Helder Marçal

Polyhydroxybutyrate and its copolymer with polyhydroxyvalerate as biomaterials: influence on progression of stem cell cycle.

Poly(3-hydroxybutyrate) (PHB) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) are biopolyesters reported to provide favorable microenvironments for cell culture and possess potential for tissue engineering applications. Both biopolymers have been investigated for applications in a variety of medical scenarios, including nerve and bone repair. This study investigated the influence these biomaterials exerted on cell cycle progression of olfactory ensheathing cells (OECs) and mesenchymal stem cells (MSCs) commonly used in the engineering of nerve and bone tissues. Cell cycle regulation is important for cell survival; analysis revealed that the biomaterials induced significant cell cycle progression in both MSCs and OECs. Significantly higher percentages of cells were cycled at synthesis (S) phase of the cycle on PHBV films compared to PHB, with MSCs more susceptible than OECs. Furthermore, detection of early stages of apoptotic activation showed significant differences in the two cell populations exhibiting necrosis and apoptosis when cultivated on the biomaterials. OECs compromised on PHB (5.6%) and PHBV (2.5%) compared to MSCs with 12.6% on PHB and 17% on PHBV. Significant differences in crystallinity and surface rugosity were determined between films of the two biomaterials, 88% and 1.12 μm for PHB and 76% and 0.72 μm for PHBV. While changes in surface properties may have influenced cell adhesion, the work presented here suggests that application of these biomaterials in tissue engineering are specific to cell type and requires a detailed investigation at the cell-material interface.

A comprehensive protein expression profile of extracellular matrix biomaterial derived from porcine urinary bladder

AIMS To generate a comprehensive profile of the protein composition of xenogeneic biomaterial, derived from porcine urinary bladder matrix (UBM). MATERIALS & METHODS Tunica layers and muscularis mucosa were removed from bladders using mechanical delamination. UBM was prepared using a solution of peracetic acid in ethanol, lyophilized then milled into powder. UBM biomaterial was subjected to tryptic digests and components separated using high-performance liquid chromatography with an ion trap mass spectrometer and identified through databases. RESULTS A repertoire of 129 proteins with neurotrophic, antiangiogenic and tumor-suppressive activities and those associated with tissue remodeling and wound repair were identified. CONCLUSION This study provides the first insight into the complex nature of the UBM and how its application may be tailored for specific applications in regenerative medicine. We propose that the UBM be further investigated for reconstructive and regenerative remodeling of cardiac and dermal tissues, as well as peripheral nerves.

BioPEGylation of polyhydroxybutyrate promotes nerve cell health and migration.

This study reports on the superior suitability of Polyhydroxybutyrate-polyethylene glycol hybrid polymers biosynthesised by Cupriavidus necator over PHB as biomaterials for tissue engineering. Incorporation of PEG106 (DEG) during PHB biosynthesis reduced crystallinity, molecular weight, and hydrophobicity while improving mechanical properties. In vitro olfactory ensheathing cell (OEC) proliferation was enhanced by cultivation on PHB-b-DEG films. Cultivation on PHB and PHB-b-DEG films showed no cytotoxic responses and cell viability and membrane integrity was sustained. PHB-b-DEG films promoted OECs entering into the DNA replication (S) phase and mitotic (G2-M) phase during the cell growth cycle and apoptosis was low. This study also confirmed an association between the level of neurite-outgrowth inhibitory protein (Nogo) and receptor pair Ig-like receptor B (PirB) expression and cell proliferation, both being down-regulated in cells grown on hybrid films when compared with PHB and asynchronous growth. Thus, DEG-terminated PHB-based biomaterials have great potential as biological scaffolds supporting nerve repair.

The effect of mesenchymal stem cell conditioned media on corneal stromal fibroblast wound healing activities

Aims To investigate the effects of conditioned media from mesenchymal stem cells (MSC) on the wound healing activities of corneal stromal fibroblasts. Methods Cell cycle analysis and early stage activation of apoptosis, chemotactic chambers and fibroblast-populated type I collagen gels were used to assess corneal stromal fibroblast proliferation, migration and contraction, respectively. Fibroblasts were obtained from human donor corneas and MSC from fresh rat bone marrow. MSC conditioned media and fibroblast culture medium (FCM), with and without calf serum supplementation, were compared. Results MSC conditioned media and serum-free FCM had an inhibitory effect on the progression of corneal fibroblasts through the cell cycle. There was a significant increase in the number of cells in the G0–G1 phase for MSC conditioned media and serum-free FCM (p=0.001, p=0.97 respectively). Fibroblast migration and relaxed and stressed gel contraction were significantly inhibited by MSC conditioned media and serum-free FCM compared with FCM with serum (all p=0.001). Glucose and lactate analysis confirmed that these factors were not contributing to this effect. Conclusion MSC conditioned media was found to inhibit the wound healing activities of corneal stromal fibroblasts in vitro. Putative factors secreted by MSC could be developed for therapeutic use in corneal repair.

Chitosan-vancomysin composite biomaterial as a laser activated surgical adhesive with regional antimicrobial activity.

We have used laser irradiation to enhance the natural adhesiveness of chitosan to form a thin film surgical adhesive. Prevention of infection at surgical sites often utilizes systemic provision of antibiotics with reduced local efficacy and potential side effects. In the work reported here, we investigate the bactericidal properties of laser-irradiated chitosan films and their impregnation with the antibiotic vancomycin. Despite strong efficacy in solution, chitosan films showed no antimicrobial activity against representatives of common pathogens Escherichia coli , Staphylococcus aureus , and S. epidermidis . In contrast, a composite of chitosan adhesive and the antibiotic vancomycin showed therapeutically significant release profiles greater that the Minimum Bactericidal Concentrations (MBCs) for the Staphylococci over a 28 day period. These composite films had greater crystallinity, up to 28 ± 3 compared to 8.9 ± 2%, for its unblended counterpart. Despite a significant increase in material strength from 31.4 ± 4 to 77.5 ± 5 MPa, flexibility was still maintained with an elongation to break around 5 ± 2% and fold endurance of approximately 30 ± 3-folds. Laser irradiation had no apparent effect on the release or activity of the antibiotic which survived transient temperatures at the film-tissue interface during infrared irradiation of around 54 °C. Furthermore, significant adhesive strength was still apparent, 15.6 ± 2 KPa. Thus, we have developed a laser-activated bioadhesive with the potential to close wounds while facilitating the prevention of microbial infection through local release of antibiotic targeted to the site of potential infection.

Sutureless sealing of penetrating corneal wounds using a laser-activated thin film adhesive.

To demonstrate the feasibility of a novel, thin film, laser‐activated adhesive in sealing penetrative corneal wounds with a view to replacing sutures in ophthalmic operations.

Chitosan as a Biomaterial: Influence of Degree of Deacetylation on Its Physiochemical, Material and Biological Properties

Chitosan is a biomaterial with a range of current and potential biomedical applications. Manipulation of chitosan degree of deacetylation (DDA) to achieve specific properties appears feasible, but studies investigating its influence on properties are often contradictory. With a view to the potential of chitosan in the regeneration of nerve tissue, the influence of DDA on the growth and health of olfactory ensheathing cells (OECs) was investigated. There was a linear increase in OEC proliferation as the DDA increased from 72 to 85%. This correlated with linear increases in average surface roughness (0.62 to 0.78 μm) and crystallinity (4.3 to 10.1%) of the chitosan films. Mitochondrial activity and membrane integrity of OECs was significantly different for OECs cultivated on chitosan with DDAs below 75%, while those on films with DDAs up to 85% were similar to cells in asynchronous growth. Apoptotic indices and cell cycle analysis also suggested that chitosan films with DDAs below 75% were cytocompatible but induced cellular stress, while OECs grown on films fabricated from chitosan with DDAs above 75% showed no significant differences compared to those in asynchronous growth. Tensile strength and elongation to break varied with DDA from 32.3 to 45.3 MPa and 3.6 to 7.1% respectively. DDA had no significant influence on abiotic and biotic degradation profiles of the chitosan films which showed approximately 8 and 20% weight loss respectively. Finally, perceived patterns in property changes are subject to change based on potential variations in DDA analysis. NMR examination of the chitosan samples here revealed significant differences depending upon which peaks were selected for integration; 6 to 13% in DDA values within individual samples. Furthermore, differences between DDA values determined here and those reported by the commercial suppliers were significant and this may also be a source of concern when selecting commercial chitosans for biomaterial research.

Application of Polyethylene Glycol to Promote Cellular Biocompatibility of Polyhydroxybutyrate Films

Polyhydroxybutyrate (PHB) is a biomaterial with potential for applications in biomedical and tissue engineering; however, its brittle nature and high crystallinity limit its potential. Blending PHB with a variety of PEGs produced natural-synthetic composite films composed of FDA-approved polymers with significant reductions in crystallinity, from 70.1% for PHB films to 41.5% for its composite with a 30% (w/w) loading of PEG2000. Blending also enabled manipulation of the material properties, increasing film flexibility with an extension to break of for PHB films and for films containing 30% (w/w) PEG106. Significant changes in the film surface properties, as measured by porosity, contact angles, and water uptake, were also determined as a consequence of the blending process, and these supported greater adhesion and proliferation of neural-associated olfactory ensheathing cells (OECs). A growth rate of cells per day for PHB films with 30% (w/w) PEG2000 loading compared to for PHB films was observed. Furthermore, while cytotoxicity of the films as measured by lactate dehydrogenase release was unaffected, biocompatibility, as measured by mitochondrial activity, was found to increase. It is anticipated that fine control of PEG composition in PHB-based composite biomaterials can be utilised to support their applications in medicinal and tissue engineering applications.

Cytotoxic Effects of Environmental Toxins on Human Glial Cells.

A bstractToxins produced by cyanobacteria and dinoflagellates have increasingly become a public health concern due to their degenerative effects on mammalian tissue and cells. In particular, emerging evidence has called attention to the neurodegenerative effects of the cyanobacterial toxin β-N-methylamino-L-alanine (BMAA). Other toxins such as the neurotoxins saxitoxin and ciguatoxin, as well as the hepatotoxic microcystin, have been previously shown to have a range of effects upon the nervous system. However, the capacity of these toxins to cause neurodegeneration in human cells has not, to our knowledge, been previously investigated. This study aimed to examine the cytotoxic effects of BMAA, microcystin-LR (MC-LR), saxitoxin (STX) and ciguatoxin (CTX-1B) on primary adult human astrocytes. We also demonstrated that α-lipoate attenuated MC-LR toxicity in primary astrocytes and characterised changes in gene expression which could potentially be caused by these toxins in primary astrocytes. Herein, we are the first to show that all of these toxins are capable of causing physiological changes consistent with neurodegeneration in glial cells, via oxidative stress and excitotoxicity, leading to a reduction in cell proliferation culminating in cell death. In addition, MC-LR toxicity was reduced significantly in astrocytes-treated α-lipoic acid. While there were no significant changes in gene expression, many of the probes that were altered were associated with neurodegenerative disease pathogenesis. Overall, this is important in advancing our current understanding of the mechanism of toxicity of MC-LR on human brain function in vitro, particularly in the context of neurodegeneration.

BioPEGylation of polyhydroxyalkanoates: influence on properties and satellite-stem cell cycle.

The addition of poly(ethylene glycol), PEG, to bioprocessing systems producing polyhydroxyalkanoates (PHAs), has been reported as a means of their molecular weight control and can also support bioPEGylation, resulting in hybrids with amphiphillic properties. However, the study of such natural-synthetic hybrids of PHA-b-PEG is still in its infancy. In this study, we report the influence of bioPEGylation of polyhydroxyoctanoate (PHO) on its physiochemical, material, and biological properties. Consistent with previous studies, bioPEGylation with diethylene glycol (DEG) showed a significant reduction in PHA molecular weight (57%). In comparison to solvent cast films of PHO, PHO-b-DEG films possessed a noticeable X-ray diffraction peak at 9.82 degrees and increased Youngs modulus of 11 Gpa (83%). Potential biocompatibility was investigated by measuring the early phase of apoptosis in myoblastic satellite-stem cells (C2C12). Comparative analysis of cell proliferation and progression in the presence of the mcl-PHA and its hybrid showed that the latter induced significant cell cycle progression: the first time a biomaterial has been shown to do so. Microtopographies of the film surfaces demonstrated that these differences were not due to changes in surface morphology; both polymers possessed average surface rugosities of 1.4 +/- 0.2 microm. However, a slight decrease in surface hydrophobicity (3.5 +/- 0.9 degrees) due to the hydrophilic DEG may have exerted an influence. The results support the further study of bioPEGylated PHAs as potential biomaterials in the field of tissue engineering.