Dynamics

The photodissociation dynamics of thiophenol (PhSH) excited to the 1(1) ππ* state was investigated by time-dependent quantum wavepacket propagation within two-dimensional (2D) space consisting of the S-H bond and -SH torsion. We systematically studied the dependence of the branching ratio (Ã/X(~)) between the two electronic states of the phenylthiyl radical (PhS(.) ) on several factors of the 2D potential energy surfaces (PESs). The effect of a reduced initial barrier to the first ππ*/πσ* conical intersection (CI) was found to be marginal, whereas the effects of a reduced torsional barrier of -SH on the excited ππ* state and the mitigated slope of the πσ* PES between the first (ππ*/πσ*) and the second (πσ*/S0 ) CIs were noticeable. The effect of the slope on the branching ratio has never been previously noticed. It was shown that the branching ratio can be sufficiently above unity without pre-excitation of the torsion mode of -SH, which has been assumed so far.

Theoretical study of low-lying excited states of X2CY (X = F, Cl; Y = O, S) using the equation-of-motion coupled-cluster theory

The spectroscopic constants of the ground ( ) and low-lying excited states ( ) of Cl2CS, F2CS Cl2CO and F2CO were studied using the coupled-cluster and the equation-of-motion coupled-cluster singles and doubles (CCSD/EOM-CCSD) method. A comparison of the calculated results for Cl2CS with available experimental values shows that the results from the CCSD/EOM-CCSD method are quite reliable. Many other spectroscopic constants of the excited states of the four molecules are provided in this work. It is shown that the fluorescence corresponding to the S2→S1/S2→S0 transition is also expected in F2CS and F2CO as well as in Cl2CS, an already known violation of Kashas rule.

Structure of Pyridazine in the S1 State : Experiment and Theory

The molecular structure of pyridazine in the first electronically excited state (S(1)) is deduced from the combined use of resonance-enhanced two-photon ionization and mass-analyzed threshold ionization spectroscopic methods. The equation-of-motion coupled-cluster single and double (EOM-CCSD) calculation gives the distorted planar geometry for the most stable structure of the S(1) pyridazine. The symmetry constraint of C(2v) is relaxed to that of C(s), and consequently many in-plane vibrational modes are found to be optically active in both S(1)-S(0) and D(0)-S(1) excitation spectra, being appropriately assigned from the comparison of their frequencies with ab initio values. This indicates that the S(1)-S(0) excitation is partially localized, and provides an alternative explanation for the long-standing spectroscopic puzzle in S(1) pyridazine.

Electron impact elastic and excitation cross-sections of the isomers of C4F6 molecule for plasma modeling

We report the calculations of elastic (along with its symmetry components) and electronic excitation cross sections by electron impact of the three isomers of C4F6, namely, hexafluoro-1,3-butadiene (1,3-C4F6), hexafluoro-2-butyne (2-C4F6), and hexafluorocyclobutene (c-C4F6) belonging to the point groups C2, D3d, and C2v, respectively, using the R-matrix approach. The electron energy range is from 0.01 eV to 12 eV. We have employed the cc-pVTZ basis set for C and F atoms to generate self-consistent field molecular orbitals to construct the target states for all the isomers included in our calculations. All the target states are constructed by including correlation effects in a configuration interaction (CI) approach. The target properties such as vertical excitation energies and dipole moment of all the isomers are in reasonable agreement with the literature values. Differences in the cross sections of these isomers are strongly influenced by the effect of correlation and polarization effects and their geometrical extent. We have included the ground state and many excited states of each isomer in the trial wave function of the entire scattering system. The resulting elastic cross sections are compared with the available experimental results. The agreement is reasonably good for energies above 5 eV. The shape resonances detected at 2.57, 2.95, and 3.20 eV for c-C4F6, 1,3-C4F6, and 2-C4F6 isomers are associated with the negative anion formation of C3F3- as observed in the mass spectrometry experiments. We have also performed 1-state CI calculation for all the isomers that include only the correlated ground state. The position of resonances shifts to lower energies as the number of target states is increased compared to 1-state calculation for all the isomers. The elastic cross section for 2-C4F6 isomer is larger than the other isomers because of its larger spatial extent. The present cross section data are important for plasma simulation and modeling, especially related to fluorocarbon plasma.We report the calculations of elastic (along with its symmetry components) and electronic excitation cross sections by electron impact of the three isomers of C4F6, namely, hexafluoro-1,3-butadiene (1,3-C4F6), hexafluoro-2-butyne (2-C4F6), and hexafluorocyclobutene (c-C4F6) belonging to the point groups C2, D3d, and C2v, respectively, using the R-matrix approach. The electron energy range is from 0.01 eV to 12 eV. We have employed the cc-pVTZ basis set for C and F atoms to generate self-consistent field molecular orbitals to construct the target states for all the isomers included in our calculations. All the target states are constructed by including correlation effects in a configuration interaction (CI) approach. The target properties such as vertical excitation energies and dipole moment of all the isomers are in reasonable agreement with the literature values. Differences in the cross sections of these isomers are strongly influenced by the effect of correlation and polarization effects and their geo...

Low energy elastic cross section of fluoroacetylene by electron impact

Synopsis Electron impact low energy cross sections for fluoroacetylene is investigated for which there are no reported results in the literature. We have used various target models to compute accurate target properties and the best target model is used for the final scattering calculation. The fluorination effect in the cross section is studied by comparing the results with difluoroacetylene and acetylene.