Heinz-Bernhard Kraatz

Polymeric micelles as drug delivery vehicles

Though much progress has been made in drug delivery systems, the design of a suitable carrier for the delivery of hydrophobic drugs is still a major challenge for researchers. The use of micellar solutions of low molecular weight surfactants has been one of the popular methods for the solubilization of hydrophobic drugs; however, such surfactants suffer from high critical micelle concentration and concomitant low stabilities. In contrast to surfactants of low molecular masses, polymeric micelles are associated with general advantages like higher stability, tailorability, greater cargo capacity, non-toxicity and controlled drug release. Therefore, the current review article is focused on the engineering of the core of polymeric micelles for maximum therapeutic effect. For enhanced drug encapsulation capacity and getting useful insights into the controlled release mechanism we have reviewed the effects of temperature and pH on responsive polymeric micelles. The article also presents important research outcomes about mixed polymeric micelles as better drug carriers in comparison to single polymeric micelles.

Impedimetric Immobilized DNA-Based Sensor for Simultaneous Detection of Pb2+, Ag+, and Hg2+

An unlabeled immobilized DNA-based sensor was reported for simultaneous detection of Pb(2+), Ag(+), and Hg(2+) by electrochemical impedance spectroscopy (EIS) with [Fe(CN)(6)](4-/3-) as redox probe, which consisted of three interaction sections: Pb(2+) interaction with G-rich DNA strands to form G-quadruplex, Ag(+) interaction with C-C mismatch to form C-Ag(+)-C complex, and Hg(2+) interaction with T-T mismatch to form T-Hg(2+)-T complex. Circular dichroism (CD) and UV-vis spectra indicated that the interactions between DNA and Pb(2+), Ag(+), or Hg(2+) occurred. Upon DNA interaction with Pb(2+), Ag(+), and Hg(2+), respectively, a decreased charge transfer resistance (R(CT)) was obtained. Taking advantage of the R(CT) difference (ΔR(CT)), Pb(2+), Ag(+), and Hg(2+) were selectively detected with the detection limit of 10 pM, 10 nM, and 0.1 nM, respectively. To simultaneously (or parallel) detect the three metal ions coexisting in a sample, EDTA was applied to mask Pb(2+) and Hg(2+) for detecting Ag(+); cysteine was applied to mask Ag(+) and Hg(2+) for detecting Pb(2+), and the mixture of G-rich and C-rich DNA strands were applied to mask Pb(2+) and Ag(+) for detecting Hg(2+). Finally, the simple and cost-effective sensor could be successfully applied for simultaneously detecting Pb(2+), Ag(+), and Hg(2+) in calf serum and lake water.

Systematizing structural motifs and nomenclature in 1,n′-disubstituted ferrocene peptides

Ferrocene peptide conjugates display an array of structural features including helical ferrocene based chirality and a number of different intramolecular hydrogen bonding patterns. In this tutorial review we present a rigorous nomenclature for these systems, followed by a section that summarises and categorises the structures known to date. The issues discussed herein are of general relevance for all metallocene-based chiral transition metal catalysts and peptide turn mimetics.

Stimuli responsive materials : new avenues toward smart organic devices

“Smart” patternable polymer-based materials that can be designed from various molecular building blocks show great potential, as they may be used in many fields, including nanotechnology, biochemistry, organic and physical chemistry, and materials science. The focus of this highlight will be on the basic design characteristics of practical Stimuli Responsive Materials (SRMs), the wide range of potential applications and the challenges to be accomplished in this rapidly expanding area. In particular, recent developments are described which are related to two of the many fundamental aspects of stimuli triggered responses: those that are photo-triggered and those that are solvent triggered. These selected state-of-the-art examples demonstrate the large scope and diversity in terms of activation mechanism, response time and property control.

Ferrocene-peptido conjugates: From synthesis to sensory applications

The field of chemical and biological sensing is increasingly dependent on the availability of new functional materials that enhance the ability of the system to respond to chemical interactions. Organometallic bioconjugates derived from amino acids, peptides, proteins, peptide nucleic acids, and dendrimers have had a profound effect in this area and have endowed modern sensory systems with a superior performance. Owing to their fairly high stability, solubility in various solvents, and excellent redox properties, ferrocene and ferrocenyl conjugates have emerged as one of the most important classes of materials that enable direct observation of molecular interactions and as electron mediators. The low potential, reversible redox behavior of the ferrocene/ferrocenium couple is a unique property that finds widespread application in the design of sensory platforms. Currently, there is significant drive to exploit new organometallic systems, in which the presence of ferrocene acting as a redox center is critical and allows the design of highly sensitive electrochemical sensors for the sensing and recognition of a vast array of analytes.

Nanopore Analysis of β-Amyloid Peptide Aggregation Transition Induced by Small Molecules

β-Amyloid 42 (Aβ42) is the predominant form of the amyloid peptide, which is found in the plaques of the brains of Alzheimers (AD) patients and is one of the most abundant components in amyloid aggregates. Information of the Aβ42 aggregation states is essential for developing an understanding of the pathologic process of amyloidoses. Here, we used α-hemolysin (α-HL) pores to probe the different aggregation transition of Aβ42 in the presence of β-cyclodextrin (β-CD), a promoter of Aβ42 aggregations, and in the presence of Congo red (CR), an inhibitor of aggregations. Analyzing the characteristic transit duration times and blockade currents showed that β-CD and CR have opposite effects on the aggregation of Aβ42. Translocation events of the monomeric Aβ42 peptide were significantly lower in amplitude currents than protofilaments, and protofilaments were captured in the α-HL nanopore with a longer duration time. CR binds to Aβ42 and its peptide fibrils by reducing the aggregated fibrils formation. In this process it is assumed CR interferes with intermolecular hydrogen bonding present in the aggregates. In contrast to CR, β-CD promotes the aggregation of Aβ42. These differences can readily be analyzed by monitoring the corresponding characteristic blockade events using a biological α-HL nanopore.

AC impedance spectroscopy of native DNA and M-DNA.

Monolayers of thiol-labeled DNA duplexes of 15, 20, and 30 basepairs were assembled on gold electrodes. Electron transfer was investigated by electrochemical impedance spectroscopy with Fe(CN)(6)(3-/4-) as a redox probe. The spectra, in the form of Nyquist plots, were analyzed with a modified Randles circuit which included an additional component in parallel, R(x), for the resistance through the DNA. For native B-DNA R(x) and R(ct), the charge transfer resistance, both increase with increasing length. M-DNA was formed by the addition of Zn(2+) at pH 8.6 and gave rise to characteristic changes in the Nyquist plots which were not observed upon addition of Mg(2+) or at pH 7.0. R(x) and R(ct) also increased with increasing duplex length for M-DNA but both were significantly lower compared to B-DNA. Therefore, electron transfer via the metal DNA film is faster than that of the native DNA film and certain metal ions can modulate the electrochemical properties of DNA monolayers. The results are consistent with an ion-assisted long-range polaron hopping mechanism for electron transfer.

Structure-activity relationships of targeted RuII(η6-p-cymene) anticancer complexes with flavonol-derived ligands.

RuII(arene) complexes have been shown to be promising anticancer agents, capable of overcoming major drawbacks of currently used chemotherapeutics. We have synthesized RuII(η6-arene) compounds carrying bioactive flavonol ligands with the aim to obtain multitargeted anticancer agents. To validate this concept, studies on the mode of action of the complexes were conducted which indicated that they form covalent bonds to DNA, have only minor impact on the cell cycle, but inhibit CDK2 and topoisomerase IIα in vitro. The cytotoxic activity was determined in human cancer cell lines, resulting in very low IC50 values as compared to other RuII(arene) complexes and showing a structure-activity relationship dependent on the substitution pattern of the flavonol ligand. Furthermore, the inhibition of cell growth correlates well with the topoisomerase inhibitory activity. Compared to the flavonol ligands, the RuII(η6-p-cymene) complexes are more potent antiproliferative agents, which can be explained by potential multitargeted properties.

1,1′-Ferrocenoyl–oligoprolines. A synthetic, structural and electrochemical study

Abstract The preparations of the eight ferrocenoyl oligopeptides, 1,1′-(Pro–OBzl)2–Fc (1), 1,1′-(Pro–OMe)2–Fc (1a), 1,1′-(Pro2–OBzl)2–Fc (2), 1,1′-(Pro3–OBzl)2–Fc (3), 1,1′-(Pro4–OBzl)2–Fc (4), 1-(Pro2–OBzl)–1′-(OBt)–Fc (5), 1-(Pro3–OBzl)-1′–(OBt)–Fc (6), 1-(Pro4–OBzl)–1′-(OBt)–Fc (7) are described. Crystallographic studies were carried out for 1a, showing a 1,3′-configuration of the two substitutents. The growing oligoproline chain adopts a helical polyproline-II conformation in solution. Compounds 1–4 exhibit reversible one-electron oxidations of the ferrocene moiety, which is influenced by the length of the oligoproline chain. With growing peptide length, the molecule becomes easier to oxidize. For the mixed OBt–ester–oligoprolines, 5, 6 and 7, quasi-reversible oxidations are observed at slow scan rates, which vary with the oligoproline chain length.

Impedance based detection of pathogenic E. coli O157:H7 using a ferrocene-antimicrobial peptide modified biosensor.

Escherichia coli O157:H7 can cause life-threatening gastrointestinal diseases and has been a severe public health problem worldwide in recent years. A novel biosensor for the detection of E. coli O157:H7 is described here using a film composed of ferrocene-peptide conjugates, in which the antimicrobial peptide magainin I has been incorporated as the biorecognition element. Electrochemical impedance spectroscopy was employed to investigate the surface characteristics of the newly developed biosensor and to monitor the interactions between the peptide film and the pathogenic bacteria. X-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectrometry (ToF-SIMS) were employed to confirm the immobilization of ferrocene-conjugate onto the gold surface. Non-pathogenic E. coli K12, Staphylococcus epidermidis and Bacillus subtilis were used in this study to evaluate the selectivity of the proposed biosensor. The results have shown the order of the preferential selectivity of the method is E. coli O157:H7>non-pathogenic E. coli>gram positive species. The detection of E. coli O157:H7 with a sensitivity of 10(3)cfu/mL is enabled by the biosensor. The experimental conditions have been optimized and the plot of changes of charge transfer resistance (ΔRCT) and the logarithm of the cell concentration of E. coli O157:H7 shows a linear correlation in the range of 10(3)-10(7)cfu/mL with a correlation coefficient of 0.983.